BD Alaris™ Syringe module-compatible syringes and flow rate ranges Quick start guide

Alaris™ System Syringe Module-

Compatibility Syringes and Flow Rate

Ranges

Medications delivered on Alaris System’s Syringe module must be prepared in a syringe that accommodates the desired flow rate. The

following chart shows the flow rate ranges for each syringe size. In addition, the compatible syringe sizes with reorder numbers are

displayed*.

Alaris System Infusion pump system is manufactured by CareFusion Corporation USA.

Please refer to the Infusion Pump Directions For Use manual.

*Correct at time of printing.

#Please note the IVAC syringe code change has been fully evaluated and there is no change in performance specifications

CareFusion is a wholly-owned subsidiary of BD.

bd.com

Syringe Size

Manufacturer and Model Numbers

BD Covidien IVAC Flow Rate Range

1 mL 309628 N/A N/A 0.01 to 3 mL/hr

6 mL N/A

Soft pack: 1180600777 NZ only

Rigid Pack: 8881516937 (ANZ)

N/A 0.1 to 150 mL/hr

10 mL 300912 N/A N/A 0.1 to 250 mL/hr

20 mL 302830 N/A N/A 0.1 to 500 mL/hr

30 mL 302832 N/A N/A 0.1 to 650 mL/hr

50 mL N/A N/A 30602N/30602U 0.1 to 999 mL/hr

60 mL 309653

Soft pack: 1186000777 NZ only

Rigid Pack: 8881560125 (ANZ)

N/A 0.1 to 999 mL/hr

CareFusion Australia 316 Pty Ltd, 3/167 Pacific Highway, Seven Hills NSW 2147.

Ph: 1800 833 372

CareFusion New Zealand 313 Ltd, 14B George Bourke Drive, Mt Wellington Auckland 1060.

Ph: 0508 422 734