Hitachi C43WP910TN User manual

Brand: Hitachi

Model: C43WP910TN

Category: AV receivers

Type: User manual

This manual is also suitable for

C55WP910TN

Users Guide

C43WP910TN

C55WP910TN

Projection

Television

SCREEN

introduction

Dear HITACHI customer

Congratulations on your purchase of the very latest state of the art

technology. At Hitachi we pride ourselves on producing high quality televisions

with outstanding picture and audio capabilities, coupled with Hitachi’s

reputation for superior reliability. You should enjoy many years of trouble free

operation from your TV. Take some time to read this Users Guide thoroughly,

and if you encounter any difficulty, firstly refer

to the Trouble Shooting Guide at the rear of this manual. In the unlikely event

of a problem occurring with your TV, contact your dealer immediately.

...notes on digital sound

Your Hitachi television is capable of decoding advanced forms of digital

audio (such as Dolby Digital, DTS, MPEG and PCM) coding that makes it

possible to reproduce high-quality digital sound. Being the next step forward

from analogue sound, digital sounds sonic realism and listener involvement

will change the way you experience sound from your Hitachi television. Digital

sound works by delivering at maximum 5 separate audio channels - left,

right, centre, left surround, right surround and also a LFE (Low Frequency

Effects) channel. These independent channels allow for a more precise

localisation of sounds and a more convincing, realistic ambience.

Dolby Digital

Manufactured under license from Dolby Laboratories. “Dolby”, ”Pro Logic”

and the double-D symbol are trademarks of Dolby Laboratories. Confidential

DTS

Manufactured under license from Digital Theater Systems, Inc. US Pat. No.

5,451,942 and other world wide patents issues and pending. “DTS” and “DTS

Picture Cautions

Fixed (non-moving) patterns and images can cause permanent

damage to your projection television. Such

‘pattern burns’

constitute

misuse and are not covered by your HITACHI guarantee. To avoid

damaging your TV HITACHI recommend

1. Do not use with video games machines.

2. Do not use a teletext page for a long time.

3. Do not watch a still picture for a long time.

4. Do watch mainly moving pictures only.

5. Do not watch pictures which display permanent logo. These can be

removed from the screen by changing the aspect ratio of your TV

(see television features - wide screen viewing)

contents

safety aspects

Television Safety ................................................................................5

Battery Safety and Installation............................................................6

set-up and tuning in

Aerial and VCR Installation..................................................................7

Aerial, Satellite and VCR Installation ..................................................8

TV Set Up and Automatic Tuning Procedure ....................................9

Manual Tuning Procedure ..................................................................10

Magic Focus Adjustment ..................................................................12

handset controls

On Screen Menu Navigation ..............................................................13

Television Operation ..........................................................................14

Teletext Functions..............................................................................15

program, sound and vision adjustment

Picture Controls ................................................................................16

Program Swap ..................................................................................17

Program Name Change ....................................................................18

Sound and Language Controls ..........................................................19

Audio and Equalizer Controls ............................................................20

Sound Mode ......................................................................................22

Speaker Setup....................................................................................24

Digital Audio Setup ............................................................................28

Digital Audio Status - Decode Mode..................................................29

Digital Audio Status - Display Format ................................................30

television features

Wide Screen Viewing ........................................................................31

Sleep Timer and Default viewing controls ..........................................33

Teletext Operation ............................................................................34

Teletext Dual Page ............................................................................35

Progressive Scan and 100Hz picture ................................................36

other equipment connection

Front Control Panel Details ................................................................37

Audio Visual Setup ............................................................................38

Rear socket and Scart details. ..........................................................39

Left and right external speakers. ......................................................40

DVD, CD and Laser Disc connection ................................................41

Camcorder ......................................................................................42

Signal Source Entry............................................................................43

television information

Trouble Shooting Guide - Digital Sound..............................................45

Trouble Shooting Guide - Television Operation ..................................47

Guarantee..........................................................................................48

Hitachi Environmental Notice ............................................................49

Technical Data....................................................................................50

television safety

safety aspects

This television has been designed and manufactured to meet international safety

standards, but like any electrical equipment, care must be taken if you are to obtain

the best results and safety is to be assured.

DO NOT cut off the fitted mains plug as it may contain a special radio interference filter, the

removal of which could lead to impaired performance. If you wish to extend the lead, obtain

an appropriate extension lead or consult your dealer.

DO NOT continue to operate the equipment if you are in any doubt about it working

normally or if it is damaged in any way - switch off, withdraw the mains plug and consult

your dealer.

IF you intend placing this TV into a cabinet or a wall alcove, please ensure there is at least

a 100mm (10cm) gap to the sides, rear and top of the TV. This is to allow for adequate

ventilation during your TV's operation.

DO NOT leave equipment switched on when it is unattended unless it is specifically stated

that it is designed for unattended operation or has a stand-by mode. Switch off using the

switch on the equipment and show your family how to do this. Make special arrangements

for infirm or handicapped people.

DO NOT obstruct the ventilation of the equipment, for example with curtains or soft

furnishings. Overheating will cause damage and shorten the lifespan of your equipment.

DO NOT use makeshift stands and NEVER fix legs with wood screws - to ensure complete

safety, always fit the manufacturers approved stand or legs with the fixings provided

according to the instructions.

DO NOT allow electrical equipment to be exposed to rain or moisture.

NEVER let anyone, especially children, push anything into holes, slots, or any other

opening in the case - this could result in a fatal electrical shock.

NEVER guess or take chances with electrical equipment of any kind -

it is better to be safe than sorry!

DO be careful with any glass panels or doors on equipment.

DO consult your dealer if you are in any doubt about installation, operation or safety of your equipment.

DO place your TV on a flat surface, or if supplied, the stand accessory.

DO NOT remove any fixed cover as this may expose dangerous voltages.

DO ensure that all connections, (including the mains plug, extension leads and inter-connections

between the pieces of equipment), are properly made and in accordance with the manufacturers

instructions

. Switch off and withdraw the mains plug before making or changing connections.

DO NOT listen to headphones at high volume, as such use can permanently damage

your hearing.

DO read the operating instructions before you attempt to use the equipment.

DO NOT use equipment such as personal stereos or radios so that you are distracted

from the requirements of traffic safety. It is illegal to watch television whilst driving.

DO NOT place hot objects such as candles or nightlights on, or close to,

equipment. High temperatures can melt plastic and lead to fires.

DO observe the manufacturers instructions when connecting extension leads to your TV. The fuse

should be a 5 Amp fuse with the safety symbols and displayed. If you are in any doubt

about the extension installation, please consult a competent electrician.

Projection TV’s are heavy and can mark or damage floor

surfaces (especially wood flooring) if moved improperly. Do

not slide or force TV into position. Always roll TV allowing

castors at bottom of unit to help steer and position TV.

Use the adjuster leg (shown right) for stability once

TV has been positioned.

battery safety and TV installation

safety aspects

always

1. When inserting the batteries make sure the polarities are correct, that is, ‘+’ to ‘+’, ‘-’ to ‘-’.

2. Replace the batteries with the equivalent ‘AA’ type.

3. Discard old batteries safely, following the battery safety guidelines.

battery installation

Remove cover of handset by lifting up the cover at the recess.

Insert batteries into handset as shown and replace cover.

Take care to fit your batteries

correctly, observing the plus ‘+’

and minus ‘-’ marks on the

battery and appliance. Incorrect

fitting can cause leakage, or in

extreme cases, fire or explosion.

always

Replace the whole set of

batteries at one time, taking care

not to mix old and new batteries

of different types, since this can

result in leakage, or in extreme

cases, fire or explosion.

always

Store unused batteries in their

packaging and away from metal

objects which may cause a short

circuit resulting in leakage, or in

extreme cases, fire or explosion.

always

Remove dead batteries from

equipment, and all batteries from

equipment that is to be left for

long periods of time without any

use. Otherwise the batteries may

leak and cause damage.

never!

Never dispose of batteries in fire

as this can cause an explosion.

Respect the environment -

always dispose of batteries in an

environmentally friendly manner.

never!

Never attempt to recharge

ordinary batteries, either in a

charger or by applying heat to

them. They may leak, cause fire or

even explode. Rechargeable

NiCAD batteries and chargers can

be purchased from any good High

Street electrical retailer.

CHARGE

aerial and VCR installation

set-up and tuning in

aerial connection

aerial and VCR connection

*IMPORTANT NOTE. The best way to connect your VCR to the television is via one of the

Audio Visual sockets. When you connect your VCR to your television, the Audio Visual value

has to be set correctly to ensure best picture quality - see other equipment

connection-Audio Visual Setup.

connect VCR

‘out’ to

analogue TV

socket ‘in’

marked

scart lead

aerial wall socket

receiving aerial

connect aerial

connection lead to

the analogue‘in’

socket marked

connect aerial

connection lead to

the analogue‘in’ socket

marked

aerial wall socket

receiving aerial

Video

Cassette

Recorder

(this should be

plugged

into a mains socket)

aerial, satellite and VCR installation

set-up and tuning in

connecting to the mains socket

VHS video equipment should be connected to the AV2 scart socket located at the rear of your TV. A

dedicated program number may be assigned to AV2, allowing you easier access to view external equipment

broadcasts. How to assign an AV signal to dedicated program numbers is explained in Signal Source Entry.

satellite and VCR installation

Please Note:

- If you have not already done so, please read television safety

before connecting your television and external equipment.

insert plug...

...and switch on

A scart lead should be fitted between your TV and VCR to enhance your picture and sound quality.

Scart leads are essential if you have a stereo TV and VCR and wish to obtain stereo sound from your

equipment. These leads can also be purchased from your Hitachi dealer or any good electrical retailer.

connect VCR ‘out’ to analogue

TV socket ‘in’ marked

scart lead

aerial wall socket

receiving aerial

Video

Cassette

Recorder

(this should be plugged

into a mains socket)

connect aerial

connection lead to

the analogue‘in’ socket

marked

Satellite

Decoder

(this should be

plugged

into a mains

socket)

connect Satellite ‘out’ to VCR

socket ‘in’ marked

To avoid picture interference it is recommended that connection cables are kept from the right hand

side of the rear of the TV.

Before you switch on your television, it is important that the external speakers supplied

with your television are connected. This can be seen in the section other equipment

connection - rear socket and scart details

TV set-up and automatic tuning procedure

set-up and tuning in

The first screen will ask you to choose the

language of your TV’s display. Use the up

and down cursor buttons to choose

your language.

important note on VCR and satellite

Do not switch your TV on until all external equipment is connected. If you have a Video

Cassette Recorder or a Satellite receiver connected to this TV please ensure that they

are switched on before automatic tuning begins. In the case of a VCR, insert a

pre-recorded tape and begin playback of your equipment. With a Satellite receiver select

Sky News. These measures ensure that all your external equipment is tuned in during

the autotune procedure.

If you are satisfied all external equipment

has been connected, press the OK button

on your handset and AUTOTUNE will begin.

By using the up and down buttons you

can view all the programs found and

stored during AUTOTUNE.

To make your program

tuning easier, HITACHI have

installed an automatic tuning

procedure to find the

programs.

Switch your TV on.

To finish the installation process and return to normal TV operation press the menu

button on your handset twice.

Press OK to select

Next, the country screen requires you to select

the country in which you will be watching your

TV. Use left/right buttons to adjust.

Your TV will now search through the

frequencies, listing them into the following

order - 1.BBC1, 2.BBC2, 3.ITV

4.CH4/S4C, 5.CH5 (subject to availability)

6.Satellite.

Please Note: If there is no station name

information on broadcasting signal, the sorting order

is decided on signal strength.

Once your country of choice is in view

press the OK button to continue.

manual tuning procedure

set-up and tuning in

Press and hold the MENU button for 5

seconds. The INSTALL option in the

MAIN MENU appears.

Press the cursor down button to select

INSTALL.

Once highlighted, accept selection.

Press the cursor down button to select

MANUAL SETUP.

Once highlighted, accept selection

Once highlighted, accept the selection to

change the frequency and you will see the

selection bar turn red

- it is ready to be changed.

Use the cursor keys to move the

selection bar over the program

FREQUENCY required to be adjusted.

entry method 1

The first option will be to fine tune the

chosen frequency either up or down.

Select your choice of FREQUENCY entry

method using the left/right cursor keys.

...notes on manual tuning

As well as an automatic tuning procedure, your HITACHI television also allows you to input

broadcast frequencies through a number of different entry methods. Follow the steps below and

choose one of the 5 entry methods to input broadcast frequencies.

VCR should be tuned into Program 0.

manual tuning procedure

set-up and tuning in

Once the method of entry has been decided upon and the new frequency or channel

entered, this can then be stored in the TV's memory by pressing the confirmation

button.

To return to normal TV operation press the television button on your handset.

entry method 2

If the right cursor key is pressed,

autosearch becomes an option

- you can search either up or down.

entry method 3

If the right cursor key is pressed

again, you can enter a two digit channel

number (CH) using the buttons 0-9.

entry method 4

If the right cursor key is pressed

again, you can enter a two digit S-Band

number using the buttons 0-9.

entry method 5

If the right cursor key is pressed

again, you can manually input a five digit

frequency using the numbered handset

buttons 0-9.

If your TV is switched on but no broadcast signal is received, your TV will automatically

switch to standby mode after a period of 10 minutes.

Also note that audio channels may not be available with direct channel selection if the

channel you currently select is different sound system from previous one.

channel coverage

reception systems

1. BG, DK, H, I PAL,

2. BG, DK, H, I PAL, LL’ SECAM

3. NTSC 3.58, 4.43 (VCR only) 4. PAL/SECAM60, NTSC50 (VCR only)

Your Hitachi television will support the following broadcast standards and frequencies

Band

VHF (ch)

E2~S6

S7~S33

UHF (ch)

S34~E69

Frequency Coverage

45.75MHz (fp) ~ 855.25MHz (fp)

magic focus adjustment

set-up and tuning in

To aid convergence of the red, green and blue colours, improving the quality of your televisions picture.

Please Note:

This may take a few minutes to align.

magic focus

AUDIO IN

MAGIC FOCUS

L+

VIDEO IN

S-VHS

It is important to use this button whenever your TV has been moved for the 3 modes

NTSC 60Hz/PAL 50Hz/PAL 100Hz

To use the controls push the door in and release.

television controls door panel

...notes on magic focus

The magic focus of your

television has to be adjusted after all

programs have been tuned in to

ensure quality of your televisions

picture.This adjustment should be

made for each display mode that can

be received (PAL 50Hz Progressive

Scan, PAL 100Hz interlaced, and

NTSC 60Hz Progressive Scan. and

should be performed after you have

completed either the autotune or

manual tune procedure. Your

television screen will display ‘MAGIC

FOCUS' and will automatically align

the TV for that particular display

mode (this may take a few minutes).

step 1: PAL 50Hz Progressive Scan

1. Please ensure that your TV is tuned into a broadcasting signal (for example, BBC1)

and the TV is in Progressive Scan display (see television features - Progressive Scan

and 100Hz picture)

2. Press the Magic Focus button located on the front control panel to begin automatic

alignment of this display mode.

step 2: PAL 100Hz interlaced scan

1. Please ensure that your TV is in interlaced scan mode (that is, not in Progressive

scan mode. See television features - Progressive Scan and 100Hz picture)

2. Press the Magic Focus button located on the front control panel to begin automatic

alignment of this display mode.

step 3: NTSC 60Hz Progressive Scan

Follow the following steps if your externally connected equipment can output

an NTSC 60Hz signal

1. With your connected external equipment, begin playback of your players disc

2. Ensure that this NTSC 60Hz signal is being received by your television.

3. Press the Magic Focus button located on the front control panel to begin automatic

alignment of this display mode.

Please Note:

When your television detects a NTSC 60Hz signal it will automatically switch

to Progressive Scan mode.

This button is

used to return to the

previous on screen

menu you were

viewing, or to cancel a

selection.

Press this

button to leave the

menu you are on and

return to normal TV

operation.

This button is

used to enter the

main menu. This is

where your TV’s

features options are

displayed.

Use this button

to move the menu

selection box right.

Use this button

to move the menu

selection box down.

cursor down

cursor up

go back

exit

cursor right

The handset controls shown below

are used when programming your TV and

to adjust the sound and picture features.

cursor left

Use this button to

move the menu

selection box left.

Use this button to

move the menu

selection box up.

This button is used

to confirm a

highlighted

selection.

on screen menu controls

handset controls

Use these

buttons for control of

your VCR, Digital TV

and Set Top Box

receiver respectively.

other

equipment

When viewing an on-screen menu, there is a time delay of 20

seconds before your TV returns to normal operation. If no adjustments

are made within this time, your TV will return to normal operation.

This button

allows you to ‘freeze’

the picture being

viewed on your

television.

freeze frame

When teletext is

available, use this

button to display the

current time on screen.

time

This button

allows you to switch

the TV’s sound on and

off.

sound mute

This allows you

to directly input known

broadcasting CH or

frequency numbers.

frequency

Press this

button to view the

current TV status.

The handset controls shown here are used when your TV is in normal

operation.

Please Note: Items marked

are not available on this model.

Used to switch

your TV in and out of

standby mode.

standby

Used to increase

‘+’ or decrease ‘-’ your

TV’s volume.

volume controls

This button

allows you to switch

between the various

wide screen features

of your TV.

16:9 button

Used to select a

signal source for

external equipment.

AV input

Used to change

channels either up ‘+’

or down ‘-’

programme

controls

Use this button

to change the

scanning mode of your

TV - from 100Hz to

Progressive scan.

Progressive

Scan

television operation

handset controls

info

Used to enter

program numbers or

frequency/CH entry in

manual setup.

0-9 digit entry

If you are receiving a

stereo signal this button selects

between stereo and mono

channels, or different languages

if you are receiving dual

languages.

nicam/

language

This button is

used to return to the

previous screen you

were viewing, or to

cancel a selection.

cancel

Use this button to display

subtitles from external equipment

which may be obscured when in

C16:9L, C14:9LS, or C14:9L letterbox

modes. Press again to enter subtitle

text mode.

subtitles

teletext functions

handset controls

The handset controls shown here are used when you are

operating Teletext.

(red, green,

yellow, blue)

On certain pages in

teletext, these will have

coded instructions i.e. a

shortcut to a teletext

page or title.

colours

Restores TV

picture whilst the TV is

ooking for the entered

Teletext page.

Use this to access a subtitle page

directly (subject to subtitle service

broadcasting).

Use this button

to expand the size of

the teletext page on

view.

Press this

button to return to

normal TV operations

when in the teletext

mode.

When in

Teletext mode, press

once to display the

current page and the

next in the magazine,

press again to view

current page and TV

picture.

Used in Teletext

mode to show hidden

information eg. quiz

pages answers.

reveal

dual page

television

expand

subtitles

Pressing this

button will take you to

the index page (press

again to return to

Teletext)

index

When in dual

teletext mode, this

acts as a copy button

to copy the right hand

side page to the left

and side.

Use this to

‘freeze’ the teletext

page on display to

prevent the page

changing (press again

to continue).

hold

Press this

button to use the

Teletext services.

teletext

update

Use the menu

button to swap

between Fastext and

favourite page

options.

In Teletext

toggles between the

last and current page.

(in TV mode returns

from your current

viewing channel to the

previous one).

swap

Use this to clear

the left hand side page

if in dual teletext mode.

cancel

Press the MENU button to obtain

MAIN MENU.

The MAIN MENU highlights the PICTURE

option automatically - press OK to select.

Select the picture control to be adjusted by

using the up / down cursor buttons.

Once highlighted, adjust the chosen

controls by pressing the right / left cursor

buttons.

To select MORE options use the up/down

buttons to highlight selection and then

press OK to confirm.

Select the picture control to be adjusted by

using the up/down cursor buttons.

Once highlighted, adjust the chosen controls

by pressing the right/left cursor buttons (for

explanation see below)

The values changed will remain until they are

next altered. Press the TV button on your

handset to return to normal TV operation.

For picture and sound values, moving the cursor

left will decrease

values, whilst moving

the cursor

right will increase

values. Also note that in the COLOUR adjustment the first two

steps of the control bar will have a dramatic effect. This is normal operation.

Noise Reduction

Helps reduce the noise interference visible on your television, especially in weaker signal reception areas.

White Point

NORMAL - gives an equally balanced spectrum of colour.

COOL - exaggerates the blue tones of your television picture.

WARM - this exaggerates the red tones of your television picture.

CTI

Colour Transient Improvement - This control lets you improve the clarity of your televisions colour edges.

Comb Filter

This control lets you remove ‘swirling’ cross colour when your picture contains close or small check patterns.

Black Stretch

This control turns all dark areas of your television picture black.

picture controls

program, sound and vision adjustment

Hue

This option is only available when receiving a NTSC signal. Controls the colour ‘tint’ transmitted from your

picture.

program swap

program, sound and vision adjustment

Press and hold the MENU button for 5

seconds. The INSTALL option in the

MAIN MENU appears.

Press the cursor down button to select

INSTALL.

Once highlighted, accept selection.

Press the cursor down button to select

MANUAL SETUP.

Once highlighted, accept selection.

Once highlighted, accept the selection

and you will see the selection bar

turn red - it is ready to be swapped.

Using the up/down buttons again you can

move the selection to occupy a new

position of your choice.

Once this has been done, accept selection

and the chosen programs will now occupy

its new position - repeat if necessary.

To return to normal TV operation press the

television button on your handset.

Select your program to swap by moving

the selection bar using the

up/down cursor buttons over a channels

PR number, highlighted in blue.

When a channel has been selected, you also have the option to ‘hide’ a program - this

makes your TV skip the hidden channel when the program controls are used to change

channels. Press the ‘0’ digit on your handset and you will see the text within your chosen

selection turn red. Your selection is hidden. Pressing the ‘0’ button again to ‘unhide’ the

selection. If a hidden channel is to be viewed, this can be achieved by entering the channel

number with the handset digits 0 to 9.

Press and hold the MENU button for 5

seconds. The INSTALL option in the

MAIN MENU appears.

Press the cursor down button to select

INSTALL.

Once highlighted, accept selection.

Press the cursor down button to select

MANUAL SETUP.

Once highlighted, accept selection.

Once highlighted, accept the selection to

change the name and you will see the selection bar

turn red and the chosen character will flash

on and off - it is ready to be changed.

Note: Pressing the ‘0’

button will clear all the characters of the

chosen name.

You can input up to 5 characters

- to

change

each character use the

up/down cursor buttons.

move

from character to character

use the right/left cursor buttons.

Once the new NAME has been chosen and

entered, confirm your entry to be stored

and repeat if necessary.

To return to normal TV operation press the television button on your handset.

Use the cursor keys to move the

selection bar over the NAME

required to be adjusted.

program name change

program, sound and vision adjustment

...notes on program name change

Program name change can be very useful if you connect external equipment to your television.

For example, if you have a DVD player connected, you can allocate the name ‘DVD’ to the program

number allocated for that piece of external equipment.

If a mistake is made re-naming channel,

press cancel before pressing OK to return to

the original name.

sound and language controls

program, sound and vision adjustment

...notes on nicam features

Nicam is a method for transmitting and receiving stereo sound. If your TV is unable to receive

Nicam because of the wrong geography, climate etc., or when Nicam in not transmitted in your

location it will produce a monaural sound source.

stereo

This effect produces nicam digital

stereo sound from your TV. Use this mode for

the majority of TV viewing. When selected the

stereo symbol appears.

Use the button on your handset to switch

to stereo and monaural

monaural

In this mode the TV produces a single

sound source. The TV will automatically select

this sound when a mono signal is found. Some

stereo signals can be poor in adverse weather

conditions, and mono should be selected to

avoid poor sound.

Use the button on your handset to switch

to monaural and stereo.

The sound source, when chosen, will be stored with the program number being viewed.

channel 1

When this symbol is displayed, channel 1

of a dual language broadcast is being received.

Use the button to access this mode while

receiving a dual language broadcast.

channel 2

When this symbol is displayed, channel 2

of a dual language broadcast is being received.

Use the button to access this mode while

receiving a dual language broadcast.

...notes on A2 stereo features

A2 stereo is an FM stereo system which can be available where the BG and DK standards are

broadcast. It consists of two channels, and allows either a stereo broadcast or a dual language

broadcast to be received.

...notes on dual language transmissions

A dual language transmission is where channel 1 and channel 2 of the Nicam/A2 stereo

broadcast carry completely separate information i.e. soundtracks in two different languages for a

movie. A dual language broadcast is denoted by a symbol ( or ) in the top right hand corner of

the screen. This can be seen on first entry to the channel by pressing the INFO button on your

handset.

The user can select which of the two is heard through both the left and right television speakers by

using the button on your handset. In the case of a Nicam dual language broadcast, this will also

allow the mono FM broadcast to be selected.

audio and equalizer controls

program, sound and vision adjustment

Select the control to be adjusted by

using the up/down cursor buttons.

Once highlighted, adjust the chosen controls

by pressing the right/left cursor buttons.

You can view the EQUALIZER screen by

selecting ‘MORE’ using the up/down

cursor buttons.

Once highlighted, accept selection.

Press the MENU button to obtain

MAIN MENU.

Press the cursor down button to select

AUDIO.

Once highlighted, accept selection.

equalizer

The EQUALIZER menu is used to adjust the tonal ranges of your TV’s sound.

LFE Volume

Low Frequency Effects controls.

Only available when your TV is in Dolby Digital, DTS or MPEG

decode modes (see SOUND MODE) and receiving a dedicated LFE channel.

This adjusts the

contribution the LFE channel makes to your TV’s bass response.

Please Note: On broadcasts where there is no dedicated LFE channel, the

LFE VOLUME

option will

not be available in the A

UDIO

on-screen menu.

volume control

This control is used to increase, or decrease the sound from your TV's speakers. When exiting the

on-screen menu this will be the initial volume setting when the `TV is switched on.

Page is loading ...

Hitachi C43WP910TN User manual

Brand: Hitachi

Model: C43WP910TN

Category: AV receivers

Type: User manual

This manual is also suitable for

C55WP910TN

Download PDF

report

Hitachi C43WP910TN User manual

This manual is also suitable for

Hitachi C43WP910TN User manual

Related papers

Other documents