2. ETC
  3. CarPlay NV17

ETC CarPlay NV17, CarPlay NV17-AV MODULE C V001 User manual

  • Hello! I am an AI chatbot trained to assist you with the ETC CarPlay NV17 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
- MODEL : NV17-AV_MODULE_C_V001
- DATE : 2019.01.14
CarPlayCarPlay NV17NV17
ManualManual
1
IndexIndex
1. Main Spec
2. Dimension
3. External Appearance
4. Connector Pin Assignment
5. Product Composition
6. Setting
7. Install Manual
8. Q & A
2
1. Main Spec.1. Main Spec.
3
1. Input Spec.
- 1 x USB Input
- 1 x Microphone Input
- 1 x Real Analog Touch Input
2. Output Spec.
- 1 x LVDS(HDMI Connector) Output
- 1 x Audio L/R (3.5Ф Stereo Jack) Output
- 1 x Mono Speaker
3. Power Spec.
- Input Power : 8VDC ~ 24VDC
- Consumption Power : 12Watt, Max
82mm * 134.5mm * 23mm
2. Dimension2. Dimension
82mm
134.5mm
23mm
* This can change under manufacturer’s circumstance
4
POWER/CAN
3. External Appearance 3. External Appearance
LED
PROGRAMIMAGE
Video
R-TOUCH
Analog
RGB
DIP S/W
Digital
RGB
LCD-OUT
Rear
Camera
5
3. External Appearance 3. External Appearance
POWER/CAN
LVDS&UART
OUT
Touch
Smartphone Connection
Made Switch to
Enter Setting
Microphone In
6
Speaker
AUX
*POWER Connect
① ACC
② GND
① ②
*Touch Connect
① Y-
② X-
③ Y+
④ X+
① ② ③ ④
7
4. Connector Pin Assignment4. Connector Pin Assignment
5. Product Composition5. Product Composition
Interface 1 EA
AUX Cable 1 EA
Power Cable 1 EA
SPEAKER Cable 1 EA
HDMI Cable 1 EATOUCH Cable 2 EA
8
Microphone 1 EA
SPEAKER 1 EA
6. Setting6. Setting
9
Press the setting button for 3
seconds.
When the above menu appears, press the setting
button for 3 seconds.
Correct the touch when the screen
changes.
Vehicle must be powered on without OEM touch
display.
①
③
②
④
7. Install Manual7. Install Manual
10
Interface
Iphone
Screen
8. Q & A8. Q & A
11
1. Check the LED status first when interface failure..
- If there is no abnormality after the power is applied, the green LED flashes in units of 1 second.
- If the red LED flashes for 1 second, there is no.
- If the red LED is on continuously, the interface itself is bad.
- If nothing turns on, check that the power and CAN signals are properly connected
2. Q : When the screen turns black
A : LVDS cable itself is bad or bad contact.
3. If you find any symptoms with these symptoms, please contact your distributor
.
/