Raymarine SmartPilot X-5 ST6002 Controller Quick Reference Manual

  • Hello! I am an AI chatbot trained to assist you with the Raymarine SmartPilot X-5 ST6002 Controller Quick Reference Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
D10625-1
®
86131-1
Tiller System
Quick Reference Guide
SmartPilot X-5
ST6002 Controller
Use disp to adjust lighting level.
Wait 10 sec to return to previous mode.
Use -1 or +1 to adjust response level.
Press disp to return to previous mode.
1 sec1 sec
Auto Tack
STARBOARD
Auto Tack
PORT
Wind
Wind
Wind
WIND
Autopilot response controls course keeping accuracy.
Higher response settings keep a tighter course but
increase the amount of drive activity and battery use.
Set to a level appropriate for your needs
To Adjust Lighting Level
To Automatically Steer
to a Fixed Wind Angle
Autotack
To Adjust Autopilot
Course-keeping Accuracy
Refer to the SmartPilot X-5 Tiller Operating
Guide for details
GMA
GMA
GMA
GMA
GMA
55˚
85˚
D10126-1
Display Layout
To activate the Autopilot
For Manual Control
To change the
Autopilot Heading
To follow a Route
set on a Chartplotter
standby
Press for
Manual Control
auto
Press to activate
the Autopilot
track
When the Autopilot
is activated, press
to follow a route
from a connected
navigation system.
Press again to accept
the new course
course change keys
Port 1˚ Starboard 1˚
Port 10˚ Starboard 10˚
disp
Press to display
data pages
Press for 1 second
for lamp control
Press for 3 seconds
for power off
x3x3
OK?OK?
Attach
TillerPilot
1
Remove
TillerPilot
2
2
1
3
GMA
GMA
GMA
GMA
GMA
GMA
GMA
GMA
GMA
GMA
/