Badger Basket 00751 User manual

Brand: Badger Basket

Model: 00751

Category: Baby furniture

Type: User manual

3.0/1108/TG

MODEL NUMBERS:

T-SERIES PORTABLE

BABY BASSINET ‘N CRADLE

WITH TOYBOX BASE

Assembly

Instructions.

Adult Assembly

Required.

Save these

instructions for

future use.

Visit us online at www.badgerbasket.com

Toll-Free Customer Service: 1-800-236-1310 (Monday through Thursday 7:30 AM to 4:30 PM CST)

Web: http://www.badgerbasket.com/parts • E-mail: [email protected]

Mail: PO Box 227, Edgar, WI 54426-0227 • Phone: 715-352-2311 • Fax: 715-352-3163

Page 1 of 6

0850T White Batiste 0860T Sage Waffle Pleated

00750 Pink Waffle 0861T Ecru Waffle Pleated

00751 Blue Waffle 0854T Moon/Star

00752 Sage Waffle 0852T Sage Gingham

3.0/1108/TG

BEFORE YOU BEGIN ASSEMBLY:

Check all parts and hardware. If anything is missing

or not satisfactory, please DO NOT call the store

where purchased or return the product to them.

Contact Badger Basket for assistance.

Most problems are resolved without you needing to

leave home. When contacting us, please have this

instruction manual, your product model number, and

your product version code ready. For fastest service,

go to http://www.badgerbasket.com/parts

Your Product Version Code is: 3.0/1108/TG

Page 2 of 6

• SUFFOCATION HAZARD - Infants can suffocate:

» in gaps between an extra pad and the side of the bassinet,

» on soft bedding.

NEVER add a mattress, pillow, comforter, or padding. Use ONLY the pad

and/or bedding provided by the manufacturer. If a sheet is used with the pad, use only the one provided with the

bassinet or one that is from Badger Basket Company or one that is specifically designed to fit the dimension of the

the mattress provided.

• TO REDUCE THE RISK OF SIDS: pediatricians recommend that healthy infants be placed on their backs to

sleep, unless otherwise advised by your physician.

• DO NOT move or carry the bassinet with your baby inside of it.

• DO NOT allow other children or pets to climb into or onto the bassinet when your infant is inside.

• DO NOT attach or place toys with strings in or around the basket. Strings can cause strangulation or choking.

• Keep bassinet away from stoves, heaters, camp fires/flames, fireplaces, stairs, open windows, window blinds,

running or standing water, and any other hazard which could cause injury to your baby.

• NEVER use plastic bags inside the basket such as to cover the mattress.

• Bassinet should always be placed on a firm, flat surface. It should never be placed near stairs or on tables or

elevated surfaces.

• READ ALL INSTRUCTIONS before use of this product. Keep instructions for future use. Product and/or

hardware may include small parts or screws with sharp points.

• Choking Hazard! Keep unassembled parts out of the reach of small children. Use only the parts and hardware

provided by Badger Basket.

• Do not use the bassinet if it is damaged or broken.

• Periodically check to make sure all the bolts and screws remain tight.

FALL HAZARD: To help prevent falls, please note this bassinet is a safe place for your

newborn to sleep until Baby is 4 months old, 20 lbs. (9.09 kg), OR when Baby can push

up, roll over, or crawl - whichever limit comes first.

WARNING - FAILURE TO FOLLOW THESE WARNINGS

AND THE INSTRUCTIONS COULD RESULT IN SERIOUS

INJURY OR DEATH:

3.0/1108/TG

TOOLS NEEDED: Phillips Screwdriver*

* Power screwdriver is helpful but be careful not to damage the product

Page 3 of 6

PARTS INCLUDED (pictures not to scale):

(A) 2 - End Panels

(note inside and outside faces)

(B) 4 - Rails

(D) 2 - Nylon Snap Straps

(E) 2 - Dowels

(F) 1 - Mesh Basket

(G) 1 - Set of Caster Wheels, includes:

4 Wheels, 4 Bolts, 4 Knobs

(H) 1 - Bassinet Body (not shown)

(I) 1 - Bedding Set (not shown), includes:

1 Liner/Skirt, 1 Sheet, 1 Hood Cover

(J) 1 - Mattress Pad (not shown)

(K) Hood Hoop Frame (2 pieces, not shown)

(L) 2 - Side Panels, 1 - Bottom Panel

(for Toy Box Base)

PARTS & HARDWARE:

USE AND CARE INSTRUCTIONS:

Wipe the wood/MDF parts clean with a damp cloth and mild soap as needed.

Spot clean basket as needed. Bedding Set can be machine washed on cold,

gentle cycle; tumble dry low or no heat.

3.0/1108/TG

STEP 1: See PICTURE 1. Take ONE END PANEL (A)

and attach the FOUR RAILS (B) using FOUR BOLTS

(C).

Attach the rails to the INSIDE FACE of the END

PANEL. The inside face has countersunk areas for the

rails and slots that you will use later for the mesh basket.

Position the bottom rails with the grooves facing

up; and position the top rails with the grooves facing

down.

Slip the TWO NYLON SNAP STRAPS (D) over

the TOP RAILS (B). Position them so that they are ready

to snap to the snaps on the bassinet body (H).

STEP 2: See PICTURE 2. Attach the second END

PANEL (A) to the FOUR RAILS (B) using FOUR BOLTS

(C).

STEP 3: See PICTURES 3A and 3B. Turn the bassinet

stand upside down.

Insert the TWO DOWELS (E) through the edge

pockets of the MESH BASKET (F). Insert the ends of

the ONE DOWEL (E) into the SLOTS cut into the inside

faces of the END PANELS (A). Stretch the mesh basket

over the rails and around to the other side, and insert the

second wood dowel into the dowel slots. Adjust the mesh

basket to remove wrinkles.

Attach the FOUR CASTER WHEELS (G) to the

corners of the end panels using one BOLT and one KNOB

for each WHEEL. The knobs go on the inside.

Page 4 of 6

PICTURE 1

PICTURE 2

PICTURE 3A

STEP 4: See PICTURES 4A and 4B. Turn the bassinet

stand over.

Fit the slots on the BASSINET BODY (H) over the

raised edge pieces on the top of the END PANELS (A).

See PICTURE 4A.

Next, snap the NYLON SNAP STRAPS (D) onto

the snaps on the bottom edge of the BASSINET BODY

(H). See PICTURE 4B.

3.0/1108/TG

STEP 5: Unpack the

BEDDING SET (I). You

may launder the set be-

fore use if you wish,

and/or iron, press, or

steam it to remove

wrinkles. Machine wash

cold, gentle cycle only;

air dry or tumble dry

low or no heat. Iron on

lowest setting for poly/

cotton.

Locate the buttonholes

on the FABRIC LINER

and slip them over the

spools on the BASSI-

NET BODY (H).

Smooth the liner around

the sides and bottom in-

side the bassinet, and adjust it around the outside of the bassinet.

Put the SHEET onto the MATTRESS PAD (J) and place

the mattress pad into the bassinet.

Snap together the HOOD HOOP FRAME (K) as shown

in PICTURE 5. Stretch the fabric HOOD over the FRAME and

slip the elastic loops over the ends of the frame to hold the hood

in place. Snap the FRAME (K) onto the spools on the BASSI-

NET BODY (H).

The bassinet is now ready for your baby! See PICTURE 6.

Page 5 of 6

PICTURE 3B

PICTURE 4A

“Puzzle Piece” Fit

PICTURE 4B

Snap Straps

Raised Lip

towards front

PICTURE 5

PICTURE 6

NOTE: Your bassinet

bedding may vary

from shown

3.0/1108/TGPage 6 of 6

PICTURE 7

To use the bassinet as a Rocking Cradle,

loosen the caster knobs, rotate the casters

into the up position, and retighten the knobs.

See PICTURE 7.

STEP A: Remove the bedding, bassinet body,

hood, wooden dowels, and mesh basket, and

set them aside.

STEP B: Unscrew and remove all four of the

bolts holding the TOP RAILS and set aside

the screws, rails, and nylon snap straps.

STEP C: Insert the two larger SIDE PAN-

ELS (L) into the grooves on the bottom rails

with the white sides facing out.

STEP D: Re-attach the TOP RAILS using

the four screws making sure the side panels

are seated into the grooves.

STEP E: Place the bottom panel (L) inside

the stand resting on the bottom rails with the

white side facing up.

STEP F: Store the bassinet body, bedding

set, hood hoop frame, wooden dowels, mesh

basket, mattress pad, and nylon snap straps

for future use.

PICTURE 8

TO CONVERT THE STAND TO A TOY BOX

PICTURE 8

Badger Basket 00751 User manual

Brand: Badger Basket

Model: 00751

Category: Baby furniture

Type: User manual

Download PDF

report

Badger Basket 00751 User manual

Badger Basket 00751 User manual

Related papers

Other documents