LIGHT MY BRICKS 75330 Operating instructions

Type
Operating instructions
LEGO® DAGOBAH JEDI TRAINING
DIORAMA #75330
INSTALLATION GUIDE
LEGO DAGOBAH JEDI TRAINING DIORAMA 75330 LIGHT KIT INSTALL GUIDE
INSTALLATION GUIDE 2
Light My Bricks
LEGO DAGOBAH JEDI TRAINING DIORAMA
75330 INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO
Dagobah Jedi Training Diorama 75330 Light Kit.
This PDF details the instructions for the LED light kit only. If
you are wishing to purchase this product, please click here
to view the product page.
If you run into any issues, please refer to the troubleshoot-
ing section towards the end of this guide.
Have fun and enjoy!
LEGO DAGOBAH JEDI TRAINING DIORAMA 75330 LIGHT KIT INSTALL GUIDE
v
PACKAGE CONTENTS 3
PACKAGE CONTENTS: ASSORTED BRICKS:
1 x Orange 30cm Large Bit Light
1 x Green 30cm Large Bit Light
2 x Cool White 30cm Bit Light
2 x White 30cm Bit Light
1 x 6-Port Expansion Board
1 x Pulse Eects Board
4 x Adhesive Squares
1 x Round Plate 2x2 w/ Rounded Bottom - Trans Clear
4 x Round Plate 1x1 w/ Open Stud – Black
2 x Mod Plate 1x1 w/ Handle – Black
2 x Black 1x1 Tile w/ Clip Rounded Edge
1 x 5cm Connecting Cable
1x USB Power Cable
(Power Source not Included)
LEGO DAGOBAH JEDI TRAINING DIORAMA 75330 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin
Blueprint
Instructions
Final Product
Troubleshooting
Contact
5
8
9
24
25
30
LEGO DAGOBAH JEDI TRAINING DIORAMA 75330 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can re-
sult in bent pins inside the port or possible
overheating of the expansion board when
connected.
LEGO DAGOBAH JEDI TRAINING DIORAMA 75330 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 6
Before You Begin
Connecting Cable
Connectors To Strip Lights
Take extra care when inserting connectors
to ports on the Strip Lights. Connectors
can be inserted only one way. With the
Strip Light facing up, ensure the side of
the connector with the wires exposed is
facing down. If a plug won’t fit easily into
a port connector, don’t force it. Doing so
will damage the plug and the connector.
Connecting Micro Cable
Connectors To Micro
Expansion Board Ports
Take extra care when inserting the
micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit
Lights to Micro Expansion Boards is similar
to connecting lights and cables to Strip
Lights. With the expansion board facing
up, ensure the side of the connector with
the wires exposed is facing down. If a plug
won’t fit easily into a port connector, do
not force it. Use your fingernail to push the
plastic part of the connector to the micro
port.
LEGO DAGOBAH JEDI TRAINING DIORAMA 75330 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 7
Before You Begin
Installing Bit Lights Under
Lego® Bricks And Plates
When installing Bit Lights under LEGO®
pieces, ensure they are placed the correct
way up (Yellow LED component exposed).
You can either place them directly on top of
LEGO® studs or in between.
LEGO DAGOBAH JEDI TRAINING DIORAMA 75330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 8
BLUEPRINT
LEGO DAGOBAH JEDI TRAINING DIORAMA 75330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 9
INSTRUCTIONS
To ensure a smooth installation of
your light kit, please read and follow
each step carefully. If you run into
any issues, please refer to the online
troubleshooting guide.
LEGO DAGOBAH JEDI TRAINING DIORAMA 75330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 10
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
1
2
LEGO DAGOBAH JEDI TRAINING DIORAMA 75330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 11
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
3
Plate 2x2 W Rounded Bottom -
Trans Clear
Orange 30cm Large Bit Light
LEGO DAGOBAH JEDI TRAINING DIORAMA 75330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 12
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
4
Pulse Eects Board
The Pulse Eects
can be changed on
the Board at any
time by adjusting
the switch to the left,
middle or right.
LEGO DAGOBAH JEDI TRAINING DIORAMA 75330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 13
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
5
Connect the
Orange 30cm Large
Bit Light to the ‘OUT’
port of the Pulse
Eects Board.
5cm Connecting Cable
6-Port Expansion Board
Connect the 5cm
Connecting Cable
to the ‘IN’ port of the
Pulse Eects Board.
Green 30cm Large Bit Light
LEGO DAGOBAH JEDI TRAINING DIORAMA 75330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 14
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
6
Cool White 30cm Bit Light Black Round Plate 1x1
w/ Open Stud
Black 1x1 Plate Modified Plate
Rounded w/ Handle
7
LEGO DAGOBAH JEDI TRAINING DIORAMA 75330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 15
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
8
Bck 1x1 Tie w/ Cip
Rounded Edges
Black Round Plate 1x1
w/ Open Stud
LEGO DAGOBAH JEDI TRAINING DIORAMA 75330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 16
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
9
Connect the
Green 30cm Large
Bit Light (shorter
cable) to the ‘OUT’
port of the Pulse
Eects Board
Pull both cables
towards the back of
the set
Connect the
Spotlight (longer
cable) to the 6-Port
Expansion Board
LEGO DAGOBAH JEDI TRAINING DIORAMA 75330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 17
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
10 Cool White 30cm Bit Light Black Round Plate 1x1
w/ Open Stud
Black 1x1 Plate Modified Plate
Rounded w/ Handle
Bck 1x1 Tie w/ Cip
Rounded Edges
11
LEGO DAGOBAH JEDI TRAINING DIORAMA 75330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 18
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
12 Black Round Plate 1x1
w/ Open Stud
LEGO DAGOBAH JEDI TRAINING DIORAMA 75330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 19
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
13
Pull the Spotlight
cable towards the
back of the set
White 30cm Bit Light
LEGO DAGOBAH JEDI TRAINING DIORAMA 75330 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 20
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
14
White 30cm Bit Light
15
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31

LIGHT MY BRICKS 75330 Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI