LIGHT MY BRICKS 10276 Operating instructions

Type
Operating instructions
LEGO® COLOSSEUM
#10276 LIGHT KIT
INSTALLATION GUIDE
LEGO COLOSSEUM 10276 LIGHT KIT INSTALL GUIDE
INSTALLATION GUIDE 2
Light My Bricks
LEGO® COLOSSEUM #10276 LIGHT KIT
INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO®
Colosseum (10276) Light Kit.
This PDF details the instructions for the LED light & sound kit
only. If you are wishing to purchase this product, please
click here to visit the product page.
If you run into any issues, please refer to the troubleshooting
section towards the end of this guide.
Have fun and enjoy!
LEGO COLOSSEUM 10276 LIGHT KIT INSTALL GUIDE
PACKAGE CONTENTS 3
PACKAGE CONTENTS: LEGO PIECES:
11 x White 30cm Bit Lights *
5 x Warm White 30cm Large Bit Lights *
5 x Warm White 15cm Large Bit Lights
1 x Warm White Strip Light
1 x RGB Strip Light 28 LED 45CM
4 x 6-Port Expansion Boards
3 x 8-Port Expansion Boards *
14 × Black Round Plate 1x1 w/ Open Stud *
14 × Black 1x1 Modified Plate Rounded w/ Handle *
14 × Black Tile 1x1 w/ Clip *
7 × Trans Clear Slope 30 1x1x2/3 *
1 x RGB IR Control Board
1 x RGB Remote Control
1 x 15cm Connecting Cables
7 x 30cm Connecting Cable *
1 x 15cm RGB Connecting Cable
1 x USB Power Cable
(Power Source not Included)
* Indicates 1 extra component has been included just in case!
LEGO COLOSSEUM 10276 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin 5
Instructions 8
Final Product 44
Troubleshooting 45
Contact 50
LEGO COLOSSEUM 10276 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can
can result in bent pins inside the port or
possible overheating of the expansion
board when connected.
LEGO COLOSSEUM 10276 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 6
Before You Begin
Connecting Cable
Connectors To Strip Lights
Take extra care when inserting connectors
to ports on the Strip Lights. Connectors
can be inserted only one way. With the
Strip Light facing up, ensure the side of
the connector with the wires exposed is
facing down. If a plug won’t fit easily into
a port connector, don’t force it. Doing so
will damage the plug and the connector.
Connecting Micro Cable
Connectors To Micro
Expansion Board Ports
Take extra care when inserting the
micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit
Lights to Micro Expansion Boards is similar
to connecting lights and cables to Strip
Lights. With the expansion board facing
up, ensure the side of the connector with
the wires exposed is facing down. If a plug
won’t fit easily into a port connector, do
not force it. Use your fingernail to push the
plastic part of the connector to the micro
port.
LEGO COLOSSEUM 10276 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 7
Before You Begin
Installing Bit Lights Under
Lego® Bricks And Plates
When installing Bit Lights under LEGO®
pieces, ensure they are placed the correct
way up (Yellow LED component exposed).
You can either place them directly on top of
LEGO® studs or in between.
LEGO COLOSSEUM 10276 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 8
INSTRUCTIONS
To ensure a smooth installation of
your light kit, please read and follow
each step carefully. If you run into
any issues, please refer to the online
troubleshooting guide.
LEGO COLOSSEUM 10276 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 9
1
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Use the LEGO
Removal tool to
help disconnect the
technic ball joints in
order to seperate
sections
LEGO COLOSSEUM 10276 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 10
2
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
LEGO COLOSSEUM 10276 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 11
3
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Warm White 30cm
Large Bit Light Black Round Plate 1x1
w/ Open Stud
Black 1x1 Modified Plate
Rounded w/ Handle
Black Tile 1x1 w/ Clip
LEGO COLOSSEUM 10276 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 12
4
5
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
6
Warm White 15cm Large
Bit Light Black Round Plate 1x1
w/ Open Stud
Black 1x1 Modified Plate
Rounded w/ Handle
Black Tile 1x1 w/ Clip
LEGO COLOSSEUM 10276 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 13
7
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
LEGO COLOSSEUM 10276 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 14
89
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Warm White 15cm Large
Bit Light Black Round Plate 1x1
w/ Open Stud
Black 1x1 Modified Plate
Rounded w/ Handle
Black Tile 1x1 w/ Clip
LEGO COLOSSEUM 10276 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 15
10 11
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Connect all three
Bit Lights to the
Expansion Board
8-Port Expansion Board
USB Power Cable
Connect to a
USB Power Bank or
USB Wall Adaptor
(each sold
separately)
30cm Connecting Cable
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
LEGO COLOSSEUM 10276 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 16
12 13
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
8-Port Expansion Board
Warm White 15cm Large
Bit Light Black Round Plate 1x1
w/ Open Stud
Black 1x1 Modified Plate
Rounded w/ Handle
Black Tile 1x1 w/ Clip
LEGO COLOSSEUM 10276 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 17
14 15
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Black Round Plate 1x1
w/ Open Stud
Black 1x1 Modified Plate
Rounded w/ Handle
Black Tile 1x1 w/ Clip
Reconnect the
left side of the tile
first to avoid
snapping the cable.
Warm White 30cm
Large Bit Light
LEGO COLOSSEUM 10276 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 18
16
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
LEGO COLOSSEUM 10276 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 19
17
18
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
30cm Connecting Cable
Warm White Strip Light
Peel o the
adhesive protective
paper on the back of
the Strip Light.
LEGO COLOSSEUM 10276 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 20
19
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
30cm Connecting Cable
6-Port Expansion Board
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51

LIGHT MY BRICKS 10276 Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI