2. Computers & electronics
  3. TVs & monitors
  4. Wall & ceiling mounts accessories
  5. Toro
  6. Heavy Duty Spring Kit, TimeCutter MyRide Riding Mower

Toro Heavy Duty Spring Kit, TimeCutter MyRide Riding Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Heavy Duty Spring Kit, TimeCutter MyRide Riding Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3436-773RevA
HeavyDutySpringKit
TimeCutter
®
MyRideRidingMower
ModelNo.140-2051
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Nopartsrequired
–
Preparethemachine.
Nopartsrequired
–
Removetheexistingfrontspring.
Spring
1Installthenewheavy-dutyspring.
Springspacer
2
Setscrew
2
Spring-lifttube
1
Installthespringspacers.
PreparingtheMachine
1.Parkthemachineonalevelsurface.
2.Disengagetheblade-controlswitch.
3.Movethemotion-controlleversoutwardtothe
NEUTRAL-LOCKposition.
4.Shutofftheengineandremovethekey.
©2019—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3436-773*A
RemovingtheExisting
FrontSpring
1.Placea38x89mm(2x4inch)boardunderthe
footresttoblockthefrontoftheplatform.
2.Removethe2shoulderboltsand2locknuts(3/8
inch)securingtheexistingfrontspring(Figure
1).
Retainthe2shoulderboltsand2locknuts(3/8
inch).
3.Removetheexistingfrontspring(Figure1).
g308390
Figure1
Topofthefrontspringshown
1.Frontspring
3.Locknut(3/8inch)
2.Shoulderbolt
InstallingtheNew
Heavy-DutySpring
Installthenewspringusingthepreviouslyremoved
2shoulderboltsand2locknuts(3/8inch)asshown
inFigure1.
2
InstallingtheSpring
Spacers
1.Raisetheseat.
2.Placethespring-lifttubeontotheendofthe
torsionspring(Figure2).
Note:Ensurethatthespring-lifttubeissecurely
seatedontheendofthetorsionspring.
g309475
Figure2
1.Spring-lifttube
2.Torsionspring
3.Slidethespringspacerontotheswing-armpost
(Figure3).
4.Useonehandtolifttheendofthetorsionspring
offtheswing-armpostandslidethespacer
betweenthetorsionspringandswing-armpost
(Figure3).
g309474
Figure3
1.Springspacer
3.Torsionspring
2.Swing-armpost4.Spring-lifttube
5.Securethespringspacertotheswing-armpost
usingthesetscrew(Figure4).
g309473
Figure4
1.Swing-armpost3.Setscrew
2.Springspacer
6.Repeatthisprocedureontheotherside.
7.Lowertheseat.
3
/