CD102

Personal CD Player

Owner’s Manual

CD102 Personal CD Player Owner’s Manual

1

Thank you for purchasing this Califone CD Player, which we hope will support your teaching eorts in ELD, ELL, ESL and other

language arts applications. I encourage you to go online to califone.com in order to learn more about our other product lines

which help student understanding and achievements.

While online, make sure you register your Player for its one year warranty.

immediately. Please keep the packing material for further use.

CD102 Personal CD Player Owner’s Manual

Location of Controls

1. MODE Button

2. Pause Button

3. Skip/Search button (PREV)

4. Stop Button

5. Play/Pause Button

6. ESP Button (Anti-Shock Protection)

7. Program Button

8. Skip/Search Button (NEXT)

15. Headphone Socket

16. Bass Boost Switch

2

Power Supply

1. Battery

Open the battery cover, insert the batteries as indicated in

diagram 1 and then close the battery cover.

Caution:

If you are not going to use the CD Player for an

extended period of time, it’s recommended the batteries be

removed to prevent any possible corrosion within the unit.

3. Battery Power/ Volume Indication

When the batteries become weak, the LCD display will

indicate the “low battery” symbol. Replace the batteries to

restore correct operation.

4. The CD Player Output Connection

The CD Player output can be connected to headphones (14),

external amplier, and jackbox for multiple listeners (15).

3

4

Operation

Play Mode

Press the [OPEN] button to open the cover and then

insert the CD.

Ensure the label side is facing up. Place the center of the CD

onto the spindle and gently press down to secure it in place.

Close the cover.

Plug the stereo headphone into the phone jack.

time will resume playing.

Stop Mode and Power O

Press the STOP button once to stop playing the CD. After

the STOP button is pressed, the LCD display will indicate the

total tracks and total playing time.

To switch your player o from the STOP mode, press the

STOP button. The LCD display will become blank and

the player will turn o.

Adjusting Volume

Adjust the volume knob to the desired level.

Program Mode

Programmable Play

The disc can be played in a programmed order (maximum 20 tracks

can be played) to suit personal preferences and learning styles.

(1) While a CD is playing, pressing the PROGRAM button will prompt

the LCD display to indicate “PROG” and the track number ”01”.

(2) Press the FF/NEXT or REV/PREV button to select the rst track

to be programmed.

number will display “00” and the program number will change to

all programmed tracks have been played, the player will automati-

cally stop. The programmed tracks will be stored in memory until

the CD door is opened or the power is shut o. To play the same

programmed tracks again, press the PLAY button.

5

6

Other Play Methods

Skipping or Scanning Tracks

Pressing the FF/NEXT button while a CD is playing will skip to the

next track. Pressing the REW/PREV button will skip the player back-

pressed twice. Press and hold the FF/NEXT button to fast forward

through the current playing song. Press and hold the REW/PREV

button to Rewind through the current playing song.

While in STOP, PLAY or PAUSE modes, press the MODE button. The

Press the MODE button twice. The LCD will indicate 1 ALL and

the player will repeat playing the entire disc. Pressing the MODE

button three times will return to the normal playing condition.

Intro Mode

The Intro Mode describes when the player will play the rst

automatically turn o. Press the MODE button three times and

the LCD display will indicate “INTRO.” Then press the PLAY button

and the “INTRO” mode will begin.

Press the MODE button four times. The LCD will indicate “SHUFF.”

Then press the PLAY button to begin. The player will play all tracks

Automatic Start-Up/Shut O

Power On

While in STOP mode, press the PLAY button. The Player will

automatically start up and the display will indicate the start up

Auto Shut O

The Player will shut o automatically if no operation is selected

within a one minute period after turning the CD Player on or after

7

8

Shock Protection (ESP/Anti-Shock)

Vibration Resistant

By reading audio date and storing it in the “ANTI-SHOCK” memory,

vibration resistance is achieved. When the player is bumped or

ory. The CD player also contains a vibration resistant mechanism to

prevent the skipping noise caused by the change of playing speed

when the player is “rocked”.

Auto ESP

automatically be enabled. The in the display will turn into

protecting it from an accidental pressing of another button

while in use.