2. Industrial & lab equipment
  3. Personal safety & protection
  4. Fire protection
  5. Hochiki
  6. FNV-DP High Rise Voice Evacuation System

Hochiki FNV-DP High Rise Voice Evacuation System User manual

  • Hello! I've reviewed the product details for the Hochiki FNV series of voice evacuation systems. This document outlines the features of the FNV-DP distributed panel and its various configurations, including dual and single channel amplifiers. I'm ready to answer any questions you may have about the system's capabilities and its components as described in this document.
  • What is the maximum message capacity?
    What type of fire alarm panels does it work with?
    How many channels of audio does the system provide?
    How many Distributed Panels can be configured in the system?
Features:
Description:
True Multiplex 6 Channel Distributed Audio
Integrated Fire Phone, Area of Rescue
and Fan & Damper Control capability
Modular System - components added as needed
Integrated 2 Channel Digital Message Repeater
Live Microphone Page to any zone
Fast RS-485 Communication Protocol
Easy Installation and Operation
Natural Sound Voice Recordings
Built in Alarm and Alert Signals
Up to 4 Minute Message Capacity
Works with 12VDC or 24VDC Fire Alarm Panel
Works with Analog/Addressable and
Microprocessor based Fire Alarm Panels.
3 Minute Message Restart on Microphone Key
Made in the USA.
Fully Supervised
The Hochiki FNV High Rise Evacuation System
operates in conjunction with the Fire Alarm Control
Panel (FACP) in a building to provide automatic
response to life safety emergencies.
The Hochiki FNV includes all necessary features
to provide an effective voice evacuation system.
The Hochiki FNV can be custom configured to
satisfy the needs of any high rise application.
Fire department authorities can easily take
command of evacuation or relocation procedures
and emergencies. Building management and fire
brigades can monitor and control emergency
response even before the professionals arrive
The FNV system includes capacity for 6 channels
of simultaneous audio. This provides for
evacuation, stay-in-place, or other public address
announcements and automatic messages.
Fire Fighter Phones or Warden Stations may be
included as required. Area-of-Rescue stations can
reassure handicapped occupants that help is on
the way. Smoke control, stair pressurization, and
HVAC shutdown can be completely automatic,
unless controlled manually by management or fire
authorities.
System Configuration:
Basic System Includes:
Distributed Panel (FNV-DP)
4 Output Zones (may be configured for 8)
Dual Channel Audio Interface
Dual/Single Channel Amplification
Amplifier Options:
25 / 50 / 100W Dual Channel
25 / 50 / 100 / 200W Single Channel
Optional
Integrated Fire Phone
4 Circuits expandable to 8 or 12
Area-of-Rescue
Fan and Damper system control
Maximum System Configuration
Up to 256 Distributed Panels (FNV-DP)
FNV-DP
High Rise Voice Evacuation System
Distributed Panel
TB1
TB3
TB2
1 2 3 45 6 7 8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
10
11
MESSAGE
GAIN
MIC
GAIN
FAULT
NORMAL
ALARM
YEL
GRN
RED
J2
1 2 3
J1
P2
S1
SN1
TB1
TB3
TB2
1 2 3 45 6 7 8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
10
11
MESSAGE
GAIN
MIC
GAIN
FAULT
NORMAL
ALARM
YEL
GRN
RED
J2
1 2 3
J1
P2
S1
SN1
DCC
TB1 TB2
P1
P2
P3
P4
J1
1
2
3
DCC
MBR
TB2 TB3 TB4
TB5
TB6
TB7
TB8
1 2 3 4
TB1
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
1 2 3 41 2 3 4 1 2 3 4 1 2 3 4
AMI
MBK
FNV-25E FNV-25E
1
8 “B”
4 “A”
LISTED
7051 Village Drive, Suite 100 Buena Park, CA 90621-2268 714.522.2246 www.hochiki.com
firealarmresources.com
MBR
TB11
TB9
TB8
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
1 2 3 4 1 2 3 4 1 2 3 4
P10
P14
P15
P1 P2 P3
TB3
P1
DCC
TB1
TB3
TB2
1 2 3 45 6 7 8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
10
11
MESSAGE
GAIN
MIC
GAIN
FAULT
NORMAL
ALARM
YEL
GRN
RED
J2
1 2 3
J1
P2
S1
SN1
TB1
TB3
TB2
1 2 3 45 6 7 8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
10
11
MESSAGE
GAIN
MIC
GAIN
FAULT
NORMAL
ALARM
YEL
GRN
RED
J2
1 2 3
J1
P2
S1
SN1
FNV-25E
1 2 3 4
10K
EOLR
10K
EOLR
10 PIN RIBBON10 PIN RIBBON
MBK
FPI
AMI
SEE FIG. 2 FOR FPI TO MBR CONNECTION DETAIL
SEE FIG. 3 FOR AMI TO AMPLIFIER CONNECTION DETAIL
FNV
Distributed Panel
Connection Detail
FNV-25E
Speaker Circuits
Fire Phone Circuits
Set EOLR
firealarmresources.com
AMI
10 PIN RIBBONS
This side plugs
into MBR, 1st
slot on right
To right side
Amplifier
To left side
Amplifier
FPI
This side plugs
into MBR, 2nd
slot on right
MBR J7
TO MBR J7
10 PIN RIBBON
FPI to MBR Connection AMI to Amplifier Connection
MBR
TB2 TB3 TB4
TB5
TB6
TB7
TB8
1 2 3 4
TB1
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
1 2 3 41 2 3 4 1 2 3 4 1 2 3 4
A M I
M B K # 1
45678
3
21 EOLR
EOLR
EOLR
Standard Life Safety Speakers,
Strobes connected and powered separately
E
O
L
E
O
L
E
O
L
M B K # 2
Eight Class “B” Speaker Lines
1
2
8
FF
II
RR
EE
FF
II
RR
EE
FF
II
RR
EE
FF
II
RR
EE
FF
II
RR
EE
FF
II
RR
EE
Second FNV-MBK card provides
additional speaker circuits
May be configured as several options
TB2 TB3 TB4
TB5
1 2 3 4
TB1
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
1 2 3 41 2 3 4
4
3
2
1
Four Class “A” Speaker Lines
FF
II
RR
EE
FF
II
RR
EE
FF
II
RR
EE
FF
II
RR
EE
EOL EOL
Eight Class "B" may
also be configured
as 4 A / B circuits
Each FNV-DP panel may
have up to 4 FPI cards for
a max. of 16 phone circuits.
(Additional FPI cards require
an FNV-FPO for circuit termination)
Each AMI card provides audio
channels and control to two
amplifier modules or amplifier
banks. Maximum configuration
is 5 AMI cards in each FNV-DP.
(Additional modules would mount in
separate cabinets)
firealarmresources.com
Distributed Panel Configurations:
FNV-DPS25 Distributed Panel, Single Channel, 25W
FNV-DPS50 Distributed Panel, Single Channel, 50W
FNV-DPS100 Distributed Panel, Single Channel, 100W
FNV-DPS25/P Distributed Panel, Single Channel, 25W, Fire Phone
FNV-DPS50/P Distributed Panel, Single Channel, 50W, Fire Phone
FNV-DPS100/P Distributed Panel, Single Channel, 100W, Fire Phone
FNV-DP25 Distributed Panel, Dual Channel, 25W
FNV-DP50 Distributed Panel, Dual Channel, 50W
FNV-DP100 Distributed Panel, Dual Channel, 100W
FNV-DP25/P Distributed Panel, Dual Channel, 25W, Fire Phone
FNV-DP50/P Distributed Panel, Dual Channel, 50W, Fire Phone
FNV-DP100/P Distributed Panel, Dual Channel, 100W, Fire Phone
Technical Characteristics:
Primary Power: 120 VAC
24 VDC Battery Power
Backbox Dim: 14.5 x 27 x 4“ whd
Color: Charcoal Grey std Red optional
••
••
Electrical Ratings: All Circuits @ 24VDC. Communications Bus: RS-485 Standard,
1M Baud data rate, Category 5 cable.
Voltage: 5V peak-to-peak max.
Current: 50mA max.
Impedance: 120 Ohms
(max. imp. between panels)
Frequency: 1.024MHz
Battery Charging: Maximum charging current from
FNV-25/50 is 800mA. Maximum battery size is 17AHr.
FNV-100 Maximum battery size is 24AHr.
DCC
MBR
AMI
FPI
55 mA
10 mA
10 mA
13 mA
Distributed Panel
Panel Options: Cards may be added as job requirements demand
FNV-MBK Motherboard Relay Card Expands MBR output 8 Class B or 4 Class A speaker circuits
FNV-FPI Fire Phone Interface Card Included in /P panels, up to 3 additional cards may be added
FNV-FPO Fire Phone Output Card Used with additional FNV-FPIs for termination
FNV-AMI Audio Module Interface Card Included with basic panel, additional cards give the ability to control
multiple modules or accommodate full 3 channel operation
55 mA
55 mA
10 mA
13 mA
Standby Alarm
Specifications are subject to change without notice. Specifications
are provided for information only and no responsibility is assumed
by Hochiki America, Inc. for their use.
firealarmresources.com
/