Samsung Smart LED Lamp Application
USER GUIDE
Application Contents
1. Overview
1.1 System Requirements
1.2 Application Flow
1.3 Basic Functions
1.4 Mode Functions
1.5 Advanced Functions
1.6 User Type
2. Smart LED Lamp Installation Guide
2.1 Installation by Administrator (First User)
2.2 Installation by Additional Users
3. The Screen Layout and Usage
3.1 Loading
3.2 Password
3.3 Adding a Bulb
3.4 Deleting a Bulb
3.5 Adding a Lighting
3.6 Main Control - Group
3.7 Main Control - Lighting
3.8 Mode Control
3.9 Bulb List
3.10 Lighting List
3.11 Options - Timer
3.12 Options - Incoming call alert
3.13 Options - Shake to turn on
3.14 Settings - Group
3.15 Settings - Lighting
3.16 Settings - Bulb
3.17 Settings - Self repair
3.18 Settings - Password Check / Version Check
3.19 Exit
2
1.1. System Requirements
1.2 Application Flow
1.3 Basic Functions
1. Overview
This app runs on Smartphones with Android 4.3 or higher and Bluetooth 4.0. To run the app, at least one Smart Bulb must
be turned on. If more than one Bulb is turned on, the app automatically nds and connects to the Bulb with the strongest
Received Signal Strength Intensity (RSSI). The Smart Bulb app only runs on Smartphones with the Samsung Smart LED
Lamp app and cannot connect to other BLE (Bluetooth Low Energy, Bluetooth 4.0) devices.
The basic app usage is as follows:
Launch the app
Search for Bulbs Connect to a Bulb Create and save the Bulb information Create and save
the Lighting information Create and save the Group information Control the Bulb and Control through Advance
Functions (Incoming Calls, Shake to turn on, Timer) Disconnect from the Bulb Exit the app.
This app provides individual Bulb control, Lighting control, and Group control functions. A bulb refers to an individual lamp.
‘Lighting’ refers to the lighting the Bulbs belong to. A ‘Group’ refers to the space the lighting belongs to. For instance, a
standing lighting (Lighting) in a living room (Group) may consist of one or more bulbs. A Bulb must be registered to a single
Lighting; it cannot be registered to more than one Lighting. Multiple Bulbs can be registered to a Lighting and a Lighting
can be registered to multiple Groups. You can add or delete Lightings from Groups using the Setting Lighting or Setting
Group functions. You can register up to 64 Bulbs and up to 16 Lightings. For Groups, 5 basic groups are provided by default
(All, Living Room, Bed Room, Kitchen and Bathroom) and users can create 12 additional groups.
3
1.5 Advanced Functions
1. Overview
This app provides the following 3 advanced functions.
1) Timer (Wake-UP) function
∙ You can turn on each individual Lighting at a specied time.
∙ You can set On/O/Fade in/Fade Out eects.
∙ The On/O setting automatically provides a 3-minute Fade In/Out.
2) Incoming call alert function
∙ This function causes the Lighting to blink in the Cool White color when the call arrives.
3) Shake to turn on function
∙ If you shake the mobile device after enabling this function, the Lighting is turned on in the Warm White color at
10% brightness.
1.4 Mode Functions
This app provides a Mode control function. A Mode saves the unique control settings for individual Lightings so that they
can be controlled with a single click. It provides a kind of Scene control function. 5 basic Modes are provided and users can
create 13 additional modes.
Mode Color Temp. Brightness Functions
Concentration Cool 100%
Provides a high color temperature and brightness
(to draw attention)
Energy Neutral - 2 60%
Provides a medium color temperature and brightness
(for energy saving)
Relax Warm 20%
Provides a low color temperature and brightness
(for rest)
Sleep
Current
Status
0%
Bulbs are turned o after 10 minutes (Timer function. The
time is not congurable.)
To cancel the Sleep operation, control the corresponding
Lighting/Zone on the main screen.
Daylight Variable Variable
Varies the color temperature and brightness
(between 06 to 17 o’clock)
4
1.6 User Type
1. Overview
This app provides Administrator and Additional User modes so that multiple users can control the same Bulbs.
1) Administrator
∙ This mode provides the highest authority to run all functions including those reserved for Administrators such as
search for, add or delete a Bulb, allocate a Lighting, and control individual Bulbs.
2) Additional Users
∙ This mode provides the authority to run functions other than those reserved for Administrators.
Additional Users must use the password created by the Administrator. Additional Users can control Lightings and
Groups by importing the Lightings created by the Administrator.
Authority Administrator Additional Users
Search/Add/Delete Bulbs
Register Bulbs to Lightings
Control Individual Bulbs
Available Not Available
Add/Control/Manage Lightings
Add/Control/Manage Groups
Timer (Wake - up) function
Incoming Call function
Shake to turn on function
Self-Repair function
Available Available
5
2.1 Installation by Administrator (First User)
2. Smart LED LAMP Installation Guide
1) Turn the lighting where the Smart LED Lamp will be installed o and remove the existing bulb.
2) Install the Smart LED Lamp in the lighting socket.
3) Connect to Google Play (Android App Market) on your Smartphone.
4) Type ‘Samsung Smart LED Lamp’ in the search keyword input eld to search for the app.
5) Move to the detailed description page of the found app and tap the Install button.
6) Turn the lighting on and run the ‘Samsung Smart LED Lamp’ app.
7) Select ‘Administrator’ and enter the password when the app runs.
∙ For the password, refer to Section 3.2 Password.
8) In the ‘Add Bulb’ screen, add the Smart LED Lamp installed on the lighting to the app.
∙ Tap the [+Add] button to search for surrounding Smart LED Lamps (that are turned on).
∙ Press the [Find] button of a found lamp. The chosen lamp is registered to the app and blinks approximately 5 to
10 seconds. The registered Smart LED Lamps are automatically named in sequence.
9) Tap a registered Smart LED Lamp to congure the Lighting setting.
10) Register all the lamps to Lightings and tap the [<] button at the top.
∙ Although the app runs even if not all the lamps are registered to Lightings, you can only control unregistered
Smart LED Lamps through [All Groups].
∙ It is recommended registering all the lamps to Lightings.
11) You can control registered Lightings using the Pallet window and the On/O button.
6
2.2 Installation by Additional Users
2. Smart LED LAMP Installation Guide
1) Connect to Google Play (Android App Market) on your Smartphone.
2) Type ‘Samsung Smart LED Lamp’ in the search keyword input eld to search for the app.
3) Move to the detailed description page of the found app and tap the Install button.
4) Turn the lighting on and run the ‘Samsung Smart LED Lamp’ app.
5) Select ‘User’ and enter the password when the app runs.
∙ A user must enter the password set by the Administrator.
∙ For the password, refer to Section 3.2 Password.
6) Move to the Main Control screen, tap the [ ] button at the top right, and move to the Settings screen.
7) Select a Lighting from the Setting List and tap the [+Add] button to add the Lighting.
∙ The User must add the same number of Lightings as the Administrator. However, the User doesn’t need to set them
to the same names and types as the Administrator.
∙ For more information about registration, refer to Section 3.15 Lighting.
8) You can control registered Lightings using the Pallet window and the On/O button.
7
3.1 Loading
3. The Screen Layout and Usage
The Smart LED Lamp App provides Administrator and User modes.
[1] Yes : Supports all functions including the Bulb registration, management
and control functions.
[2] No : Supports all functions except Bulb registration, management and control.
1.6 User Types
An Administrator has the authority to manage bulbs and control the overall settings
when more than one user is using the Smart LED Lamps. An Additional User also can set
and control Lightings and Groups by entering the password set by the Administrator.
The following describes the screen layout and usage when the app is launched for the rst time.
12
8
3. The Screen Layout and Usage
3.2 Password
The password is a unique number used by users to control bulbs from a Smartphone.
Additional Users must enter the password specied by the administrator.
[1] Enter a password of 4
~
8 characters.
[2] Tap the Save button at the top of the screen.
[3] Tap the OK button in the message box.
[Note] Since the password cannot be changed, users must not lose or forget the password.
[Note] Users can view the password set by the administrator by selecting Settings - Password from the menu.
1
2
3
9
3.3 Adding a Bulb (Administrators Only)
3. The Screen Layout and Usage
[1] Tap the “+Add” button on the Add Bulb page.
The “You have to move closer to the registered bulb. Art you ready to proceed now?” message appears.
[2] Tap the OK button to search for nearby Smart Bulbs and view a list of found bulbs on the screen.
[3] Tap the Cancel button to cancel the search.
1
23
10
[4] Found bulbs that are not registered are described as “Unregistered Smart bulb”.
[5] Tap the “Find” button of the bulb to be registered. The selected bulb is registered to the app and blinks for a moment.
[6] Registered bulbs are named Smart bulb # (“#” refers to the sequential number) and enlisted.
[7] Tap the “Find” button of a registered bulb to identify the registered Bulb by making it blink.
[8] To register a new Lighting, tap the +Add Lighting.
[9] To register a bulb under the registered Lighting category,
choose a Lighting from the list.
[Note] Refer to the Section 3.5 for adding a lighting.
4 5 6 7
3. The Screen Layout and Usage
11
8
9
3.4 Deleting a Bulb (Administrators Only)
3. The Screen Layout and Usage
[1] Tap the Delete button on the Add Bulb page.
[2] Select the bulb to be deleted.
[3] Tap the Delete button.
[Note] Once a Bulb is deleted, the bulb information is reset. You’ll need to scan and register the bulb again on the Add Bulb
page to use the Bulb again.
If the Smartphone and the bulb to be deleted are too far away, the failure message will be displayed on the
message box.
After deleting a bulb, you need to turn the deleted bulb o and then on again.
1 3
2
12
3.5 Adding a Lighting (Administrators Only)
3. The Screen Layout and Usage
[1] Select a registered bulb on the bulb list page.
[2] If there is no registered Lighting, tap the +Add Lighting button.
The Add Lighting page appears.
[3] Select a Lighting Type.
[4] Type a Lighting Name.
[5] Select a Group for the Lighting. (5 basic groups are provided by default. Users can add up to 12 more groups.)
[Note] Even if a Group is not set for a Lighting, all Lightings can be controlled through [All Groups].
[6] Set the Incoming call alert service (optional feature)
[7] Set the Shake to turn on service (optional feature)
For more information about [6] and [7], refer to the descriptions about the options in Sections 3.12 and 3.13.
You can only add a Lighting using the Add Bulb function in Administrator mode.
In User mode, you can search for a Lighting created by the Administrator by selecting Settings
Lighting, adding it, and
then using it.
1
2
3
4
5
6
7
13
3. The Screen Layout and Usage
[8] When the Lighting is added, you can view it on the ‘Bulb’ page.
[9] Select a Bulb for which a Lighting has not been added.
[10] To register a bulb to a registered Lighting, select a Lighting from the list.
To register a new Lighting, tap the +Add Lighting button. (Repeat from step [2].)
8
9
10
14
3.6 Main Control [Group]
[1] The name of the currently selected Group. [The default setting is All Groups when the app runs.]
[2] The On/O button for the currently selected Group.
[3] The list of Lightings belongs to the currently selected group.
[Note] If you tap on the Lighting, the Group settings page changes to the individual Lighting settings page.
[4] The Group Settings button.
[5] The pallet where you can control the currently selected group.
[6] The color temperature/brightness selected on the pallet page.
You can control all the Lightings allocated to the selected Group in one go through the pallet.
[7], [8] and [9] below are descriptions about the Group settings page that shows when the [4] Group Settings button is
selected.
[7] Rename a Group (Users can rename used-added groups).
[Note] You cannot rename the basic groups All, Living Room, Bed Room, Kitchen and Bathroom.
[8] You can select a background image for the Group screen.
∙ Tap the “+” button to retrieve an image from the Gallery or take a picture.
(You can save up to 12 images including the basic images.)
[9] You can choose Lightings to be registered to the Group.
3. The Screen Layout and Usage
12
3
4
6
5
7
8
9
15
[10] To add a Group, select the Group popup icon. [11] Select the Add button.
[12] Type a Group name. [13] Select a Background Image to be used for the Group screen.
[14] Select a Lighting to be registered to the Group. [15] Select the Save button.
[Note] When you add a Group, you must allocate at least one Lighting. Otherwise, the group will not be created.
For information about deleting a Group, refer to Section 3.14.
10
11
12
13
14
15
3. The Screen Layout and Usage
[16] Select a registered Group. [17] Control the selected Group.
16
17
16
3.7 Main Control [Lighting]
Select a Lighting in the Group settings screen to open the Lighting settings page.
[1] The name of the currently selected Lighting.
[2] Tap to return to the Group settings page.
[3] The Lighting Type
[4] The Lighting settings button
[5] The pallet to control the currently selected Lighting.
[6] The color temperature/brightness selected on the pallet page.
You can control all the selected Lightings in one go through the pallet.
If you select [4], the Lighting settings page appears.
[7], [8] and [9] describe the Lighting settings screen that appears when the [4] Lighting settings button above is selected.
[7] Change the Lighting Type
[8] Rename the Lighting
[9] Change the Group to which the Lighting belongs
[10] Set Timer [11] Start Timer
[12] Set Incoming call alert [13] Incoming call alert On/O
[14] Set Shake to turn on [15] Shake to turn on On/O
[Note] For more information about [10]
~
[15], refer to the descriptions about options in Section 3.11, 3.12 and 3.13.
To delete a registered Lighting, refer to Section 3.15.
3. The Screen Layout and Usage
2 1
3
4
5 6
7
8
9
10 11
12 13
14 15
17
3. The Screen Layout and Usage
3.8 Mode Control
[1] Select the More icon on the settings page.
[2] Select a Mode.
There are 5 basic modes provided: Concentration, Energy, Relax, Sleep and Day Light. (These cannot be deleted.)
[3] Select the “+” Add button to add a user mode.
[4] Type the Mode name.
[5] Add the Lightings to be used in the Mode.
[6] Select the Lightings whose color temperature and brightness are to be set. (Multiple Lightings can be chosen.)
[7] Select the color temperature and brightness using the pallet. (The default values for the Mode are color temperature
2700K and brightness 80%).
[8] Conrm the settings through the pallet.
[9] Select the Save button.
[Note] If you did not set the color temperature/brightness for the Lightings when you set the Mode, there will be
no change when the Mode is executed.
1
2
3
4
5
6
8
7
9
18
[10] To delete a user-registered Mode, tap and hold the Mode icon.
[11] Tap the “-” icon to delete the Mode.
[12] Select the Done button to nish the deletion.
10 11
12
3. The Screen Layout and Usage
[13] To edit the user-registered Mode, select the Mode name.
[14] Change the Mode name, Type or settings (color temperature/ brightness), and select the Save button.
13
14
19
3.9 Bulb List (Administrators Only)
[1] Select the More icon in the Control screen.
[2] Select the Bulb list.
[3] Select a Bulb to control from the list and select On or O.
[Note] You can control each individual bulb in the Bulb list. (Administrators only, Users can’t use this function.)
1
2
3
3. The Screen Layout and Usage
20
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
Samsung GB8XH9009AF3EU Quick start guide
- Type
- Quick start guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Samsung GB8XH9009AF0EU Quick start guide
-
-
-
-
-
-
-
Samsung Galaxy S 4 Zoom User manual
-
-
Other documents
-
Commax CIP-700M/CIP-700MS Owner's manual
-
-
-
Corsair CH-9101024-NA User manual
-
Corsair K70 RGB User manual
-
CREE LIGHTING CMST19-60W-AL-9TW-GL User manual
-
Corsair Sabre User manual
-
Samsung Electronics SM-G970UZIAXAA User manual
-
-
Feit Electric Alexa / Siri / Google Assistant Owner's manual
