CMP Clip-In 280 Bag Operating instructions

CMP
Brand
CMP
Model
Clip-In 280 Bag
Type
Operating instructions
CUSTOM MOLDED PRODUCTS | 36 HERRING ROAD, NEWNAN, GA 30265 | WWW.C-M-P.COMjh0614
®
AUTO CLEANER BAG
CMP 58307-280-100
INSTALLATION
1. Insert a at head screw driver in the small seam between the
Upper Clip and Lower Clip. Gently use screw driver to pry apart
Upper Clip and Lower Clip by levering screw driver around all
sides of the clips (similar to opening a paint can). When screw
driver has dislodged Upper Clip, use your hand to pull it the
rest of the way o.
2. Uninstall existing cleaner bag.
3. Slide the ber tting of the new Auto Cleaner Bag through the
Upper Clip. Install ber tting over the Lower Clip, lining up all
holes with the Lower Clip’s raised circles.
4. Slide Upper Clip back down over the ber tting and the Lower
Clip. Installation is now complete.
AUTO CLEANER
BAG
LOWER CLIP
MESH BAG
UPPER CLIP
LOWER CLIP
MESH BAG
FIBER FITTING
UPPER CLIP
LOWER CLIP
MESH BAG
FIBER FITTING
UPPER CLIP
  • Page 1 1

CMP Clip-In 280 Bag Operating instructions

CMP
Brand
CMP
Model
Clip-In 280 Bag
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents