aspenhome I07-284-WBR Assembly Instructions

aspenhome
Brand
aspenhome
Model
I07-284-WBR
Type
Assembly Instructions

This manual is also suitable for

aspenhome I07-284-WBR is an 86" Console with adjustable wood shelves and levelers on bun feet, support legs, and back support. It also has a TV mount that can be attached to the TV frame. You can adjust the shelf location if you prefer by removing the screws and moving the shelf brackets to the desired location, then securing the brackets to the shelf with screws.

Use the leveler when necessary. This console is for indoor use only.

aspenhome I07-284-WBR is an 86" Console with adjustable wood shelves and levelers on bun feet, support legs, and back support. It also has a TV mount that can be attached to the TV frame. You can adjust the shelf location if you prefer by removing the screws and moving the shelf brackets to the desired location, then securing the brackets to the shelf with screws.

Use the leveler when necessary. This console is for indoor use only.

09-06-2017
Page 1/1
ITEM NO: I07-284-WBR/PEP/BLK 86" Console
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
COMPONENTS LIST:
No.
Description
Sketch
Quantity
1 Bun Foot 6 PCS
2
Support Leg
2 PCS
aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference.
FOR INDOOR USE ONLY
FUNCTIONALITY INSTRUCTION
Case Back
Bun Foot
Support leg
leveler
STEP 1: Put the console upside down on a soft
surface, Attach the bun feet and support legs to the
case. Turn the console to the upright position.
If you prefer to adjust the shelf
location, remove the screws and
move shelf brackets to the
desired location. Then secure the
brackets to shelf with screws.
Leveler on Bun feet, Support
legs and Back Support
Adjust the leveler
when necessary
Adjustable wood shelves
06-21-2018
Page 1/2
ITEM NO: I07-284H-WBR/PEP/BLK 86" Hutch
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference.
FOR INDOOR USE ONLY
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
HARDWARE LIST:
No.
Description
Sketch
Quantity
A
Bolt Ø1/4"*1-1/2" 28 PCS
B
Lock Washer Ø1/4"
28 PCS
C Flat Washer Ø1/4" *3/4" 28 PCS
D
Allen Wrench 4mm
1 PC
E Wood Screw
6 PCS
COMPONENTS LIST:
No.
Description
Sketch
Quantity
1
Top assembly
1 PC
2
Left side assembly
1 PC
3
Right side assembly
1 PC
4
Top back panel
1 PC
5
Middle back panel
1 PC
6
Bottom back panel
1 PC
7 TV Mount 1 Set
FUNCTIONALITY INSTRUCTION
I07-284H
I07-284
Adjust the leveler
when necessary
If you prefer to adjust the shelf
location, remove the screws and
move shelf brackets to the
desired location. Then secure the
brackets to shelf with screws.
Adjustable wood shelves
TV Mount
Assembly instructions for the TV
mount are in the TV mount package.
Follow these instructions when
attaching TV mount and TV to the
TV frame.
ITEM NO: I07-284H-WBR/PEP/BLK 86" Hutch
aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
06-21-2018
Page 2/2
STEP 1: Attach the top back panel and
bottom back panel to the middle back
panel by using 8 bolts (A), lock
washers (B) and flat washers (C).
A
B
C
D
A
B
C
D
STEP 2: Attach the back assembly to the
left side assembly and right side assembly
by using 8 bolts (A), lock washers (B) and
flat washers (C). Do not tighten the bolts
completely.
STEP 3: Attach the top assembly to
the left side assembly, right side
assembly and back assembly by
using 12 bolts (A), lock washers (B)
and flat washers (C). Completely
tighten all bolts.
A
B
C
D
STEP 4: Swing large metal plate
on the back of hutch into an ideal
location as shown to the right.
Then re-secure the large metal
plate with screw (E) to hutch and
console.
Bottom back panel
Middle back panel
Top back panel
Top assembly
Left side
assembly
Right side
assembly
I07-284H
I07-284
Large
metal
plate
E
  • Page 1 1
  • Page 2 2
  • Page 3 3

aspenhome I07-284-WBR Assembly Instructions

aspenhome
Brand
aspenhome
Model
I07-284-WBR
Type
Assembly Instructions
This manual is also suitable for

aspenhome I07-284-WBR is an 86" Console with adjustable wood shelves and levelers on bun feet, support legs, and back support. It also has a TV mount that can be attached to the TV frame. You can adjust the shelf location if you prefer by removing the screws and moving the shelf brackets to the desired location, then securing the brackets to the shelf with screws.

Use the leveler when necessary. This console is for indoor use only.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents