GSS HDTV 1001 T Assembly Instructions Manual

GSS
Brand
GSS
Model
HDTV 1001 T
Category
Modulator
Type
Assembly Instructions Manual

This manual is also suitable for

English
CLASS
KLASSE
HDTV 1000 T
HDTV 1001 T
Head-End Digital Modulator
HDTV / COFDM
GSS
Grundig SAT Systems GmbH
Beuthener Strasse 43
D-90471 Nuremberg
Phone: +49 (0) 911 / 703 8877
Fax: +49 (0) 911 / 703 9210
E-mail: [email protected]
Internet: http://www.gss.de
- 2 - HDTV 1000 T / HDTV 1001 T
Contents
1 Safety regulations and notes .....................................................................................4
2 General information .................................................................................................4
2.1 Packing contents ..........................................................................................4
2.2 Meaning of the symbols used ........................................................................5
2.3 Technical data .............................................................................................5
2.4 Description .................................................................................................6
2.4.1 Input signal path “INROUTE” ..............................................................7
Menu setting “A+ASI = 1 B+ASI = 2” ................................................7
Menu setting “A+B+ASI = 1 ASI = 2” ................................................7
Menu setting “A+ASI = 1 A+ASI = 2” ...............................................7
2.4.2 Output signal path “OUTROUTE” ........................................................8
Menu setting “ASI => ASI” .................................................................8
Menu setting “1 => ASI ASI => MA” .................................................8
Menu setting “2 => ASI ASI => MB” .................................................8
2.4.3 General ...........................................................................................9
2.5 Software query ............................................................................................9
2.6 How the TPS module works ...........................................................................9
3 Assembly ...............................................................................................................11
3.1 Installing the cassette ..................................................................................11
3.2 EMC regulations ........................................................................................11
3.3 Connecting the cassette ..............................................................................12
3.4 Retrofitting a CA module ............................................................................13
4 The control panel at a glance ..................................................................................14
4.1 Menu items ...............................................................................................14
4.2 Control panel ............................................................................................14
5 Programming .........................................................................................................15
5.1 Preparation ...............................................................................................15
5.2
Notes on level setting .................................................................................15
5.3 Programming procedure .............................................................................16
Channel strips “A” (without CA module) and “B” ...........................................16
Channel strip “A” with CA module ..............................................................19
5.4 Programming the cassette ..........................................................................20
Selecting the cassette .................................................................................20
Selecting the input signal path .....................................................................21
Selecting the output signal path ...................................................................21
Setting the ASI transfer rate .........................................................................21
Setting the ASI options ................................................................................. 22
Selecting the channel strip ..........................................................................23
Selecting channel / frequency setting ...........................................................23
Setting the output channel ...........................................................................24
Setting the output frequency ........................................................................24
Switching the modulator off or on ................................................................24
Adjusting the output levels of the channel strips .............................................25
- 3 - HDTV 1000 T / HDTV 1001 T
Setting the LNB oscillator frequency .............................................................25
Setting the input symbol rate .......................................................................26
Setting the DVB mode ................................................................................26
Setting the input frequency ..........................................................................27
Testing the signal to noise ratio ....................................................................27
Setting the station filter ...............................................................................28
COFDM parameters...................................................................................32
Setting the output signal
............................................................................... 35
Setting the transmission parameters ..............................................................36
Setting the transmitter identification ..............................................................37
Stuffing .....................................................................................................37
Setting a substitute signal in the case of an incorrect input signal .....................38
Setting the transport stream ID and the ORGNET-ID .......................................39
Network Information Table (NIT) ..................................................................39
Network/operator identification ..................................................................40
Deleting a PID ...........................................................................................41
Renaming a PID .........................................................................................41
Factory reset .............................................................................................42
Saving settings ..........................................................................................42
5.4.1 Operation with a CA module ............................................................43
Setting the scrambling ......................................................................43
Setting the PID monitoring ................................................................44
Configuring the CA module ..............................................................44
Setting the station filter .....................................................................45
6 Final procedures .....................................................................................................46
7 Channel and frequency tables .................................................................................47
- 4 - HDTV 1000 T / HDTV 1001 T
1 Safety regulations and notes
ÊUÊ ÃÃiLÞ]ÊÃÌ>>ÌÊ >`Ê ÃiÀÛV}ÊÃÕ`Ê LiÊV>ÀÀi`Ê ÕÌÊ LÞÊ>ÕÌÀÃi`Ê
iiVÌÀV>ð
Ê UÊ -ÜÌVÊvvÊÌiÊ«iÀ>Ì}ÊÛÌ>}iÊvÊÌiÊÃÞÃÌiÊLivÀiÊLi}}ÊÜÌÊ>ÃÃi-
LÞÊÀÊÃiÀÛViÊÜÀÊÀÊ«ÕÊÕÌÊÌiÊ>ÃÊ«Õ}°
Ê UÊ ÊÌÊ«iÀvÀÊÃÌ>>ÌÊ>`ÊÃiÀÛViÊÜÀÊ`ÕÀ}ÊÌÕ`iÀÃÌÀð
Ê UÊ ÃÌ>ÊÌiÊÃÞÃÌiÊÃÊÌÊÜÊÌÊLiÊ>LiÊÌÊÛLÀ>Ìio
Ê Ê Ê>Ê`ÕÃÌvÀii]Ê`ÀÞÊiÛÀiÌ
Ê Ê ÊÊÃÕVÊ>Ê>iÀÊÌ>ÌÊÌÊÃÊ«ÀÌiVÌi`ÊvÀÊÃÌÕÀi]ÊvÕiÃ]Êë>Ã}ÊÜ>-
ÌiÀÊ>`Ê`>«iÃÃ
Ê Ê ÃiÜiÀiÊ«ÀÌiVÌi`ÊvÀÊ`ÀiVÌÊÃÕ}Ì
Ê Ê ÌÊÜÌÊÌiÊi`>ÌiÊÛVÌÞÊvÊi>ÌÊÃÕÀViÃ
Ê Ê Ê>Ê>LiÌÊÌi«iÀ>ÌÕÀiÊvÊäÊcÊÌʳxäÊc°ÊÊV>ÃiÊvÊÌiÊvÀ>ÌÊvÊ
V`iÃ>ÌÊÜ>ÌÊÕÌÊÌiÊÃÞÃÌiÊÃÊV«iÌiÞÊ`Ài`°
Ê UÊ ÃÕÀiÊÌ>ÌÊÌiÊi>`i`ÊÃÌ>ÌÊÃÊ>`iµÕ>ÌiÞÊÛiÌ>Ìi`°ÊÊÌÊVÛiÀÊÌiÊ
ÛiÌ>ÌÊÃÌð
Ê UÊ iÜ>ÀiÊvÊÃÀÌÊVÀVÕÌÃÊ
Ê UÊ Ê>LÌÞÊÃÊ>VVi«Ìi`ÊvÀÊ>ÞÊ`>>}iÊV>ÕÃi`ÊLÞÊv>ÕÌÞÊViVÌÃÊÀÊ
>««À«À>ÌiÊ>`}°
Ê UÊ "LÃiÀÛiÊÌiÊÀiiÛ>ÌÊÃÌ>`>À`Ã]ÊÀi}Õ>ÌÃÊ>`Ê}Õ`iiÃÊÊÌiÊÃÌ>>-
ÌÊ>`Ê«iÀ>ÌÊvÊ>Ìi>ÊÃÞÃÌið
Ê UÊ /iÊ ÃÌ>`>À`ÃÊ É É Ê ÊxäänÎÊ >`Ê É É Ê ÊÈäÇÓnÊ ÕÃÌÊ
LiÊLÃiÀÛi`°
ÊU For further information please read the assembly instructions for the head-
end station used.
UÊ Test the software versions of the head-end station and the cassette and
update them if necessary. The current software versions can be found at
”www.gss.de”.
Ê/> i Ê>VÌÊÌÊ«ÀiÛiÌÊÃÌ>ÌVÊ`ÃV>À}iÊÜiÊÜÀ}ÊÊÌiÊ`iÛVi°
2 General information
2.1 Packing contents
Ê £Ê >ÃÃiÌÌiÊ/6Ê£äääÊ/ÊÀÊ/6Ê£ää£Ê/
Ê ÓÊ ÊV>LiÃ
Ê £Ê Ê>ÃÃiLÞÊÃÌÀÕVÌî
Ê £Ê ÀivÊ>ÃÃiLÞÊÃÌÀÕVÌÃ
- 5 - HDTV 1000 T / HDTV 1001 T
2.2 Meaning of the symbols used
Important note
—> General note
Ê UÊ Ê *iÀvÀ}ÊÜÀÃ
2.3 Technical data
The devices meet the following EU directives:
ÊÓääÈÉxÉ]ÊÓää{É£änÉ
The product fulfils the guidelines and standards for CE labelling.
Unless otherwise noted all values are specified as “typical”.
HF input
Frequency range: ......................................................... ÓxÊoÊÓ£xäÊâ
Level range: .............................................................ÈäÊ`6ÊoÊnäÊ`6
DVB-S modes: .............................................. QPSK
1
/
2
]Ê
2
/
3
]Ê
3
/
4
]Ê
5
/
6
]Ê
7
/
8
DVB-S2 modes: ......................QPSK
1
/
2
]Ê
3
/
5
]Ê
2
/
3
]Ê
3
/
4
]Ê
4
/
5
]Ê
5
/
6
]Ê
8
/
9
]Ê
9
/
10
...........................................................8PSK
3
/
5
]Ê
2
/
3
]Ê
3
/
4
]Ê
5
/
6
]Ê
8
/
9
]Ê
9
/
10
Symbol rate DVB-S: ...........................................+*-\ÊÊ ÓÊoÊ{xÊ-ÞLÉÃ
Symbol rate DVB-S2: ......................................... +*-\Ê£äÊoÊÎäÊ-ÞLÉÃ
....................................................................... n*-\Ê£äÊoÊΣÊ-ÞLÉÃ
COFDM modulator
Signal processing: ..........................................................DIN EN 300744
Transmission modes: ................................................................. Ó]Ê{]Ên
Types of modulation: ........................................ +*-]Ê£ÈÊ+]ÊÈ{Ê+
Code rates: ..............................................................
1
/
2
]Ê
2
/
3
]Ê
3
/
4
]Ê
5
/
6
]Ê
7
/
8
Guard intervals:............................................................
1
/
4
]Ê
1
/
8
]Ê
1
/
16
]Ê
1
/
32
HF output
Frequency range: ............................................... {Ó°äÊâÊoÊnÈä°äÊâÊ
Channels: ........................................................... xÊoÊ£Ó]ÊÓ£ÊoÊÈ
Types of modulation: ........................................ +*-]Ê£ÈÊ+]ÊÈ{Ê+
Output level: ............................................................................. 96 dBµV
Output impedance: ......................................................................... 75
- 6 - HDTV 1000 T / HDTV 1001 T
ASI interfaces
Standard: .....................................................................DIN EN 50083-9
Format: ................................................................MPEG ISO IEC 13818-1
User data rate: ................................................................. ÓÊoÊäÊLÌÉÃ
Level (input / output): ......................................................800 mV
PP
± 10%
Return loss (input): ............................................... Ê£ÇÊ`ÊxÊoÊÓÇäÊâ®
Connections
SAT inputs: ............................................................................. 2 F sockets
HF output: ........................................................................... 1 IEC socket
ASI input: .................................................................£Ê ÊÃViÌ]ÊÇxÊ
ASI output: ................................................................£Ê ÊÃViÌ]ÊÇxÊ
LAN: ................................................................................1 RJ-45 socket
Connection strip (10-pin): ...................for supply voltages and control circuits
RS-232 socket: ..................................... serial interface for software update
Common Interface: ................................ several channels can be decoded.
2.4 Description
Ê/iÊ`ÕLiÊÌÀ>Ã`Õ>ÌÀÊV>ÃÃiÌÌiÊÃÊ>ÊVÛiÀÌiÀ]ÊÜVÊVÛiÀÌÃÊ>ÊÃÌ>ÌÃÊ
modulated according to DVB-S /
DVB-S2
standard into two COFDM-modulated
signals according to DIN EN 300744 for feeding into a cable network.
The
cassette
has two digital SAT IF inputs and one HF output. Additionally it is
equipped with an ASI input and an ASI output (ASI – Asynchronous Serial
Interface acc. DIN EN 50083-9).
The transport stream fed via the ASI socket can be inserted into the transport
streams of the receiving stages via the TPS module.
T
he signal path is set in the
menu items input signal path
“INROUTE” and output signal path ”OUTROUTE”
.
- 7 - HDTV 1000 T / HDTV 1001 T
2.4.1 Input signal path “INROUTE”
Menu setting “A+ASI = 1 B+ASI = 2”
The transport streams of the receiving stage “TS A” and of the ASI input
“TS ASI” generate the transport stream 1. The transport streams of the receiv-
ing stage “TS B” and of the ASI input “TS ASI” generate the transport stream 2.
Transport)stream)1
Transport)stream)2
SAT)input))”A“
ASI)input)
SAT)input)”B“
Receiving)stage
"A"
Receiving)stage
"B"
TPSCA)module
TPS
TS))ASI
TS))A
TS))B
Menu setting “A+B+ASI = 1 ASI = 2”
The transport streams of the receiving stages “TS A” and “TS B” and of the ASI
input “TS ASI” generate the transport stream 1.
The
“TS ASI”
transport stream
fed via the ASI input generates the transport stream 2.
Transport)stream)1
ASI)input)
TPS
SAT)input))”A“
SAT)input))”B“
Receiving)stage
"A"
Receiving)stage
"B"
CA)module
Transport)stream)2
TS))B
TS))A
TS))ASI
Menu setting “A+ASI = 1 A+ASI = 2”
The transport streams of the receiving stage “A” “TS A” and of the ASI input
“TS ASI” are split into transport stream 1 and 2. Receiving stage “B” is not
used
.
TS##A
Transport#stream#1
Transport#stream#2
SAT#input##”A“
ASI#input##
Receiving#stage
"A"
TPS
CA#module
TPS
TS##ASI
- 8 - HDTV 1000 T / HDTV 1001 T
2.4.2 Output signal path “OUTROUTE”
Menu setting “ASI => ASI”
Transport stream 1 is made available via modulator “A»]ÊÌÀ>ëÀÌÊÃÌÀi>ÊÓÊÛ>Ê
modulator “B” and the transport stream from the ASI input “TS ASI” via the ASI
output.
Transport)stream)1
Transport)stream)2
HF)output
ASI)input
Modulator)
"B"
ASI)output
Modulator
"A"
Combiner
TS))ASI
Menu setting “1 => ASI ASI => MA”
Ê /À>ëÀÌÊÃÌÀi>Ê£ÊÃÊ>`iÊ>Û>>LiÊÛ>ÊÌiÊ-ÊÕÌ«ÕÌ]ÊÌÀ>ëÀÌÊÃÌÀi>ÊÓÊ
via modulator “B” and the transport stream from the ASI input “TS ASI” via
modulator “A” (MA).
Modulator)
"B"
Modulator
"A"
Combiner
TS))ASI
Transport)stream)1
ASI)input
Transport)stream)2
HF)output
ASI)output
Menu setting “2 => ASI ASI => MB”
Transport stream 1 is made available via modulator “A»] ÊÌÀ>ëÀÌÊÃÌÀi>ÊÓÊ
via the ASI output and the transport stream from the ASI input “TS ASI” via
modulator “B” (MB).
HF#output
ASI#output
Modulator#
"B"
Modulator
"A"
Combiner
TS##ASI
Transport#stream#1
ASI#input
Transport#stream#2
- 9 - HDTV 1000 T / HDTV 1001 T
2.4.3 General
The cassette is equipped with two channel strips (“
A
” and “
B
”). The channel
ÃÌÀ«ÃÊVÃÃÌÊvÊÌiÊ`}Ì>ÊÌÕiÀÃ]ÊÌiÊ`}Ì>ÊÃ}>Ê«Ài«>À>ÌÊÕÌÃÊ>`ÊÌiÊÕÌ-
put converter.
The channel strips are indicated in the head-end station display
with “Bx …A” and “Bx …B”. Using an adequate CA module encoded chan-
nels can be decoded via channel strip “A”. In addition cassette HDTV 1000 T
is able to encode uncoded channels via an adequate CA module. The control
of the cassette takes place via the control unit of the head-end station.
Two LEDs provide an indication of the SAT IF input signal quality based on
their colour and indicate if the respective channel strip is switched on (LED
illuminates) or off. Additionally the quality of the transport stream received is
displayed (“CN…”). The integrated TPS module (Transport Stream Processing)
processes the data of the transport streams.
The COFDM modulated HF output signals are sent through the HF output of the
cassette to the output collector. The common output level of the channel strips
can be set at the output collector. Additionally a transport stream is made
available via the ASI output dependent on the signal path set.
Ê7iÊÌiÊi>`i`ÊÃÌ>ÌÊÃÊÃÜÌVi`Ê]ÊÌiÊÌÜiÊÊ`ë>ÞÊÃÜÃÊÌiÊ
software version of the control unit. To operate this cassette the software ver-
sion of the control unit must be “V 41” or higher. You can find the current op-
iÀ>Ì}ÊÃvÌÜ>ÀiÊvÀÊÌiÊVÌÀÊÕÌÊ>`ÊÌiÊV>ÃÃiÌÌi]ÊÌiÊÃvÌÜ>ÀiʺBE-Flash”
and the current assembly instructions on the website “www.gss.de”.
The cassette is designed for use in the following head-end stations:
-/Ê£Óää]Ê-/ÊΣÈ]Ê-/,Ê£n and PST 19-1.
2.5 Software query
Control unit
ÊvÊ iViÃÃ>ÀÞ]ÊÞÕÊ V>Ê>VÌÛ>ÌiÊÌiÊ`V>ÌÊvÊ ÌiÊÃvÌÜ>ÀiÊÛiÀÃÊvÊ ÌiÊ
control unit manually:
Ê UÊ *ÀiÃÃÊ>ÞÊÌÜÊiÞÃÊÊÌiÊVÌÀÊÕÌÊvÊÌiÊi>`i`ÊÃÌ>ÌÊÃÕÌ>iÕÃÞÊ
ÕÌÊÌiÊ`ë>ÞÊ}iÃÊ`>ÀÊ>`ÊÌiÊÃvÌÜ>ÀiÊÛiÀÃ]Êi°}°ÊºV 41” appears.
2.6 How the TPS module works
Ê vÌiÀÊ `iV`}Ê +*-Ê ÀÊ n*-`Õ>Ìi`Ê Ã}>Ã]Ê ÌiÊ `i`Õ>Ìi`Ê `>Ì>Ê
streams and the data stream fed via the ASI socket can be accessed via the
Ìi}À>Ìi`Ê/*-Ê`Õi°Ê/iÃiÊ`>Ì>ÊÃÌÀi>Ã]Ê>ÃÊV>i`ÊÌÀ>ëÀÌÊÃÌÀi>Ã]ÊV-
Ì>ÊÃiÛiÀ>ÊÃÌ>ÌÃÊÊ>ÊÌiÀÊV«iÌÃÊÛ`i]Ê>Õ`]Ê`>Ì>Ê>`ÊÃiÀÛViÊ
vÀ>Ì®]ÊÜVÊV>ÊLiÊV>}i`ÊÕÃ}ÊÌiÊ/*-Ê`Õi°
- 10 - HDTV 1000 T / HDTV 1001 T
Station filter
Ê`Û`Õ>Ê ÃÌ>ÌÃÊ V>Ê LiÊ `iiÌi`°Ê /ÃÊ Ài`ÕViÃÊ ÌiÊ `>Ì>Ê À>ÌiÊ >`]Ê VÃi-
µÕiÌÞ]ÊÌiÊÕÌ«ÕÌÊÃÞLÊÀ>Ìi°Ê``Ì>ÞÊÃÌ>ÌÃÊvÊÌiÊ`vviÀiÌÊÌÀ>ëÀÌÊ
streams can be assembled to a new transport stream.
Stuffing
Ê/iÊÌÀ>ëÀÌÊÃÌÀi>ÊÃÊ«>``i`ÊÕÃ}ÊÜ>ÌÊÃÊÜÊ>ÃÊâiÀÊ`>Ì>°Ê/ÃÊiÃÕÀiÃÊ
a steady and constant output data rate.
Changing the Transport stream and ORGNET-ID
The transport stream ID can be changed. If the stations of a transponder are
ëÌÊÌÊÌiÊÌÀ>ëÀÌÊÃÌÀi>ÃÊvÊÌiÊV>iÊÃÌÀ«ÃÊ»»Ê>`Ê»»]ÊiÊvÊÌiÊLÌÊ
transport streams a new identification must be allocated to realise the channel
search of the settop boxes connected without mistakes.
If the ORGNET-ID is changed a new NIT must be generated.
Changing the NIT
The transport stream contains data in the form of tables which the receiv-
ers evaluate and require for convenient use. The TPS module can adjust the
“Network Information Table” (NIT) to accommodate the new station data. The
“NIT” contains data which is required by the set-top boxes connected to the
cable network for the automatic search feature.
Changing the operator ID (CAT)
Some network operators transmit an operator ID in the data stream (e.g.
visAvision). By changing the CAT the operator ID can be adjusted to the cur-
rent demands.
- 11 - HDTV 1000 T / HDTV 1001 T
3 Assembly
3.1 Installing the cassette
– Ensure the head-end station is mounted so it will not be able to vibrate.
Û`]ÊvÀÊiÝ>«i]ÊÕÌ}ÊÌiÊi>`i`ÊÃÌ>ÌÊÌÊ>ÊvÌÊÃ>vÌÊÀÊ>ÞÊ
other wall or floor construction that vibrates in a similar way.
– Before installing or changing a cassette unplug the power cable from the
mains power socket.
Ê UÊ ,iÛiÊÌiÊv>ÃÌi}ÊÃVÀiÜÃÊ1 of an unoccupied slot from the bracket of
the head-end station.
Ê UÊ ÃiÀÌÊÌiÊV>ÃÃiÌÌiÊÊÌÃÊÃÌÊ>`Ê«ÕÃÊÌÊÌÊÌiÊÕÃ}°
Ê UÊ }ÊÌiÊV>ÃÃiÌÌiÊ>`Ê>««ÞÊÃ}ÌÊ«ÀiÃÃÕÀiÊÌÊViVÌÊÌÊÌÊÌiÊViVÌÃÊ
of the board and the HF bus bar.
Ê UÊ >ÃÌiÊÌiÊV>ÃÃiÌÌiÊÜÌÊÌiÊÃVÀiÜÃÊ1.
0°
KASSETTE
KASSETTE
KASSETTE
KASSETTE
KASSETTE
KASSETTE
KASSETTE
KASSETTE
KASSETTE
KASSETTE
KASSETTE
KASSETTE
HYBRID,VERSTÄRKER
MESSAUSGANG
–20 dBµV
AUSGANG
max. 106 dBµV
ACHTUNG!
Vor dem Kassettenwechsel
unbedingt
denNetzstecker ziehen.
CAUTION!
Before
changing cassettes remove
mains plug.
Grundig(SAT(Systems
3.2 EMC regulations
To comply with the current EMC regulations, it is necessary to connect the lines
leading in and out of the head-end station using cable terminals.
When mounting the cassette in a STR 19-8 or PST 19-1 head-end station which
is installed in a 19” cabinet, make sure the connections leading in and out for
the 19” cabinet are made using cable terminals.
CLASS
KLASSE
The attenuation of shielding of the connection lines for ASI and antenna must
meet the requirements for “Class A”.
- 12 - HDTV 1000 T / HDTV 1001 T
Ê UÊ ÃiÀÌÊÌiÊÀiµÕÀi`ÊÕLiÀÊvÊV>LiÊÌiÀ>ÃÊÊÌiÊ«i}ÃÊ«ÀÛ`i`ÊÊ
the head-end station or in the 19
”
cabinet.
—> cable terminals are not included in the scope of delivery.
Tighten the nuts of the cable terminals until the teeth on the lock washers
put un-
der
have penetrated the exterior coating and a good connection is made between
the housing
/ 19” cabinet
and cable terminals.
3.3 Connecting the cassette
RS#232
7
Slot)for)a
CA)module
6
LAN
3
ASI)output
5
SAT)input)"A"
2
ASI)input
4
SAT)input)"B"
1
Ê UÊ
Connect “
SAT input A
” 2 (channel strip “A”) and “
SAT input B
” 1 (channel
strip “B”) to the respective outputs of the SAT IF input distributors.
Ê UÊ iVÌÊÌiÊ-ÊÃViÌÃÊ4 and 5.
—> The LAN socket
3
is intended for additional functions.
ÊU
Connect the head-end station to the mains power supply.
Slot for a CA module 6
D-SUB socket “RS-232“ 7
The operating software of the cassette can be updated via the 9-Pin D-SUB
socket “RS-232” using a PC or notebook and the software “BE-Flash”.
You can find the current operating software on the website “www.gss.de”.
- 13 - HDTV 1000 T / HDTV 1001 T
3.4 Retrofitting a CA module
The cassette is equipped with a common interface. It allows you to connect
a CA module for various encryption systems and service providers. Encoded
channels can only be decoded with a CA module suitable for the encoding
system and the corresponding smart card. The smart card contains all the in-
vÀ>ÌÊvÀÊ>ÕÌÀÃ>Ì]Ê`iV`}Ê>`ÊÃÕLÃVÀ«Ì°
Caution
– Check with the distributor or manufacturer of the CA module to be used
to ensure that it is suitable for decoding several channels.
– The hardware and software of this cassette have been thoroughly prepared
and tested.
– Any changes made by programme provider to the structures in the pro-
gramme data might impair or even prevent this function.
Ê qÊ 7iÊÜÀ}ÊÜÌÊÌiÊÊ`Õi]Ê«i>ÃiÊÀi>`ÊÌiÊVÀÀië`}Ê«iÀ>Ì-
ing manual from the respective provider.
Ê UÊ ÃiÀÌÊÌiÊÃ>ÀÌÊV>À`
into the CA module
so that the chip
on the smart card
faces the thicker side (top) of the CA module.
Ê UÊ ÃiÀÌÊÌiÊÊ`ÕiÊÌÊÌiÊÃÌ
6 (see chap. 3.3) with the top side of the
CA module facing the top side of the cassette.
Ê UÊ *ÕÃÊÌiÊÊ`ÕiÊÜÌÕÌÊV>Ì}ÊÌÊÌiÊ}Õ`iÊÀ>ÃÊvÊÌiÊÊÃÌÊ6
and contact it to the common interface.
- 14 - HDTV 1000 T / HDTV 1001 T
4 The control panel at a glance
4.1 Menu items
Programme the
cassette
using the buttons on the control unit of the head-end
station. The two-line display of the control unit then shows the menus.
The parameters and functions to be set are underlined.
Use the key to select the following main menu items:
– Input signal path
– Output signal path
– Channel strip
– Channel / frequency setting
– Output channel / output frequency
– Output level
– LNB oscillator frequency
– Input symbol rate
– Input frequency
– Station filter
– CA module (if available)
– Output signal
– Transmission parameters
– Station identification
– Stuffing
– Substitute signal
– Transport stream and ORGNET-ID
– Network Information Table (NIT)
–
Network/operator identification
– Deleting a PID
– Renaming a PID
– Factory reset
4.2 Control panel
The key pad on the head-end station is used to scroll through the menus step-by-step:
scrolls forward through the menus.
select parameters in the menus.
ÃiÌÊÛ>ÕiÃ]ÊÌ>ÌiÊ>VÌð
selects sub-menus.
scrolls backward through the menus.
saves all entries.
BE-Remote
V41
please wait . . .
- 15 - HDTV 1000 T / HDTV 1001 T
5 Programming
5.1 Preparation
ÊU Test the software versions of the head-end station and the cassette and up-
date them if necessary.
The current software versions can be found on the website
”
www.gss.de
”
.
Ê UÊ iVÌÊÌiÊÌiÃÌÊÀiViÛiÀÊÌÊÌiÊÊÕÌ«ÕÌÊÀÊÌiÊÌiÃÌÊÕÌ«ÕÌÊvÊÌiÊi>`i`Ê
station.
Ê UÊ -iÌÊÌiÊÕÌ«ÕÌÊV>iÊÉÊÕÌ«ÕÌÊvÀiµÕiVÞÊvÊÌiÊ
cassette
(page 23) and
adjust the TV test receiver to this channel / frequency.
Ê UÊ
Switch on the channel strip (modulator) if necessary (
page
24). For each
V>iÊÃÌÀ«]ÊÌiÀiÊÃÊ >Ê ÃÌ>ÌÕÃÊ Ê ÜVÊ`V>ÌiÃÊ vÊ ÌiÊ V>iÊ ÃÌÀ«ÊÃÊ
switched on.
Status&LED&
Channel&strip
"B"
Status&LED&
Channel&strip
"A"
Ê UÊ >>ViÊÌiÊÕÌ«ÕÌÊiÛiÃÊvÊÌiÊV>iÊÃÌÀ«ÃʺA” and “B” if the difference
in level is 1 dB (page 25).
5.2
Notes on level setting
In order to prevent interference within the head-end station and the cable sys-
Ìi]ÊÌiÊÕÌ«ÕÌÊiÛiÊvÊÌiÊV>ÃÃiÌÌiÊÕÃÌÊLiÊ`iVÀi>Ãi`ÊLÞÊnÊ`ÊV«>Ài`ÊÌÊ
analogue cassettes.
- 16 - HDTV 1000 T / HDTV 1001 T
5.3 Programming procedure
Channel strips “A” (without CA module) and “B”
!"#$%
&'())*+
,-./-.
&'())*+#0#12*34
!"#$%
56747789:
,-./-.
;)
;)#0#;<<
Å
Ï
0
!"#$
=>)*#%#?@#
=ABC
@D#=>)*#!
=>)*#%#/"=>)*#!
B
!CEF*G;H*
I+*(J*#K(>H#L
M#$N
!;"#$
M#NO#
PM!QOR./8
&,1P8#E#E#E
S
H#D#N7#J
!"#$
%S!S%QA@N#
ABF,-.C
%QA@O
%S%QA@N# !S%QA@O
%S!S%QA@N# %QA@O
%S%QA@N# %S%QA@O
N@D%QA# %QA@D8%
O@D%QA# %QA@D8!
%QA@D%QA
A
!"#$
N@D%QA#
,-.F,-.C
%QA@D8%
!"#$
N75777#T!>HJ#
%QA#F%.C
N55#0#O7$
I;J>H>U#0#)*V(H>UW#positive(/(negativ*
X;)H>)Y>*2+>Z'#0#[Y2JHW
continuous(/(burst
!"#$
N55# I;J4# Z;)H4#
%QA#,/.A,B
Å
Ï
0
Å
Ï
0
Ï
Å
Ï
0
C>)#0#,)
8
8
8
8
8
8
8
Box$1
..............
$..............
$..............
Bx#1A
C5(12,S3(24
TWIN(SAT
C07
Böx#4
C5(12,S3(24
TWIN(SAT
C07
Box#5
..............
#..............
#..............
Page 18
Page 18
- 17 - HDTV 1000 T / HDTV 1001 T
Bx 4A
Channel
OUTPUT
Channel / Freq.
Bx 4A
850.00MHz
OUTPUT
on
Bx 4A
27500
SYMBOL
DVB-S
Bx 4A
11836 -1.8
FREQ
CN 12
▶
◀
/
▶
◀
/
▶
◀
/
on / off
▶
◀
/
Bx 4A
-3 dB
LEVEL
Bx 4A
10600 MHz
LNB
0 … -10 dB
Bx 4A
12.0 dB
C/N
(+ 9.6) OK
Anzeige: Signalqualität
Display: Signal quality
▶
◀
/
DVB-S / DVB-S 2 …
Bx 4A
Filter
PROGRAM
off
01/10Bx 4A TV +
Das Erste
Programme entfernen / hinzufügen
Removing / activating stations
nächster Service (Programm)
next service (station)
▶
◀
/
▶
◀
/
02/19Bx 4B TV +
SWF3
Programme entfernen / hinzufügen
Removing / activating stations
nächster Service (Programm)
next service (station)
01/10ASI TV +
. . . . .
Programme entfernen / hinzufügen
Removing / activating stations
nächster Service (Programm)
next service (station)
on -> off
Bx 4A
8MHz QAM64
COFDM-MODE
POS
▶
◀
/
5…8MHz
QPSK…QAM64
positiv / negativ
positive / negative
Bx 4A
8k C7/8
COFDM-MODE
G1/32
▶
◀
/
2 … 8k
C1/2 … C7/8
G1/4 … G 1/32
Bx 4A
CELL 0x0000
COFDM TPS
off
▶
◀
/
0x0000 … 0xFFFF
on / off
C
D
Kanalzug “A” mit CA-Modul
Channel strip “A“ with CA module
Kanalzug “A” ohne
CA-Modul,
Kanalzug “B” /
Channel strip “A“
without CA module,
Channel strip “B“
Bx 4A
34363 (32502)
STUFFING
Bx 4A
Null Packets
FAILURE
Null Packets … Single Carrier
Bx 4A
off
NIT
=> Make
▶
on / off Make
Bx 4A
PID 0x0000
DROP
off
Bx 4A
0xDE00
CAT-ID
off
▶
◀
/
Bx 4A
0x0000 –> 0000
REMAP
off
▶
◀
/
on / off
▶
◀
/
on / off
▶
◀
/
▶
◀
/
on / off
▶
◀
/
Bx 4
Line A <=
LINE
=> Line B
Line A / Line B
B
BE–Remote
please wait …
V 41
Box 4
V 12
DVBS2-TPM
COFDM – – –
+
t > 10 s
Bx 4
A+B+ASI=1
INROUTE
ASI=2
A+ASI=1 B+ASI=2
A+B+ASI=1 ASI=2
A+ASI=1 A+ASI=2
1=>ASI ASI=>MA
2=>ASI ASI=>MB
ASI=>ASI
A
Bx 4
1=>ASI
OUTROUTE
ASI=>MA
Bx 4
108000 KBits
ASI RATE
188 / 204
positiv / negativ, positive / negative
kontinuierlich / burst,
continuous / burst
Bx 4
188 pos. cont.
ASI OPTION
▶
◀
/
▶
◀
/
◀
▶
◀
/
▶
◀
/
AUDIO
AUDIO
Ein / On
M
M
M
M
M
M
M
M
M
B
A
▶
Bx 4A
Defaults
FACTORY
=>
Bx 4A
STORE
FACTORY
=> M
auf Werkseinstellung
zurücksetzen und speichern
reset to factory defaults
and store
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
▶
Box 1
..............
..............
..............
Bx 1A
C5-12,S3-24
TWIN-SAT
C07
Böx 4
C5-12,S3-24
TWIN-SAT
C07
Box 5
..............
..............
..............
▶
◀
/
Bx 4A
0x0001,0100
TS/ONID
off
▶
◀
/
off / on
Page 19
- 18 - HDTV 1000 T / HDTV 1001 T
Bx 4A
Channel
OUTPUT
Channel / Freq.
Bx 4A
850.00MHz
OUTPUT
on
Bx 4A
27500
SYMBOL
DVB-S
Bx 4A
11836 -1.8
FREQ
CN 12
▶
◀
/
▶
◀
/
▶
◀
/
on / off
▶
◀
/
Bx 4A
-3 dB
LEVEL
Bx 4A
10600 MHz
LNB
0 … -10 dB
Bx 4A
12.0 dB
C/N
(+ 9.6) OK
Anzeige: Signalqualität
Display: Signal quality
▶
◀
/
DVB-S / DVB-S 2 …
Bx 4A
Filter
PROGRAM
off
01/10Bx 4A TV +
Das Erste
Programme entfernen / hinzufügen
Removing / activating stations
nächster Service (Programm)
next service (station)
▶
◀
/
▶
◀
/
02/19Bx 4B TV +
SWF3
Programme entfernen / hinzufügen
Removing / activating stations
nächster Service (Programm)
next service (station)
01/10ASI TV +
. . . . .
Programme entfernen / hinzufügen
Removing / activating stations
nächster Service (Programm)
next service (station)
on -> off
Bx 4A
8MHz QAM64
COFDM-MODE
POS
▶
◀
/
5…8MHz
QPSK…QAM64
positiv / negativ
positive / negative
Bx 4A
8k C7/8
COFDM-MODE
G1/32
▶
◀
/
2 … 8k
C1/2 … C7/8
G1/4 … G 1/32
Bx 4A
CELL 0x0000
COFDM TPS
off
▶
◀
/
0x0000 … 0xFFFF
on / off
C
D
Kanalzug “A” mit CA-Modul
Channel strip “A“ with CA module
Kanalzug “A” ohne
CA-Modul,
Kanalzug “B” /
Channel strip “A“
without CA module,
Channel strip “B“
Bx 4A
34363 (32502)
STUFFING
Bx 4A
Null Packets
FAILURE
Null Packets … Single Carrier
Bx 4A
off
NIT
=> Make
▶
on / off Make
Bx 4A
PID 0x0000
DROP
off
Bx 4A
0xDE00
CAT-ID
off
▶
◀
/
Bx 4A
0x0000 –> 0000
REMAP
off
▶
◀
/
on / off
▶
◀
/
on / off
▶
◀
/
▶
◀
/
on / off
▶
◀
/
Bx 4
Line A <=
LINE
=> Line B
Line A / Line B
B
BE–Remote
please wait …
V 41
Box 4
V 12
DVBS2-TPM
COFDM – – –
+
t > 10 s
Bx 4
A+B+ASI=1
INROUTE
ASI=2
A+ASI=1 B+ASI=2
A+B+ASI=1 ASI=2
A+ASI=1 A+ASI=2
1=>ASI ASI=>MA
2=>ASI ASI=>MB
ASI=>ASI
A
Bx 4
1=>ASI
OUTROUTE
ASI=>MA
Bx 4
108000 KBits
ASI RATE
188 / 204
positiv / negativ, positive / negative
kontinuierlich / burst,
continuous / burst
Bx 4
188 pos. cont.
ASI OPTION
▶
◀
/
▶
◀
/
◀
▶
◀
/
▶
◀
/
AUDIO
AUDIO
Ein / On
M
M
M
M
M
M
M
M
M
B
A
▶
Bx 4A
Defaults
FACTORY
=>
Bx 4A
STORE
FACTORY
=> M
auf Werkseinstellung
zurücksetzen und speichern
reset to factory defaults
and store
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
▶
Box 1
..............
..............
..............
Bx 1A
C5-12,S3-24
TWIN-SAT
C07
Böx 4
C5-12,S3-24
TWIN-SAT
C07
Box 5
..............
..............
..............
▶
◀
/
Bx 4A
0x0001,0100
TS/ONID
off
▶
◀
/
off / on
Page 16
- 19 - HDTV 1000 T / HDTV 1001 T
Channel strip “A” with CA module
Bx#4A
Menu#<=#
CA
=>#Edit
*)# Die#angezeigte#Information#ist#
# abhängig#vom#verwendeten
# CA:Modul.#
! The!information!displayed!is!
! dependent!on!the!CA!module
! used.
Bx#4A# 01/03
Information#*)
MENU#
Bx#4A# TV# X
.#.#.#.##
04/09
X#–# entschlüsseln##
!! descrambling
0# –# nicht#entschlüsseln
!! no!descrambling
X#/#0#
nächster#Service
next!service
Bx#4A
PID#Check
CA
on
Å
Ï
on#/#off
M
Å
Ï
/
D
Bx#4A
scramble
CA
####
scramble#/#descramble
C
scramble
descramble
Page 17
Page 17
(only HDTV 1001 T)
- 20 - HDTV 1000 T / HDTV 1001 T
5.4 Programming the cassette
—> Pressing the
button for longer than 2 seconds cancels the pro-
gramming procedure. This takes you back to the programme item “Select-
ing the cassette” from any menu. Any entries that have not been saved
are reset to the previous settings.
—> Entries in the menus can be saved by pressing the key. You are taken
back to the “Selecting the cassette” menu item.
Ê UÊ -ÜÌVÊÊÌiÊi>`i`ÊÃÌ>Ì
—> The display shows the software version (e.g. V 41)
—> The processor reads the
cassettes
‘ data (approx. 10 seconds).
BE–Remote
please wait …
V 41
t > 10 s
Ein / On
Selecting the cassette
B
o
x
1
.
............
.
.............
Bo
x
5
..............
..............
..............
+
Box 4
V 12
DVBS2-TPM
COFDM – – –
Ê UÊ -iiVÌÊÌiÊ
cassette
you want to programme (e.g. Box 4) by repeatedly press-
ing the button if necessary.
—> The display shows e.g. the menu
“Box 4 DVBS2-TPM“
:
“Box 4” stands for
slot
4
”DVBS2-TPM” Type of cassette
”V 12” Software version of the cassette
Ê UÊ *ÀiÃÃÊÌiÊ button.
—> The “Selecting the input signal path” – “INROUTE” menu is activated.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

GSS HDTV 1001 T Assembly Instructions Manual

GSS
Brand
GSS
Model
HDTV 1001 T
Category
Modulator
Type
Assembly Instructions Manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents