Building a Castle
Turret Wall: A
STEP
1
Turret Wall: B
STEP
2
Turret Wall: C
STEP
4
Turret Wall: D
STEP
5
STEP
3
Double Plane Matrix
Using 3-way and
2-way connectors
Sold Matrix
Using 2-way and
4-way connectors
(64) 90°(406) 2-way
Coins needed to build your castle:
(342) pennies (44) nickels
Coinstruction connectors needed to build your castle:
Turret Walls: A & B
A
B
STEP
6
Top View
40 pennies
4
Turret Top: A
STEP
8
16 pennies
16
32
20
48
(48) 3-way (84) 4-way
40 pennies
4
20
48
40 pennies
20
52
40 pennies
20
52
Turret Walls: C & D
C
D
A
B
STEP
7
Turret Walls Assembly: A, B, C, & D
D
A
B
C
Turret Assembly
STEP
9
16
32 nickels16
Single Plane Matrix
Using 2-way connectors
Cube
Using 2-way and
90° connectors
Hub
Using 2-way connectors
Hub
Using 2-way connectors,
attach coin-to-connector
and connector-to-connector.
Extra Strength
By doubling connectors you can
strengthen any connection.
(This shows two 4-way connectors.)
Basic and Starter Shapes
Use these illustrations to build basic and “starter” shapes. Once
you know how to build these basic shapes, you will be able to
build anything your imagination allows! Remember, not all kits
have every kind of connector. Check the description to the right
to see which connectors are included in this kit.
STEP
10
Back Wall Assembly
STEP
12
Front Gate and Drawbridge
STEP
11
Side Wall Assembly
Turret
Top
Turret
Walls
Back Wall
27 pennies
51
36 pennies
60
Wall
Back Wall Base
26 pennies
16
26
Front Gate
Side Walls
24 pennies
8
Drawbridge
4
8
12 nickels
2
17
12 pennies
Front Gate
Top B
12
12
9 pennies
Front Gate
Top A
Wall Base
32 pennies
16
Turret Top: B
Place these connectors
high on the nickels.
Tip!
Place these
connectors
high on
the nickels.
Tip!
4X
4X
4X
4X
4X
2X
4X
4X
4X
4X
4X
2
