Skyfan SKY1303WHC2 is an intelligent energy-saving DC ceiling fan that combines stylish design with advanced technology to provide optimal comfort and efficiency in your home. With its powerful DC motor, it delivers whisper-quiet operation and significant energy savings compared to traditional AC fans.
Skyfan SKY1303WHC2 is an intelligent energy-saving DC ceiling fan that combines stylish design with advanced technology to provide optimal comfort and efficiency in your home. With its powerful DC motor, it delivers whisper-quiet operation and significant energy savings compared to traditional AC fans.
Intelligent energy saving DC technology
With LED (-L) model
Images are for reference only and may vary slightly from actual product.
Ceiling Fan Installation Manual
MODELS:
SKYWH"2*86'"+
Thank you for purchasing this quality Ventair DC ceiling fan. To ensure correct function and safety,
please read all instructions before using the product and keep all instructions for future reference.
CAUTION
Read Instructions Carefully
For Safe Installation and Fan
Operation
MUST BE
INSTALLED BY
A LICENSED
ELECTRICIAN
DIY
0,21)'+#"'+!)20#,$$,/*##1'+%1&#*'+'*2*#)#!1/'!)0$#16,$
1&'001+"/"
)#0#+,1#4//+164')) #3,'"'$'+01))1',+'04'1&,21+))-,)#"'0!,++#!1',+'+!,/-,/1#"
'+1&#$'5#"4'/'+%'+!!,/"+!#4'1&1'/'+%/2)#0
5*-)#$$+'0!,++#!1#"1,!'/!2'11&1!+ #'0,)1#"3'+))-,)#0$#1604'1!&11&#
04'1!& ,/"1&#+1&'0'0!,+0'"#/#"1, #+))-,)#"'0!,++#!1',+1,1&#!#')'+%$+#)#!1/'!)
!'/!2'1*##1'+% 1&#/#.2'/#*#+10,$!)20#,$
0(,&*$.-*$ 04(1"' -, 1'$ "1(3$ -% 1'$ /$"$(3$/ (,.21 -% /$+-1$ "-,1/-* +201 *0-
!$(,"*2#$# (, 1'$ 4(/(,& ,# *-" 1$# (, 1'$ 0 +$ /--+ 0 1'$ "$(*(,& % ,0$$ 4(/(,&
#( &/ +
%2/+::63+8-/3=89>38>/8./.09<?=/,C:/<=98=38-6?.381-236.</8A3>2</.?-/.:2C=3-+6=/8=9<C
9<7/8>+6-+:+,363>3/=9<6+-590/B:/<3/8-/+8.589A6/.1/?86/==>2/C2+@/,//813@/8=?:/<@3=398
9<38=><?->398-98-/<8381>2/?=/90>2/+::63+8-/,C+:/<=98</=:98=3,6/09<>2/3<=+0/>C
236.</8=29?6.,/=?:/<@3=/.>9/8=?</>2+>>2/C.989>:6+CA3>2>2/+::63+8-/
%2/=><?->?</>9A23-2>2/0+83=>9,/79?8>/.7?=>,/-+:+,6/90=?::9<>381+A/312>9051
%2/03B381:938>98>2/-/36381</;?3</=+=963.,<+-381=><?->?</=?-2+=%37,/<891138=9<493=>=
%2/,<+-381=29?6.,/,?>>/.?:03<76C+8.=/-?</6C>9>2/,+-590+8C898=><?->?<+6<990381:+8/6
=?-2+=:6+=>/<9<C:<9-5>9/8=?</=+0/>C+8.9:>37?7:/<09<7+8-/90>2/0+8
%2/0+8=29?6.,/79?8>/.=9>2+>>2/,6+./=+</+>6/+=>7+,9@/>2/0699<
!86C+63-/8=/./6/-><3-3+8=29?6.2+8.6/>2/38=>+66+>398
(# 0 ?8?=?+6 A9,,6381 9< 9=-366+>381 79@/7/8> 3=9,=/<@/. 377/.3+>/6C =>9: ?=381 >2/
-/363810+8+8.-98>+->>2/7+8?0+->?</<3>==/<@3-/+1/8>9<=?3>+,6C;?+6303/.:/<=98=
E9 89> .3=:9=/ 90 /6/-><3-+6 +::63+8-/= += ?8=9<>/. 7?83-3:+6 A+=>/ ?=/ =/:+<+>/
-966/->3980+-363>3/= 98>+-> C9?< 69-+6 19@/<87/8> 09< 3809<7+>398</1+<.381>2/-966/->398
=C=>/7= +@+36+,6/ 0 /6/-><3-+6 +::63+8-/= +</ .3=:9=/. 90 38 6+8.0366= 9< .?7:=
2+D+<.9?= =?,=>+8-/= -+8 6/+5 38>9 >2/ 1<9?8. A+>/< +8. 1/> 38>9 >2/ 099. -2+38
.+7+1381C9?< 2/+6>2+8.A/66,/381
0,21)'+#"'+!)20#,$$,/*##1'+%1&#*'+'*2*#)#!1/'!)0$#16,$
1&'001+"/"
)#0#+,1#4//+164')) #3,'"'$'+01))1',+'04'1&,21+))-,)#"'0!,++#!1',+'+!,/-,/1#"
'+1&#$'5#"4'/'+%'+!!,/"+!#4'1&1'/'+%/2)#0
5*-)#$$+'0!,++#!1#"1,!'/!2'11&1!+ #'0,)1#"3'+))-,)#0$#1604'1!&11&#
04'1!& ,/"1&#+1&'0'0!,+0'"#/#"1, #+))-,)#"'0!,++#!1',+1,1&#!#')'+%$+#)#!1/'!)
!'/!2'1*##1'+% 1&#/#.2'/#*#+10,$!)20#,$
0(,&*$.-*$ 04(1"' -, 1'$ "1(3$ -% 1'$ /$"$(3$/ (,.21 -% /$+-1$ "-,1/-* +201 *0-
!$(,"*2#$# (, 1'$ 4(/(,& ,# *-" 1$# (, 1'$ 0 +$ /--+ 0 1'$ "$(*(,& % ,0$$ 4(/(,&
#( &/ +
%2/ +::63+8-/3=89> 38>/8./.09< ?=/,C:/<=98=38-6?.381-236.</8 A3>2</.?-/.:2C=3-+6 =/8=9<C
9< 7/8>+6 -+:+,363>3/= 9< 6+-590 /B:/<3/8-/+8.589A6/.1/ ?86/==>2/C2+@/,//813@/8=?:/<@3=398
9< 38=><?->398-98-/<8381>2/?=/90 >2/+::63+8-/,C+:/<=98</=:98=3,6/09< >2/3< =+0/>C
236.</8 =29?6. ,/ =?:/<@3=/. >9 /8=?</ >2+> >2/C .9 89> :6+C A3>2 >2/ +::63+8-/
%2/=><?->?</>9A23-2>2/0+83=>9,/79?8>/.7?=>,/-+:+,6/90=?::9<>381+A/312>90 51
%2/03B381:938>98>2/-/36381</;?3</=+=963.,<+-381=><?->?</=?-2+=%37,/< 891138=9< 493=>=
%2/,<+-381=29?6.,/,?>>/.?:03<76C+8.=/-?</6C>9>2/,+-590 +8C898=><?->?<+6 <990381:+8/6
=?-2+=:6+=>/< 9< C:<9-5>9/8=?</=+0/>C+8.9:>37?7 :/<09<7+8-/90 >2/0+8
%2/ 0+8=29?6.,/79?8>/.=9>2+> >2/,6+./=+</+> 6/+=> 7 +,9@/>2/0699<
!86C+63-/8=/./6/-><3-3+8=29?6.2+8.6/>2/38=>+66+>398
(# 0 ?8?=?+6 A9,,6381 9< 9=-366+>381 79@/7/8> 3= 9,=/<@/. 377/.3+>/6C =>9: ?=381 >2/
-/363810+8+8.-98>+-> >2/7+8?0+->?</< 3>==/<@3-/+1/8> 9< =?3>+,6C;?+6303/.:/<=98=
E 9 89> .3=:9=/ 90 /6/-><3-+6 +::63+8-/= += ?8=9<>/. 7?83-3:+6 A+=>/ ?=/ =/:+<+>/
-966/->3980+-363>3/=98>+->C9?<69-+619@/<87/8>09<3809<7+>398</1+<.381>2/-966/->398
=C=>/7= +@+36+,6/ 0 /6/-><3-+6 +::63+8-/= +</ .3=:9=/. 90 38 6+8.0366= 9< .?7:=
2+D+<.9?= =?,=>+8-/= -+8 6/+5 38>9 >2/ 1<9?8. A+>/< +8. 1/> 38>9 >2/ 099. -2+38
.+7+1381C9?<2/+6>2+8.A/66,/381
0,21)'+#"'+!)20#,$$,/*##1'+%1&#*'+'*2*#)#!1/'!)0$#16,$
1&'001+"/"
)#0#+,1#4//+164')) #3,'"'$'+01))1',+'04'1&,21+))-,)#"'0!,++#!1',+'+!,/-,/1#"
'+1&#$'5#"4'/'+%'+!!,/"+!#4'1&1'/'+%/2)#0
5*-)#$$+'0!,++#!1#"1,!'/!2'11&1!+ #'0,)1#"3'+))-,)#0$#1604'1!&11&#
04'1!& ,/"1&#+1&'0'0!,+0'"#/#"1, #+))-,)#"'0!,++#!1',+1,1&#!#')'+%$+#)#!1/'!)
!'/!2'1*##1'+%1&#/#.2'/#*#+10,$!)20#,$
0(,&*$.-*$ 04(1"' -, 1'$ "1(3$ -% 1'$ /$"$(3$/ (,.21 -% /$+-1$ "-,1/-* +201 *0-
!$(,"*2#$# (, 1'$ 4(/(,& ,# *-" 1$# (, 1'$ 0 +$ /--+ 0 1'$ "$(*(,& % ,0$$ 4(/(,&
#( &/ +
%2/ +::63+8-/3=89> 38>/8./.09< ?=/,C:/<=98=38-6?.381-236.</8 A3>2</.?-/.:2C=3-+6 =/8=9<C
9< 7/8>+6 -+:+,363>3/= 9< 6+-590 /B:/<3/8-/+8.589A6/.1/ ?86/==>2/C2+@/,//813@/8=?:/<@3=398
9< 38=><?->398-98-/<8381>2/?=/90 >2/+::63+8-/,C+:/<=98</=:98=3,6/09< >2/3< =+0/>C
236.</8 =29?6. ,/ =?:/<@3=/. >9 /8=?</ >2+> >2/C .9 89> :6+C A3>2 >2/ +::63+8-/
%2/=><?->?</>9A23-2>2/0+83=>9,/79?8>/.7?=>,/-+:+,6/90=?::9<>381+A/312>90 51
%2/03B381:938>98>2/-/36381</;?3</=+=963.,<+-381=><?->?</=?-2+=%37,/< 891138=9< 493=>=
%2/,<+-381=29?6.,/,?>>/.?:03<76C+8.=/-?</6C>9>2/,+-590 +8C898=><?->?<+6 <990381:+8/6
=?-2+=:6+=>/< 9< C:<9-5>9/8=?</=+0/>C+8.9:>37?7 :/<09<7+8-/90 >2/0+8
%2/ 0+8=29?6.,/79?8>/.=9>2+> >2/,6+./=+</+> 6/+=> 7 +,9@/>2/0699<
!86C+63-/8=/./6/-><3-3+8=29?6.2+8.6/>2/38=>+66+>398
(# 0 ?8?=?+6 A9,,6381 9< 9=-366+>381 79@/7/8> 3= 9,=/<@/. 377/.3+>/6C =>9: ?=381 >2/
-/363810+8+8.-98>+-> >2/7+8?0+->?</< 3>==/<@3-/+1/8> 9< =?3>+,6C;?+6303/.:/<=98=
E9 89> .3=:9=/ 90 /6/-><3-+6 +::63+8-/= += ?8=9<>/. 7?83-3:+6 A+=>/ ?=/ =/:+<+>/
-966/->3980+-363>3/= 98>+-> C9?< 69-+6 19@/<87/8> 09< 3809<7+>398</1+<.381>2/-966/->398
=C=>/7= +@+36+,6/ 0 /6/-><3-+6 +::63+8-/= +</ .3=:9=/. 90 38 6+8.0366= 9< .?7:=
2+D+<.9?= =?,=>+8-/= -+8 6/+5 38>9 >2/ 1<9?8. A+>/< +8. 1/> 38>9 >2/ 099. -2+38
.+7+1381C9?< 2/+6>2+8.A/66,/381
2
6. Only a licensed electrician should complete the installation.
8. WARNING: Light and fan must be connected to the same phase. Before servicing, ensure both light
and fan circuits are disconnected.
&8:+-5>2/0+8+8.-+</0?66C3./8>30C>2/:+<>= "6/+=/</0/< >931
(&
-2,1(,&!/ ")$1 5
-2,1(,&!/ ")$1 5
/$ 00$+!*$#% ,+-1-/ #-4,/-# " ,-.6
,#!-11-+ "-3$/ 5
/$ 00$+!*$#% ,+-1-/ #-4,/-# " ,-.6
,#*(&'1 5
* #$05
* #$05
$+-1$ "-,1/-*5
$+-1$ "-,1/-* 5
$"$(3$/ 5
$"$(3$/ 5
* ,"(,&)(15
* ,"(,&)(15
* #$0"/$405
* #$ 0"/$405
--# 0"/$40%-/ +-2,1(,& !/ ")$1 5
--# 0"/$4 %-/ 0 %$164(/$5
--# 0"/$40%-/ +-2,1(,& !/ ")$1 5
--# 0"/$4 %-/ 0 %$164(/$5
$ * '+ &#!($,/+6"*%#1,1&#$+ #$,/#'+01))1',+
*%# */(0,/0!/1!�/#+,1!,3#/#" 6'+&,*# 4//+16+1&'0!0#-/,"2!1
0&,2)" #/#12/+#" 1,-)!#,$-2/!&0#$,//#-)!#*#+1
&8:+-5>2/0+8+8.-+</0?66C3./8>30C>2/:+<>= "6/+=/</0/< >931
(&
-2,1(,&!/ ")$1 5
-2,1(,&!/ ")$1 5
/$ 00$+!*$#% ,+-1-/ #-4,/-# " ,-.6
,#!-11-+ "-3$/ 5
/$ 00$+!*$#% ,+-1-/ #-4,/-# " ,-.6
,#*(&'1 5
* #$05
* #$05
$+-1$ "-,1/-*5
$+-1$ "-,1/-* 5
$"$(3$/ 5
$"$(3$/ 5
* ,"(,&)(15
* ,"(,&)(15
* #$0"/$405
* #$ 0"/$405
--# 0"/$40%-/ +-2,1(,& !/ ")$1 5
--# 0"/$4 %-/ 0 %$164(/$5
--# 0"/$40%-/ +-2,1(,& !/ ")$1 5
--# 0"/$4 %-/ 0 %$164(/$5
$ * '+ &#!($,/+6"*%#1,1&#$+ #$,/#'+01))1',+
*%# */(0,/0!/1!�/#+,1!,3#/#" 6'+&,*# 4//+16+1&'0!0#-/,"2!1
0&,2)" #/#12/+#" 1,-)!#,$-2/!&0#$,//#-)!#*#+1
1. Mounting bracket x 1
2. Pre-assembled fan motor, down rod, canopy
and bottom cover x 1
3. Blades x 3
4. Remote Control x 1
5. Receiver x 1
6. Balancing Kit x 1
7. Blade screws x 6
8. Wood screws for mounting bracket x 2
Wood screw for safety wire x 1
1. Mounting bracket x 1
2. Pre-assembled fan motor, down rod, canopy
and LED light x 1
3. Blades x 3
4. Remote Control x 1
5. Receiver x 1
6. Balancing Kit x 1
7. Blade screws x 6
8. Wood screws for mounting bracket x 2
Wood screw for safety wire x 1
3
Skyfan WITHOUT LIGHT Skyfan WITH LIGHT
Unpack the fan carefully and identify all parts. Please refer to Fig 1.
Fig 1.
Please note: Check for any damage to the fan before installation.
Damage, marks or scratches are not covered by the in home warranty. In this case,
product should be returned to place of purchase for a replacement.
(5 x 16mm)
(6 x 50mm)
(6 x 50mm)
(6 x 50mm)
(6 x 50mm)
(2 pcs R03 1.5V AAA Batteries
included. Wood screws x mm).
(2 pcs R03 1.5V AAA Batteries
included. Wood screws x 2mm).
(5 x 16mm)
•%2/-/363810+87?=>,/38=>+66/.38+69-+>398=9>2+>>2/,6+./=2+@/+73837?777=:+-381
0<97>2/>3:90>2/,6+./>9>2/8/+</=>9,4/->=9<A+66=
•$/-?</>2/2+81381,<+-5/>>9>2/-/36381493=>9<=><?->?</>2+>3=-+:+,6/90-+<<C381+69+.90+>6/+=>
51A3>2>2/>A93B381=-</A=:<9@3./.8=?</+>6/+=>7790>2/=-</A3=>2</+./.38>9>2/
=?::9<>=><?->?</
&# .!(#0$'4'+%/!.#3/-.,2'"#".#$,.1/#3'0&3,,"#+/0.1!01.#/,+)5&#/#
/!.#3/.#"#/'%+#"/-#!'$'!))5$,.0&'/-1.-,/#+"1/#,$,0&#.05-#/,$/!.#3/ '# 1%)#
&#"#"/!.#3 *5 2,'"0&# 3..+05
,. /0.1!01.#/ ,0&#. 0&+3,," 0&# --.,-.'0# /!.#3 05-# # 1/#"
•
(&
+%)#"#')'+%+/0))0',+
%23=0+82+81381=C=>/7=?::9<>=+7+B37?7 ./1<//+816/.-/3638138=>+66+>398
"6/+=/ 89>/ >2/ %+,98>2/2+81,<+-5/>>2+>=3>=38>2/1<99@/98>2/2+81381,+66 =29?6.,/
:9=3>398/.+> >2/2312/=> :938> >9/8=?</-9<</-> 9:/<+>398
31=29A312/</+6=9
&
%23==29?6.-97/+0>/<
2+81381>2/0+8
•%2/ -/363810+87?=> ,/38=>+66/.38+69-+>398=9>2+> >2/,6+./=2+@/+73837?7 77 =:+-381
0<97 >2/>3:90 >2/,6+./>9>2/8/+</=> 9,4/->=9< A+66=
•$/-?</ >2/ 2+81381 ,<+-5/> >9 >2/ -/36381 493=> 9< =><?->?</ >2+> 3= -+:+,6/ 90 -+<<C381 + 69+. 90 +> 6/+=>
51 A3>2>2/ >A93B381 =-</A=:<9@3./. 8=?</+> 6/+=> 77 90 >2/=-</A 3=>2</+./.38>9>2/
=?::9<>=><?->?</
&# .!(#0$'4'+%/!.#3/-.,2'"#".#$,.1/#3'0&3,,"#+/0.1!01.#/,+)5&#/#
/!.#3/.#"#/'%+#"/-#!'$'!))5$,.0&'/-1.-,/#+"1/#,$,0&#.05-#/,$/!.#3/ '# 1%)#
&#"#"/!.#3 *5 2,'"0&# 3..+05
,. /0.1!01.#/ ,0&#. 0&+3,," 0&# --.,-.'0# /!.#3 05-# # 1/#"
•
(&
+%)#"#')'+% +/0))0',+
%23=0+82+81381=C=>/7=?::9<>=+7+B37?7 ./1<//+816/.-/3638138=>+66+>398
"6/+=/ 89>/ >2/ %+,98>2/2+81,<+-5/>>2+>=3>=38>2/1<99@/98>2/2+81381,+66 =29?6.,/
:9=3>398/.+> >2/2312/=> :938> >9/8=?</-9<</-> 9:/<+>398
31=29A312/</+6=9
&
%23==29?6.-97/+0>/<
2+81381>2/0+8
8=/<>>2/,6+./=B38>9>2/,6+./296.381=69>=98>2/79>9<29?=381=63./.9A8A+<.+8.-63-538>9
:9=3>398H
8=/<>>2/=+0/>C=-</A=,/381-+</0?689>>99@/<>312>/8
9@/79>9<29?=381-+89:C.9A8A+<.?8>36-9@/<381>2/79>9<29?=381
30> >2/ 0+8 +==/7,6C 98>9 >2/ 79?8>381 ,<+-5/> 8=?</ >2+> =69> 90 >2/ 2+81/< ,+66 3= 0?66C
+6318/./81+1/.A3>2 >2/%+, 90 >2/79?8>381,<+-5/> >9:</@/8> >2/0+80<97 <9>+>381A2/838
9:/<+>398 31
(&
89
9>9<29?=381-+89:C
$69>
PLEASE NOTE:
3GDAQ@BJDSkWHMFRBQDVROQNUHCDC@QDENQTRDVHSGSGDVNNCDMRSQTBSTQDRNMKX3GDRDRBQDVR@QD
CDRHFMDCRODBHkB@KKXENQSGHROTQONRD@MCTRDNENSGDQSXODRNERBQDVRHD!TFKDGD@CDCRBQDVRL@X
void the warranty.
For structures other than wood, the appropriate screw type MUST be used.
4
3. ove motor housing canopydownward until covering the motor housing
operation. (Fig.6)
ove motoove moto
housing canopy downward until covering the motor housing.
slot (A)of the hanger ball is fully
Tab (B) of the mounting bracket to prevent the fan from rotating when in
Fig. 3
FAN
1. Insert the blades (x3) into the blade holding slots on the motor housing, slide
position
2. Insert the 2 safety screws ,being careful not to over-tighten
3. ove motor housing canopy downward until covering the motor housing.
slot (A)of the
Tab (B) of the mounting bracket to prevent the fan
operation. (Fig.6)
Fig. 3
FAN
Safety screws
Slot
4
NOTE: The bracket fixing screws provided are for use with wooden structures
screws are designed specifically forthis purpose, and use of other types of sc
headed screw, may void the warranty.
For structures other than wood, the appropriate screw type MUST be used.
•Secure the safety wire to the ceiling joist or other suitable x
Fig. 3
Angled Ceiling Installation
This fan hanging system supportsamaximum 15-degree angled ceiling installation.
Please note: the Tab(B)on the hang bracket that sits in the groove (A)on the hangi
positioned at the highest point to ensure correct operation.(FIG 6)
Fig 4 (show Fig5here also
This should come after
hanging the fan
4
NOTE: The bracket fixing screws provided are for use
screws are designed specifically forthis purpose, and
headed screw, may void the warranty.
For structures other than wood, the appropriate scr
•Secure the safety wire to the ceiling joist
Fig. 3
Angled Ceiling Installation
This fan hanging system supports a maximum 15-degree
Please note: the Tab(B)on the hang bracket that sits i
positioned at the highest point to ensure correct operati
Fig 4 (show Fig5here
This should co
hanging the f
5
Lift the fan assembly onto the mounting bracket. Ensure that slot (A) of the hanger ball is fully
aligned/engaged with the Tab (B) of the mounting bracket (C) to prevent the fan from rotating
when in operation. Fig. 3)
This fan hanging system supports a maximum 15-degree angled installation. (Fig 4)
Please note: the Tab (B) on the hanging bracket that sits in the groove (A) on the hanging ball
should be positioned at the highest point to ensure correct operation.
Secure the safety wire to
the ceiling joist or other suit-
Highest Point
• Complete the electrical connection at the mounting bracket terminal block.
.).6 giF ot refeR( .ecnailppa lacirtcele a si CD nafykS :ETON
• Connect fan to the receiver (can be done before or after sliding receiver into place).
A. For fan models without light, plug cable marked ‘motor’ into remote control box.
See Fig 7.2
B. For fan models with light, plug cable marked ‘motor’ and ‘LED’ into remote control box.
See Fig 7.1
• Slide receiver into position in the hanging bracket making sure the AC input connecter on
the receiver is aligned with the AC port on the receiver. Refer Fig 7.1. on page 7.
u
a
scr
e
c
u
a
scr
e
c
motor housing, slide dow
of the hange
to prevent the fan
screws provided are for use with wooden structures on
screws are designed specifically forthis purpose, and use of other types of sc
Secure the safety wire to the ceiling joist or other suitable
on the hangi
screws provided are for use
screws are designed specifically forthis purpose, and use
For structures other than wood, the appropriate scre
Secure the safety wire to the ceiling joist
degree ang
Tab (B) on the hangbracket that sits in t
positioned at the highest point to ensure correct operati
(show Fig 5 here also
This should co
hanging the fan
et fixing screws provided are for use
ed specifically forthis purpose, and
e
gree
uld co
down
hanger ball is fully
from rotating when in
only
ews,
ng point.
g ball should be
se with wooden structures only
nd use of other types of screws,
ew type MUST be used.
or other suitable xing point.
e
the groove (A)
on.
also
ome after
an
down
hanger ball is fully
from rotating when in
only
ews,
ng point.
g ball should be
se with wooden structures only
nd use of other types of screws,
ew type MUST be used.
or other suitable xing point.
e
the groove (A)
on.
also
ome after
an
de downwardand click into
he hanger ball is fully
from rotating when in
es only. These
ews, ie, bugle
ng point.
(FIG 4)
ng ball should be
use with wooden structures only. These
and use of other types of screws, ie, bugle
screw type MUST be used.
or other suitable ng point.
ee angled ceiling installation. (FIG 4)
t sits in the groove (A) on the hanging ball should be
on. (FIG 6)
re also
come after
fan
6
Fig. 6.
Below is an example / guide for the electrical installer for maintaining
wiring to the Skyfan DC’s terminal block.
STEP 1. Prepare the supply wires as
shown.
Note: 5mm bare copper (L & N), and
20-30mm single sheath (L & N) from the
double insulated supply cable.
20-30mm
5mm
Double Insulated supply cable
STEP 2. Prepare the supplied plastic tubing
(or similar) to the same length and place over
the 20-30mm single sheath insulation as
shown below, so that only 5mm bare copper
is protruding.
Note: Total outer diameter of each wire
should not exceed 3.00mm. Large diameter
STEP 3. Lift the terminal latch clips and
FULLY insert the prepared active wires into
the terminal block on the mounting bracket,
and latch down the clip to lock the wires.
Note: About 7-8mm of the plastic tube (or
similar) insulation will be inserted as well. The
total diameter of each wire should not exceed
3mm as mentioned in Step 2.
Note: Ensure correct polarities, and ensure
terminal block.
Fully nsert the
wires (including the
double insulated
heat tube section)
Approx 15mm
total.
Insert plastic sleeves over the
prepared active wires.
STEP 2. Prepare the Heat shrink tubes with the same length and place over the 20-30mm single sheath insulaon as shown below, so that only the 5mm
bare copper scking out. Note: Heat shrink tube outer diameter to be 2.5mm– 3.00mm only. Large diameter will not finto the terminal block. See Step
3
Insert heat shrink sleeves
over the prepare acve wires
STEP 2. Prepare the Heat shrink tubes with the same length and place over the 20-30mm single sheath insulaon as shown below, so that only the 5mm
bare copper scking out. Note: Heat shrink tube outer diameter to be 2.5mm – 3.00mm only. Large diameter will not finto the terminal block
3
Insert heat shrink sleeves
over the prepare acve wires
STEP 4. Apply 3-4 layers of electrical tape
overlapping the heat shrink insulation and
the double insulation of the supply cable
as shown.
Apply 3-4 layers
of electrical tape
making sure to
overlap the area
where the wires
branch from the
double insulation of
the supply cable.
30mm single sheath insulaon as shown below, so that only the 5mm
3.00mm only. Large diameter will not finto the terminal block . See Step
Insert heat shrink sleeves
over the prepare acve wires
•
0>/< -97:6/>381 >2/ /6/-><3-+6 -988/->398 +> >2/ 79?8>381 ,<+-5/> >/<738+6 ,69-5 -988/-> >2/ -/36381
0+8A3<381,C>2/;?3-5-988/->9< :6?1
+ 9< 0+8 79./6=FA3>29?>6312>G :6?1 H "&%H+8. H!%!#G38>9</79>/-98><96,9B 31
, 9< 0+8 79./6=FA3>26312>G :6?1H "&%H H!%!#I +8.H 38>9</79>/-98><96 ,9B31
•
$63./ >2/ -+89:C?:A+<.=38>9:9=3>3989@/< >2/79?8>381,<+-5/> >2/8>?<8-9?8>/<-69-5A3=/ >9 >A3=>
69-538>9:9=3>3988=?</+66 %+,=98>2/79?8>,<+-5/> +</69-+>/.-9<</->6C 38>9 >2/=69>=98>2/
-+89:C +89:C=29?6.,/=3>>381+::<9B 77900>2/-/36381
•8=?</+66A3</=+</>?-5/.8/+>6C38>9-+89:C>+5381-+</89>>9-+?=/.+7+1/
'%
4'01),!(+,-6
),1
7
WARNING: FOR YOUR SAFETY ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY
A LICENSED ELECTRICIAN IN ACCORDANCE WITH AS/NZS 3000 WIRING RULES.
• Connect “LIVE” supply to the “L” of the terminal block on the mounting bracket. See Fig 6.
• Connect “NEUTRAL” supply wire to the “N” terminal block on the mounting bracket.
See Fig 6.
• Slide the canopy upwards into position over the
mounting bracket then turn counter clockwise to
twist lock into position. Ensure all 4 tabs on the
mount bracket are located correctly into the slots
on the canopy. Canopy should be sitting approx.
-3mm off the ceiling.
• Ensure all wires are tucked neatly
into canopy taking care not
to cause damage.
Please note:
This is only
applicable to
models with
LED light.
Fig. 7.1. Fig. 7.2.
•
0>/<-97:6/>381>2//6/-><3-+6 -988/->398+>>2/79?8>381,<+-5/>>/<738+6 ,69-5-988/->>2/-/36381
0+8A3<381,C>2/;?3-5-988/->9< :6?1
+ 9< 0+8 79./6=FA3>29?>6312>G :6?1 H "&%H+8. H!%!#G38>9</79>/-98><96,9B 31
, 9< 0+8 79./6=FA3>26312>G :6?1H "&%H H!%!#I +8.H 38>9</79>/-98><96 ,9B31
•
$63./ >2/ -+89:C?:A+<.=38>9:9=3>3989@/< >2/79?8>381,<+-5/> >2/8>?<8-9?8>/<-69-5A3=/ >9 >A3=>
69-538>9:9=3>3988=?</+66 %+,=98>2/79?8>,<+-5/> +</69-+>/.-9<</->6C 38>9 >2/=69>=98>2/
-+89:C +89:C=29?6.,/=3>>381+::<9B 77900>2/-/36381
•8=?</+66A3</=+</>?-5/.8/+>6C38>9-+89:C>+5381-+</89>>9-+?=/.+7+1/
'%
4'01),!(+,-6
),1
•
0>/<-97:6/>381>2//6/-><3-+6 -988/->398+>>2/79?8>381,<+-5/>>/<738+6 ,69-5-988/->>2/-/36381
0+8A3<381,C>2/;?3-5-988/->9< :6?1
+ 9< 0+8 79./6=FA3>29?>6312>G :6?1 H "&%H+8. H!%!#G38>9</79>/-98><96,9B 31
, 9< 0+8 79./6=FA3>26312>G :6?1H "&%H H!%!#I +8.H 38>9</79>/-98><96 ,9B31
•
$63./ >2/ -+89:C?:A+<.=38>9:9=3>3989@/< >2/79?8>381,<+-5/> >2/8>?<8-9?8>/<-69-5A3=/ >9 >A3=>
69-538>9:9=3>3988=?</+66 %+,=98>2/79?8>,<+-5/> +</69-+>/.-9<</->6C 38>9 >2/=69>=98>2/
-+89:C +89:C=29?6.,/=3>>381+::<9B 77900>2/-/36381
•8=?</+66A3</=+</>?-5/.8/+>6C38>9-+89:C>+5381-+</89>>9-+?=/.+7+1/
'%
4'01),!(+,-6
),1
Fig. 8
Twist Counter
Clockwise to lock Twist
Clockwise
to unlock
Twistlock Canopy
8
1.Turn wall switch to ‘ON’ Ian
is now in standby mode.
A ‘beep’ will be heard.
If your fan has a light, the light
will illuminate in default setting
of 100% brightness in (NW)
Qatural
white light.
FAN Fan ‘ON’ and ‘OFF’
F/R Forward - downdraft for cooling (summer mode)
Reverse - updraft for heat circulation (winter mode)
Increases fan speed until Max (speed 5)
Decreases fan speed until Min (speed 1)
TIMER Run on Timer with 12 setting options (1hr to 12hrs)
MODE ECO, SLEEP and NORMAL
ECO MODE VWSUHVV)DQZLOORSHUDWHDWSHDNHQHUJ\HIĺFLHQF\
level, usually somewhere between speeds 1 and 2
SLEEP MODE 2nd press - Fan will reduce by 1 speed every 30mins
XQWLOVSHHGVHOHFWSUHIHUUHGVWDUWLQJVSHHGOHYHOĺUVW
NORMAL
3rd Press - cancels mode and returns to normal function
Please note:
‘SLEEP’ or ‘ECO’ modes.
FAN Fan ‘ON’ and ‘OFF’
Increases fan speed until Max (speed 5)
Decreases fan speed until Min (speed 1)
LIGHT Switches light ‘ON’ and ‘OFF’
Scrolls through colours: WW - NW - CW
Increases light brightness
Decreases light brightness
TIMER Run on Timer with 12 setting options (1hr to 12hrs)
MODE
F/R ECO, SLEEP, NORMAL and Forward/Reverse
ECO MODE VWSUHVV)DQZLOORSHUDWHDWSHDNHQHUJ\HIĺFLHQF\
level, usually somewhere between speeds 1 and 2
SLEEP MODE 2nd press - Fan will reduce by 1 speed every 30mins
XQWLOVSHHGVHOHFWSUHIHUUHGVWDUWLQJVSHHGOHYHOĺUVW
NORMAL
3rd Press - cancels mode and returns to normal function
Please note:
‘SLEEP’ or ‘ECO’ modes.
F/R
Press and Hold for minimum 3 secs to change between Forward and
reverse. ‘F’ and ‘R’ will be visible on display screen
Forward - downdraft for cooling (summer mode)
Reverse - updraft for heat circulation (winter mode)
Fan Models Without Light
Fan Models With Light
+
+
+
+ and
+ and
will not operate during
will not operate during
-
-
-
-
-
Note: Light will reactivate
at previous brightness and
colour (CCT) settings when
using handset only. Once wall
(isolation) switch has been
turned ‘OFF’ Light will default
back to 100% brightness
(NW) Natural white light.
•&#(6$+ #*,1#!,+1/,)!,*#0-/#-'/#"11&#$!1,/6+"'0/#"61,20#
'/'+%4')),+)6 #/#.2'/#"'+0'121',+0*#+1',+#" #),4
•/#*,1#!,+1/,)!,+0'010,$14,-/10
+"0#11/+0*'11#/!,+1/,))#/
,. $+*,"#)/63'0&)'%&07
!-9: !-$9: 12!021 .-1/%%$
5)2#(%1 +)'(2 9: 2(%- 1#0.++1 2(0.3'( #.+.301
12!021.-
#0.++12(0.3'(#.+.301 12!021 .-
-#0%!1%1 &!-1/%%$ 3-2)+ !6 1/%%$
%$3#%1&!- 1/%%$ 3-2)+ )-1/%%$
-#0%!1%1 +)'(2 "0)'(2-%11
%$3#%1 +)'(2 "0)'(2-%11
3-.-),%0 5)2(1%22)-'./2).-1 (0 2.(01
0%11%12.15)2#( !-$
!-$
/0%11 !-5)++ ./%0!2%!2 /%!*%-%0'7%&&)#)%-#7
+%4%+ 313!++71.,%5(%0%"%25%%-1/%%$1!-$
/0%11 !-5)++ 0%$3#%"71/%%$%4%07,)-
3-2)+ 1/%%$
/0%11 8!-#%+1 .$% !-$ 0%230-1 2. -.0,!+
&3-#2).- +%!1% -.2% !-$ 5)++ -.2
./%0!2%$30)-'9: .0 9: ,.$%1
.-'/0%11%1"71%#.-$12.15)2#(2.3,,%0 !-$
)-2%0 ,.$%1
.05!0$.5-$0!&2 &.0 #..+)-' 13,,%0 ,.$%
%4%01%/$0!&2 &.0 (%!2 #)0#3+!2).-5)-2%0 ,.$%
• A remote control consists of two parts.
1. Handset (transmitter) controller.
2. 5HFHLYHUUHFHLYHUVPHVVDJHV IURPWKHKDQGVHWDQGLVORFDWHGLQXSSHU
FDQRS\RIWKHIDQ
• The Skyfan DC remote control comes pre-paired at the factory and is ready
to use.
Pairing will only be required in situations mentioned below.
1. Using 1 remote handset to control 2 or more Skyfan DC Ceiling fans
• Choose the fan you wish to pair with your handset.
• Turn isolation switch ‘ON’ and within 20 seconds press and hold on the
remote for 3 seconds. The fan will emit a ‘beep beep’ sound to indicate
the pairing process is activated.
• Press and change the speed of the ceiling fan via the remote to check the
operation and successful pairing.
2. Loss of function or control between hand piece and receiver
• Try the re-pairing process as outlined above (point 1). If the problem persists,
call Ventair technical support on 1300 665 926.
3. Replacing an old or damaged handset
• If you are replacing a handset only (not the receiver), the repairing process
(point 1) will need to be performed before operation of the fan is possible.
9
Handset
5HFHLYHU
10
CARE AND CLEANING:
NOTE: Always turn OFF the power at the mains switch before performing any maintenance
or attempting to clean your fan.
• Every 6 months, periodic cleaning of your ceiling fan is the only maintenance
required. Use a soft brush or lint free damp cloth to avoid scratching or marking the
surface. Please turn off electricity power when you do so.
• Do not soak or immerse your ceiling fan in the water or other liquids. It could
damage the motor or the blades and create the possibility of an electrical shock.
• Ensure that the fan does not come in contact with any organic solvents or cleaners.
• To clean the fan blade, wipe with only a damp clean cloth with NO organic solvents
or cleaners.
• The motor has a permanently lubricated ball bearing so there is no need to oil.
Fan Operation:
6N\IDQ'&KDVEHHQGHVLJQHGWRRSWLPL]HDLUĻRZZLWKPLQLPDODPRXQWRIHQHUJ\XVDJH
A ceiling fan rotates much more slowly than traditional style wall, pedestal or desk fans;
FHLOLQJIDQVFRROSHRSOHHIIHFWLYHO\E\LQWURGXFLQJVORZPRYHPHQWZLWKKLJKDLUĻRZLQWR
the otherwise still, hot air of a room, creating a natural evaporative cooling effect. Fans never
DFWXDOO\FRRODLUOLNHDLUFRQGLWLRQLQJHTXLSPHQWEXWXVHVLJQLĺFDQWO\OHVVSRZHU
Normal Wear and Tear
Over time, moving parts may become slightly loose or worn creating small increases in
noise or movement. Fan operation may also be affected by accidental contact by persons
or foreign objects. These conditions are not covered under warranty, but a little care and
maintenance can reduce or prevent these problems from arising
Night Noise
All electric motors, including fan motors make some noise however, the Skyfan DC fan motor
is not susceptible to the noise problems that are commonly experienced with typical Kigher
wattage, heavier AC type ceiling fan motors. The Skyfan DC Range are one of the quietest
fans available and are ideal for all areas of the home especially bedrooms where noise is a
crucial consideration.
11
Ceiling Fan
Model Rated Voltage
Rated
Power
(Motor)
Rated Power (Lamp) Fan Weight
(Kg)
SKYWH& 220-240 VAC 3W N/A
SKYWH&-L 220-240 VAC 3W 20W, LED, 3000K, 4000K, 5000K
12
• If you consider there are faults relating to the installation, contact your installer to
rectify.
• If you consider there is a manufacturer defect to the fan motor, contact the
warranty service line on 1300 665 926, or submit a warranty claim at
www.ventair. com.au/warranty
You will need to provide the following information:
• The name and contact details of the licensed electrician installer
• The brand, model number and serial number (on motor housing)
• The date and place of purchase of the unit.
• The owners name, address and telephone contact numbers.
• The nature of the fault.
The cost of a service person will only be paid for manufacturer defect.
Once a service person has been out, if any fault is found to be an installation or user
fault, the charges will be applied to the fan owner.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Skyfan SKY1303WHC2 is an intelligent energy-saving DC ceiling fan that combines stylish design with advanced technology to provide optimal comfort and efficiency in your home. With its powerful DC motor, it delivers whisper-quiet operation and significant energy savings compared to traditional AC fans.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Bosch PIZ975N14E/01 User manual
-
Bosch PIV651N14M/20 Owner's manual
-
Bosch HBX33R50 User manual
-
Bosch HBX53R50/02 Owner's manual
-
BALAY 3HF518B User manual
-
-
-
Dometic Refrigeration Mini Fridges Installation guide
-
-
Bosch HEN300540/02 Owner's manual