OFF
WARNING
DO NOT ATTEMPT TO INSTALL OR PERFORM MAINTENANCE ON THE
EQUIPMENT WHILE IT IS ENERGIZED. DEATH OR SEVERE PERSONAL
INJURY CAN RESULT FROM CONTACT WITH ENERGIZED EQUIPMENT.
ALWAYS VERIFY THAT NO VOLTAGE IS PRESENT BEFORE PROCEEDING.
Series C F-frame circuit breaker with current
limiter module - instruction leaflet for circuit
breaker and motor circuit protector
Effective April 2016
Supercedes March 2012Instruction Leaet IL01203016E
1
2
Series C F-frame circuit breaker with current
limiter module - instruction leaet for circuit
breaker and motor circuit protector
EATON www.eaton.com
Instruction Leaet IL01203016E
Effective April 2016
10 in-lb (1.1 N•m)
Phase Mounting Barriers
(Provided) Required, Line
Side Only.
Phase Barriers (Provided)
Required, Line Side Only.
Line
Mounted
Limiter
Mounting Barriers
(Provided) Required,
Line and Load Sides
of Breaker.
Phase Barriers (Provided)
Required, Line and Load
Sides of Breaker.
Load
Mounted
Limiter
Phase Barriers Can Be
Shortened to a Minimum
of 2” (51 mm).
2.000
(
51)
2
4
3
5
Hardware Required
FD Breaker 8-32, 1.5 in. long
Limiter Module 8-32, 3.5 in. long
3
Instruction Leaet IL01203016E
Effective April 2016
Series C F-frame circuit breaker with current
limiter module - instruction leaet for circuit
breaker and motor circuit protector
EATON www.eaton.com
For 40 A - 200 A
For 15 A - 35 A
ON
TRIP
OFF
RESET
Push to Trip
6
7
WARNING
INSTALL WIRE APPLICABLE TO THE HIGHEST RATING SHOWN ON
BREAKER.
TA250FJ Collar Torque Values 40 A - 200A For
Limiter Module
Wire Size (AWG) Torque (in-lb) Torque (Nm)
8 - 350 250 28.24
TA50FB Lug Torque Values For 15 A to 35 A
Wire Size (AWG) Torque (in-lb) Torque (Nm)
14 - 10 35 3.96
4
Series C F-frame circuit breaker with current
limiter module - instruction leaet for circuit
breaker and motor circuit protector
EATON www.eaton.com
Instruction Leaet IL01203016E
Effective April 2016
1.765
+.025
3.385
-.015
+.030
3.501
-.020
C
+.030
6.000
-.020
1.219
.218
.266
.750
.078
E
B
D
A
3.342
3.188
3.625
12.060
.300 WIDE CONDUCTOR
WITH n .219 HOLE.
LOAD END
LINE END
1.562
.375
.740
+.000
4.125
-.020
2.062
1.000
.500
LINE END
LOAD END
8
Breaker
Status
Dimension
A B C D E
On 3.07 2.92 3.96 3.40 3.33
Tripped 2.65 2.57 4.06 2.99 2.98
Off 2.08 2.14 4.12 2.42 2.56
Reset 1.98 2.05 4.11 2.30 2.48
5
Instruction Leaet IL01203016E
Effective April 2016
Series C F-frame circuit breaker with current
limiter module - instruction leaet for circuit
breaker and motor circuit protector
EATON www.eaton.com
4.125
12.039
.750
4X .687
4X 1.375
4.500
4X R.250
.594
1.189
2.313
2.906
5.835
4.689
2.063
2.875
4.125
12.039
.469
4X .687
4X 1.375
4.500
4X R.250
.594
1.189
2.313
2.906
5.839
4.689
2.063
1.906
FD LOAD MOUNTED LIMITER
LOAD END
LINE END
8X 8-32 UNC
BREAKER
HANDLE
C
L
FD LINE MOUNTED LIMITER
LOAD END
LINE END
8X 8-32 UNC
BREAKER
HANDLE
C
L
9
Series C F-frame circuit breaker with current
limiter module - instruction leaet for circuit
breaker and motor circuit protector
Effective April 2016
Eaton
Electrical Sector
1000 Eaton Boulevard
Cleveland, OH 44122
United States
877-ETN-CARE (877-386-2273)
Eaton.com
© 2016 Eaton
All Rights Reserved
Printed in USA
Publication No. IL01203016E / TBG001288
Part Number: IL01203016EH02
April 2016
Disclaimer of warranties and limitation of liability
The information, recommendations, descriptions, and safety notations
in this document are based on Eaton Corporation’s (“Eaton”)
experience and judgment, and may not cover all contingencies.
If further information is required, an Eaton sales office should be
consulted.
Sale of the product shown in this literature is subject to the terms
and conditions outlined in appropriate Eaton selling policies or other
contractual agreement between Eaton and the purchaser.
THERE ARE NO UNDERSTANDINGS, AGREEMENTS, WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF FITNESS
FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, OTHER
THAN THOSE SPECIFICALLY SET OUT IN ANY EXISTING CONTRACT
BETWEEN THE PARTIES. ANY SUCH CONTRACT STATES THE ENTIRE
OBLIGATION OF EATON. THE CONTENTS OF THIS DOCUMENT
SHALL NOT BECOME PART OF OR MODIFY ANY CONTRACT
BETWEEN THE PARTIES.
In no event will Eaton be responsible to the purchaser or user in
contract, in tort (including negligence), strict liability, or otherwise
for any special, indirect, incidental, or consequential damage or loss
whatsoever, including but not limited to damage or loss of use of
equipment, plant or power system, cost of capital, loss of power,
additional expenses in the use of existing power facilities, or claims
against the purchaser or user by its customers resulting from the use
of the information, recommendations, and descriptions contained
herein.
The information contained in this manual is subject to change
without notice.
-
1
-
2
-
3
-
4
-
5
-
6
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Eaton AMT Vari-Depth Instruction Leaflet
-
-
-
-
-
Eaton Series NRX Installation Instructions Manual
-
-
-
-
Eaton TA1000NB1 User manual