GSS HDTV 1001 C Assembly Instructions Manual

GSS
Brand
GSS
Model
HDTV 1001 C
Type
Assembly Instructions Manual

This manual is also suitable for

English
CLASS
KLASSE
HDTV 1000 ASI LAN
HDTV 1001 C
Head-End Digital Modulator HDTV
GSS
Grundig SAT Systems GmbH
Beuthener Strasse 43
D-90471 Nuremberg
Phone: +49 (0) 911 / 703 8877
Fax: +49 (0) 911 / 703 9210
E-mail: [email protected]
Internet: http://www.gss.de
- 2 - HDTV 1000 ASI LAN / HDTV 1001 C
Contents
1 Safety regulations .....................................................................................................4
2 General information .................................................................................................4
2.1 Packing contents ..........................................................................................4
2.2 Meaning of the symbols used ........................................................................5
2.3 Technical data .............................................................................................5
2.4 Description .................................................................................................6
2.4.1 Input signal path “INROUTE” ..............................................................6
Menu setting “A+ASI = 1 B+ASI = 2” ................................................6
Menu setting “A+B+ASI = 1 ASI = 2” ................................................6
Menu setting “A+ASI = 1 A+ASI = 2” ...............................................7
2.4.2 Output signal path “OUTROUTE” ........................................................7
Menu setting “ASI => ASI” .................................................................7
Menu setting “1 => ASI ASI => MA” .................................................7
Menu setting “2 => ASI ASI => MB” .................................................8
2.4.3 General ...........................................................................................8
2.6 How the TPS module works ...........................................................................9
2.7 Explanation of the term “symbol rate” ..........................................................10
3 Assembly ...............................................................................................................11
3.1 Installing the cassette ..................................................................................11
3.2 EMC regulations ........................................................................................11
3.3 Connecting the cassette ..............................................................................12
3.4 Retrofitting a CA module ............................................................................13
4 The control panel at a glance ..................................................................................14
4.1 Menu items ...............................................................................................14
4.2 Control panel ............................................................................................14
5 Programming .........................................................................................................15
5.1 Preparation ...............................................................................................15
5.2
Notes on level setting .................................................................................15
5.3 Programming procedure .............................................................................16
Channel strips “A” (without CA module) and “B” ...........................................16
Channel strip “A” with CA module ..............................................................19
5.4 Programming the cassette ..........................................................................20
Selecting the cassette .................................................................................20
Selecting the input signal path .....................................................................21
Selecting the output signal path ...................................................................21
Setting the ASI transfer rate .........................................................................22
Setting the ASI options ...............................................................................22
Selecting the channel strip ..........................................................................23
Selecting channel / frequen cy setting ...........................................................23
Setting the output channel ...........................................................................24
Setting the output frequency ........................................................................24
Switching the modulator off or on ................................................................25
Adjusting the output levels of the channel strips .............................................25
- 3 - HDTV 1000 ASI LAN / HDTV 1001 C
Setting the LNB oscillator frequency .............................................................26
Setting the input symbol rate .......................................................................26
Setting the DVB mode ................................................................................27
Setting the input frequency ..........................................................................27
Testing the signal to noise ratio ....................................................................28
Setting the station filter ...............................................................................29
Setting the QAM modulation
........................................................................ 32
Inverting the user signal ..............................................................................33
Setting stuffing ...........................................................................................33
Setting a substitute signal in the case of an incorrect input signal ....................34
Setting the transport stream ID and the ORGNET-ID .......................................35
Network Information Table (NIT) ..................................................................35
Network/operator identification ..................................................................36
Deleting a PID ...........................................................................................37
Renaming a PID .........................................................................................37
Factory reset .............................................................................................38
Saving settings ..........................................................................................38
5.4.1 Operation with a CA module ............................................................39
Setting the scrambling ......................................................................39
Setting the PID monitoring ................................................................40
Configuring the CA module ..............................................................40
Setting the station filter .....................................................................41
6 Final procedures .....................................................................................................43
7 Channel and frequency tables .................................................................................44
- 4 - HDTV 1000 ASI LAN / HDTV 1001 C
1 Safety regulations
Caution
Ê UÊ ÃÃiLÞ]Ê ÃÌ>>ÌÊ >`Ê ÃiÀÛV}ÊÃÕ`Ê LiÊ V>ÀÀi`Ê ÕÌÊ LÞÊ>ÕÌÀÃi`Ê
iiVÌÀV>ð
Ê UÊ -ÜÌVÊvvÊÌiÊ«iÀ>Ì}ÊÛÌ>}iÊvÊÌiÊÃÞÃÌiÊLivÀiÊLi}}ÊÜÌÊ>ÃÃi-
LÞÊÀÊÃiÀÛViÊÜÀÊÀÊ«ÕÊÕÌÊÌiÊ>ÃÊ«Õ}°
Ê UÊ ÊÌÊ«iÀvÀÊÃÌ>>ÌÊ>`ÊÃiÀÛViÊÜÀÊ`ÕÀ}ÊÌÕ`iÀÃÌÀð
Ê UÊ ÃÌ>ÊÌiÊÃÞÃÌiÊÃÊÌÊÜÊÌÊLiÊ>LiÊÌÊÛLÀ>Ìio
Ê Ê Ê>Ê`ÕÃÌvÀii]Ê`ÀÞÊiÛÀiÌ
-
ÊÊÊÃÕVÊ>Ê>iÀÊÌ>ÌÊÌÊÃÊ«ÀÌiVÌi`ÊvÀÊÃÌÕÀi]ÊvÕiÃ]Êë>Ã}ÊÜ>ÌiÀÊ>`Ê
`>«iÃÃ
Ê Ê ÃiÜiÀiÊ«ÀÌiVÌi`ÊvÀÊ`ÀiVÌÊÃÕ}Ì
Ê Ê ÌÊÜÌÊÌiÊi`>ÌiÊÛVÌÞÊvÊi>ÌÊÃÕÀViÃ
Ê Ê Ê>Ê>LiÌÊÌi«iÀ>ÌÕÀiÊvÊäÊcÊÌʳxäÊc°ÊÊV>ÃiÊvÊÌiÊvÀ>ÌÊvÊ
V`iÃ>ÌÊÜ>ÌÊÕÌÊÌiÊÃÞÃÌiÊÃÊV«iÌiÞÊ`Ài`°
Ê UÊ ÃÕÀiÊÌ>ÌÊÌiÊi>`i`ÊÃÌ>ÌÊÃÊ>`iµÕ>ÌiÞÊÛiÌ>Ìi`°Ê
ÊÊÊÌÊVÛiÀÊÌiÊÛiÌ>ÌÊÃÌð
Ê UÊ iÜ>ÀiÊvÊÃÀÌÊVÀVÕÌÃÊ
Ê UÊ Ê>LÌÞÊÃÊ>VVi«Ìi`ÊvÀÊ>ÞÊ`>>}iÊV>ÕÃi`ÊLÞÊv>ÕÌÞÊViVÌÃÊÀÊ
>««À«À>ÌiÊ>`}°
Ê UÊ "LÃiÀÛiÊÌiÊÀiiÛ>ÌÊÃÌ>`>À`Ã]ÊÀi}Õ>ÌÃÊ>`Ê}Õ`iiÃÊÊÌiÊÃÌ>>ÌÊ>`Ê
«iÀ>ÌÊvÊ>Ìi>ÊÃÞÃÌið
Ê UÊ /iÊ ÃÌ>`>À`ÃÊÉ É Ê ÊxäänÎÊ >`Ê É É Ê ÊÈäÇÓnÊ ÕÃÌÊ LiÊ
LÃiÀÛi`°
ÊU For further information please read the assembly instructions for the head-
end station used.
Take action to prevent static discharge when working on the device.
2 General information
2.1 Packing contents
Ê £Ê >ÃÃiÌÌiÊ/6Ê£äääÊ-Ê ÊÀÊ/6Ê£ää£Ê
Ê ÓÊ ÊV>LiÃ
Ê £Ê Ê>ÃÃiLÞÊÃÌÀÕVÌî
Ê £Ê ÀivÊ>ÃÃiLÞÊÃÌÀÕVÌÃ
- 5 - HDTV 1000 ASI LAN / HDTV 1001 C
2.2 Meaning of the symbols used
Important note
—> General note
Ê UÊ Ê *iÀvÀ}ÊÜÀÃ
2.3 Technical data
The devices meet the following EU directives:
ÊÓääÈÉxÉ]ÊÓää{É£änÉ
The product fulfils the guidelines and standards for CE labelling.
Unless otherwise noted all values are specified as “typical”.
HF input
Frequency range: ......................................................... ÓxÊoÊÓ£xäÊâ
Level range: .............................................................ÈäÊ`6ÊoÊnäÊ`6
DVB-S modes: ..............................................DVB-S
1
/
2
]Ê
2
/
3
]Ê
3
/
4
]Ê
5
/
6
]Ê
7
/
8
DVB-S2 modes: ......................QPSK
1
/
2
]Ê
3
/
5
]Ê
2
/
3
]Ê
3
/
4
]Ê
4
/
5
]Ê
5
/
6
]Ê
8
/
9
]Ê
9
/
10
8PSK
3
/
5
]Ê
2
/
3
]Ê
3
/
4
]Ê
5
/
6
]Ê
8
/
9
]Ê
9
/
10
Symbol rate DVB-S: ...........................................+*-\ÊÊ ÓÊoÊ{xÊ-ÞLÉÃ
Symbol rate DVB-S2: .........................................+*-\Ê£äÊoÊÎäÊ-ÞLÉÃ
Ê n*-\Ê£äÊoÊΣÊ-ÞLÉÃ
HF output
Channels: .............................................................................-Ó£ÊoÊÈ
Frequency range: ............................................... {Ó°äÊâÊoÊnÈä°äÊâÊ
Output level: ............................................................................. 97 dBµV
Output impedance: ......................................................................... 75
Connections
SAT inputs: ............................................................................. 2 F sockets
HF output: ............................................................................ 1 IEC socket
ASI input: .................................................................£Ê ÊÃViÌ]ÊÇxÊ
ASI output: ................................................................£Ê ÊÃViÌ]ÊÇxÊ
Connection strip (10-pin): ...................for supply voltages and control circuits
RS-232 socket: ..................................... serial interface for software update
Conditional access: ................................ several channels can be decoded.
- 6 - HDTV 1000 ASI LAN / HDTV 1001 C
2.4 Description
Ê/iÊ`ÕLiÊÌÀ>Ã`Õ>ÌÀÊV>ÃÃiÌÌiÊÃÊ>Ê+*-VÛiÀÌiÀ]ÊÜVÊVÛiÀÌÃÊ>Ê
stations modulated according to DVB-S /
DVB-S2
standard into two QAM-
modulated cable signals.
The
cassette
has two digital SAT IF inputs and one HF
output. Additionally it is equipped with an ASI input and an ASI output (ASI –
Asynchronous Serial Interface acc. DIN EN 50083-9).
The transport stream fed via the ASI socket can be inserted into the transport
streams of the receiving stages via the TPS module.
T
he signal path is set in the
menu items input signal path
“INROUTE” and output signal path ”OUTROUTE”
.
2.4.1 Input signal path “INROUTE”
Menu setting “A+ASI = 1 B+ASI = 2”
The transport streams of the receiving stage “TS A” and of the ASI input
“TS ASI” generate the transport stream 1. The transport streams of the receiv-
ing stage “TS B” and of the ASI input “TS ASI” generate the transport stream 2.
Transport)stream)1
Transport)stream)2
SAT)input))”A“
ASI)input)
SAT)input)”B“
Receiving)stage
"A"
Receiving)stage
"B"
TPSCA)module
TPS
TS))ASI
TS))A
TS))B
Menu setting “A+B+ASI = 1 ASI = 2”
The transport streams of the receiving stages “TS A” and “TS B” and of the ASI
input “TS ASI” generate the transport stream 1.
The
“TS ASI”
transport stream
fed via the ASI input generates the transport stream 2.
Transport)stream)1
ASI)input)
TPS
SAT)input))”A“
SAT)input))”B“
Receiving)stage
"A"
Receiving)stage
"B"
CA)module
Transport)stream)2
TS))B
TS))A
TS))ASI
- 7 - HDTV 1000 ASI LAN / HDTV 1001 C
Menu setting “A+ASI = 1 A+ASI = 2”
The transport streams of the receiving stage “A” “TS A” and of the ASI input
“TS ASI” are split into transport stream 1 and 2. Receiving stage “B” is not
used
.
TS##A
Transport#stream#1
Transport#stream#2
SAT#input##”A“
ASI#input##
Receiving#stage
"A"
TPS
CA#module
TPS
TS##ASI
2.4.2 Output signal path “OUTROUTE”
Menu setting “ASI => ASI”
Transport stream 1 is made available via modulator “A»] ÊÌÀ>ëÀÌÊÃÌÀi>ÊÓÊÛ>Ê
modulator “B” and the transport stream from the ASI input “TS ASI” via the ASI
output.
Transport)stream)1
Transport)stream)2
HF)output
ASI)input
Modulator)
"B"
ASI)output
Modulator
"A"
Combiner
TS))ASI
Menu setting “1 => ASI ASI => MA”
Ê /À>ëÀÌÊÃÌÀi>Ê£ÊÃÊ>`iÊ>Û>>LiÊÛ>ÊÌiÊ-ÊÕÌ«ÕÌ]ÊÌÀ>ëÀÌÊÃÌÀi>ÊÓÊ
via modulator “B” and the transport stream from the ASI input “TS ASI” via
modulator “A” (MA).
Modulator)
"B"
Modulator
"A"
Combiner
TS))ASI
Transport)stream)1
ASI)input
Transport)stream)2
HF)output
ASI)output
- 8 - HDTV 1000 ASI LAN / HDTV 1001 C
Menu setting “2 => ASI ASI => MB”
Transport stream 1 is made available via modulator “A»] ÊÌÀ>ëÀÌÊÃÌÀi>ÊÓÊ
via the ASI output and the transport stream from the ASI input “TS ASI” via
modulator “B” (MB).
HF#output
ASI#output
Modulator#
"B"
Modulator
"A"
Combiner
TS##ASI
Transport#stream#1
ASI#input
Transport#stream#2
2.4.3 General
The cassette is equipped with two channel strips (“
A
” and “
B
”). The chan-
iÊÃÌÀ«ÃÊVÃÃÌÊvÊÌiÊ`}Ì>ÊÌÕiÀÃ]ÊÌiÊ`}Ì>ÊÃ}>Ê«Ài«>À>ÌÊÕÌÃÊ>`Ê
the output converter.
The channel strips are indicated in the head-end sta-
tion display with “Bx …A” and “Bx …B”. Using an adequate CA module
scrambled channels can be descrambled via channel strip “A”. In addition
cassette HDTV 1001 C is able to scramble unscrambled channels via an ad-
equate CA module. The control of the cassette takes place via the control unit
of the head-end station.
Two LEDs indicate if the respective channel strip is switched on (LED illumi-
>ÌiîÊÀÊvv]Ê>`Ê>ÃÊ«ÀÛ`iÊ>Ê`V>ÌÊvÊÌiÊÃ}>ʵÕ>ÌÞÊL>Ãi`ÊÊ
their colour. Additionally the quality of the transport stream received is dis-
played (“CN…”).
The integrated TPS module (Transport Stream Processing) processes the data
from the demodulated transport streams.
The HF output signals are sent through the HF output of the cassette to the out-
put collector. The common output level of the channel strips can be set at the
output collector. Additionally a transport stream is made available via the ASI
output dependent on the signal path set.
Ê7iÊÌiÊi>`i`ÊÃÌ>ÌÊÃÊÃÜÌVi`Ê]ÊÌiÊÌÜiÊÊ`ë>ÞÊÃÜÃÊÌiÊ
software version of the control unit.
To operate this cassette the software version of the control unit must be “V 41”
or higher. You can find the current operating software for the control unit and
ÌiÊV>ÃÃiÌÌi]ÊÌiÊÃvÌÜ>ÀiʺBE-Flash” and the current assembly instructions on
the website “www.gss.de”.
The cassette is designed for use in the following head-end stations:
STC 1200]ÊSTC 316] STR 19-8 and PST 19-1
- 9 - HDTV 1000 ASI LAN / HDTV 1001 C
2.5 Software query
Control unit
ÊvÊ iViÃÃ>ÀÞ]Ê ÞÕÊ V>Ê>VÌÛ>ÌiÊ ÌiÊ`V>ÌÊ vÊ ÌiÊÃvÌÜ>ÀiÊÛiÀÃÊ vÊ ÌiÊ
control unit manually:
Ê UÊ *ÀiÃÃÊ>ÞÊÌÜÊiÞÃÊÊÌiÊVÌÀÊÕÌÊvÊÌiÊi>`i`ÊÃÌ>ÌÊÃÕÌ>iÕÃÞÊ
ÕÌÊÌiÊ`ë>ÞÊ}iÃÊ`>ÀÊ>`ÊÌiÊÃvÌÜ>ÀiÊÛiÀÃ]Êi°}°ÊºV 41” appears.
2.6 How the TPS module works
Ê vÌiÀÊ `iV`}Ê +*-Ê ÀÊ n*-`Õ>Ìi`Ê Ã}>Ã]Ê ÌiÊ `i`Õ>Ìi`Ê `>Ì>Ê
ÃÌÀi>Ê V>Ê LiÊ >VViÃÃi`Ê Û>Ê ÌiÊ Ìi}À>Ìi`Ê /*-Ê `Õi°Ê /ÃÊ `>Ì>Ê ÃÌÀi>]Ê
>ÃÊV>i`ÊÌÀ>ëÀÌÊÃÌÀi>]ÊVÌ>ÃÊÃiÛiÀ>ÊÃÌ>ÌÃÊÊ>ÊÌiÀÊV«iÌÃÊ
Û`i]Ê>Õ`]Ê`>Ì>Ê>`ÊÃiÀÛViÊvÀ>Ì®]ÊÜVÊV>ÊLiÊV>}i`ÊÕÃ}ÊÌiÊ
TPS module.
Station filter
Ê`Û`Õ>Ê ÃÌ>ÌÃÊ V>Ê LiÊ `iiÌi`°Ê /ÃÊ Ài`ÕViÃÊ ÌiÊ `>Ì>Ê À>ÌiÊ >`]Ê VÃi-
µÕiÌÞ]ÊÌiÊÕÌ«ÕÌÊÃÞLÊÀ>ÌiÊÀiµÕÀi`°Ê``Ì>ÞÊÃÌ>ÌÃÊvÊÌiÊ`vviÀiÌÊ
transport streams can be assembled to a new transport stream.
Stuffing
Ê/iÊÌÀ>ëÀÌÊÃÌÀi>ÊÃÊ«>``i`ÊÕÃ}ÊÜ>ÌÊÃÊÜÊ>ÃÊâiÀÊ`>Ì>°Ê/ÃÊiÃÕÀiÃÊ
a steady and constant output symbol rate.
Changing the Transport stream and ORGNET-ID
The transport stream ID can be changed. If the stations of a transponder are
ëÌÊÌÊÌiÊÌÀ>ëÀÌÊÃÌÀi>ÃÊvÊÌiÊV>iÊÃÌÀ«ÃÊ»»Ê>`Ê»»]ÊiÊvÊÌiÊLÌÊ
transport streams a new identification must be allocated to realise the channel
search of the settop boxes connected without mistakes.
If the ORGNET-ID is changed a new NIT must be generated.
Changing the NIT
The transport stream contains data in the form of tables which the receiv-
ers evaluate and require for convenient use. The TPS module can adjust the
“Network Information Table” (NIT) to accommodate the new station data. The
“NIT” contains data which is required by the set-top box for the automatic
search feature.
- 10 - HDTV 1000 ASI LAN / HDTV 1001 C
Changing the operator ID (CAT)
Some network operators transmit an operator ID in the data stream (e.g.
visAvision). By changing the CAT the operator ID can be adjusted to the de-
mands.
2.7 Explanation of the term “symbol rate”
Modulation schemes such as QPSK and QAM transmit multiple bits simultane-
ously. These are referred to as symbols. In addition to the user data flow which
ÌÀ>ÃÌÃÊÛ`iÊ>`Ê>Õ`ÊvÀ>Ì]ÊiÀÀÀÊVÀÀiVÌÊLÌÃÊ>ÀiÊÌÀ>ÃviÀÀi`°Ê
The FEC number states the ratio of user bits to the complete transmitted bits.
The output symbol rate is calculated as follows:
256-QAM: SR (A) = FEC x
1
/
4
x SR (E)
128 - QA M: SR (A) = FEC x
2
/
7
x SR (E)
64-QAM: SR (A) = FEC x
1
/
3
x SR (E)
32-QAM: SR (A) = FEC x
2
/
5
x SR (E)
16 - QAM: SR (A) = FEC x
1
/
2
x SR (E)
4-QAM: SR (A) = FEC x
1
/
1
x SR (E)
Example:
Ê "ÕÌ«ÕÌÊÃÞLÊÀ>ÌiÊÈ{+]
FEC=
3
/
4
]
Ê «ÕÌÊÃÞLÊÀ>ÌiÊ-,Ê®ÊrÊÓÇ]xääÊ
kSymb/s
SR (A)
=
3
/
4
x
1
/
3
ÊÝÊÓÇ]xääÊ
kSymb/s
=
6,875 kSymb/s
Note:
ÊvÊʺ»ÊÃÊÃÌ>Ìi`ÊÊÌiÊÃÌ>ÌÊÃÌÃ]ÊÌÊV>ÊLiÊ>ÃÃÕi`ÊÌÊLiʺÊrÊ
3
/
4
”.
Reception from a transponder with a very low symbol rate (SCPC station)
The extremely low data rate means that the output symbol rate is very low. If
ÌiÀiÊ>ÀiÊÀiVi«ÌÊ«ÀLiÃÊÜÌÊ`vviÀiÌÊ`}Ì>ÊÀiViÛiÀÃ]ÊÃiÌÊÕÌ«ÕÌÊÃÞLÊ
rate to a higher value.
Defined symbol rates
Ê-iÊV>LiÊ«iÀ>ÌÀÃÊëiVvÞÊ>ÊvÝi`ÊÃÞLÊÀ>ÌiÊi°}°ÊÈ]ääÊ-ÞLÉî°Ê
- 11 - HDTV 1000 ASI LAN / HDTV 1001 C
3 Assembly
3.1 Installing the cassette
– Ensure the head-end station is mounted so it will not be able to vibrate.
Û`]ÊvÀÊiÝ>«i]ÊÕÌ}ÊÌiÊi>`i`ÊÃÌ>ÌÊÌÊ>ÊvÌÊÃ>vÌÊÀÊ>ÞÊ
other wall or floor construction that vibrates in a similar way.
– Before installing or changing a cassette unplug the power cable from the
mains power socket.
Ê UÊ ,iÛiÊÌiÊv>ÃÌi}ÊÃVÀiÜÃÊ1 of an unoccupied slot from the bracket of
the head-end station.
Ê UÊ ÃiÀÌÊÌiÊV>ÃÃiÌÌiÊÊÌÃÊÃÌÊ>`Ê«ÕÃÊÌÊÌÊÌiÊÕÃ}°
Ê UÊ }ÊÌiÊV>ÃÃiÌÌiÊ>`Ê>««ÞÊÃ}ÌÊ«ÀiÃÃÕÀiÊÌÊViVÌÊÌÊÌÊÌiÊViVÌÃÊ
of the board and the HF bus bar.
Ê UÊ >ÃÌiÊÌiÊV>ÃÃiÌÌiÊÜÌÊÌiÊÃVÀiÜÃÊ1.
0°
CASSETTE
CASSETTE
CASSETTE
CASSETTE
CASSETTE
CASSETTE
CASSETTE
CASSETTE
CASSETTE
CASSETTE
CASSETTE
CASSETTE
MESSAUSGANG
A
ACHTUNG!
Vor dem Cassettenwechsel
unbedingt Netzstecker ziehen!
CAUTION!
Before changing cassettes remove
mains plug!
3.2 EMC regulations
To comply with the current EMC regulations, it is necessary to connect the lines
leading in and out of the head-end station using cable terminals.
CLASS
KLASSE
The attenuation of shielding of the connection lines for ASI and antenna must
meet the requirements for “Class A”.
When mounting the cassette in a STR 19-8 or PST 19-1 head-end station which
is installed in a 19" cabinet, make sure the connections leading in and out for
the 19" cabinet are made using cable terminals.
- 12 - HDTV 1000 ASI LAN / HDTV 1001 C
Ê UÊ ÃiÀÌÊÌiÊÀiµÕÀi`ÊÕLiÀÊvÊV>LiÊÌiÀ>ÃÊÊÌiÊ«i}ÃÊ«ÀÛ`i`ÊÊ
the head-end station or in the 19
"
cabinet.
—> Cable terminals are not included in the scope of delivery.
Tighten the nut on the
cable
terminal until the teeth on the lock washer have pen-
etrated the exterior coating and a good connection is made between the housing
and
cable
terminal.
3.3 Connecting the cassette
RS232
7
Slot(for(a
CA(module
6
LAN
3
ASI(output
5
SAT(input("A"
2
ASI(input
4
SAT(input("B"
1
Ê UÊ
Plug the SAT input cables into the SAT input sockets “
SAT input A
” 2 (chan-
nel strip “A”) and “
SAT input B
” 1 (channel strip “B”).
—> LAN socket
3
(intended for additional functions)
Ê UÊ iVÌÊÌiÊ-ÊÃViÌÃÊ4 and 5.
ÊU
Connect the head-end station to the mains power supply.
Slot for a CA module 6
“RS-232“ socket 7
The operating software of the
cassette
can be updated via the 9-Pin D-SUB
socket “RS232” using a PC or notebook and the software “BE-Flash”.
You can find the current operating software on the website “www.gss.de”.
- 13 - HDTV 1000 ASI LAN / HDTV 1001 C
3.4 Retrofitting a CA module
The cassette is equipped with a common interface. It allows you to connect a
CA module for various scrambling systems and service providers. Scrambled
channels can only be descrambled with a CA module suitable for the scram-
bling system and the corresponding smart card. The smart card contains all the
vÀ>ÌÊvÀÊ>ÕÌÀÃ>Ì]Ê`iÃVÀ>L}Ê>`ÊÃÕLÃVÀ«Ì°
Caution
– Check with the distributor or manufacturer of the CA module to be used
to ensure that it is suitable for de
scrambl
ing several channels.
– The hardware and software of this cassette have been thoroughly prepared
and tested.
– Any changes made by programme providers to the structures in the pro-
gramme data might impair or even prevent this function.
Ê qÊ 7iÊÜÀ}ÊÜÌÊÌiÊÊ`Õi]Ê«i>ÃiÊÀi>`ÊÌiÊVÀÀië`}Ê«iÀ>Ì-
ing manual from the respective provider.
Ê UÊ ÃiÀÌÊÌiÊÃ>ÀÌÊV>À`
into the CA module
so that the chip
on the smart card
faces the thicker side (top) of the CA module.
Ê UÊ ÃiÀÌÊÌiÊÊ`ÕiÊÌÊÌiÊÃÌ
6 (see chap. 3.3) with the top side of the
CA module facing the top side of the cassette.
Ê UÊ *ÕÃÊÌiÊÊ`ÕiÊÜÌÕÌÊV>Ì}ÊÌÊÌiÊ}Õ`iÊÀ>ÃÊvÊÌiÊÊÃÌÊ6
and contact it to the common interface.
- 14 - HDTV 1000 ASI LAN / HDTV 1001 C
4 The control panel at a glance
4.1 Menu items
Programme the
cassette
using the buttons on the control unit of the head-end
station. The two-line display of the control unit then shows the menus.
The parameters and functions to be set are underlined.
Use the key to select the following main menu items:
– Input signal path
– Output signal path
– Channel strip
– Selecting channel / frequency setting
– Output channel / output frequency
– Output level
– LNB oscillator frequency
– Input symbol rate
– Input frequency
– Station filter
– QAM modulation
– Stuffing
– Substitute signal
– Transport stream and ORGNET-ID
– Network Information Table (NIT)
–
Network/operator identification
– Deleting a PID
– Renaming a PID
– Factory reset
4.2 Control panel
The key pad on the head-end station is used to scroll through the menus and
menu items one at a time:
scrolls forward through the menus.
select parameters in the menus.
ÃiÌÊÛ>ÕiÃ]ÊÌ>ÌiÊ>VÌð
selects sub-menus.
scrolls backward through the menus.
saves all entries
(in menu “DEFAULT” -> Factory reset).
BE-Remote
V41
please wait . . .
- 15 - HDTV 1000 ASI LAN / HDTV 1001 C
5 Programming
5.1 Preparation
Ê UÊ iVÌÊÌiÊÌiÃÌÊÀiViÛiÀÊÌÊÌiÊÊÕÌ«ÕÌÊÀÊÌiÊÌiÃÌÊÕÌ«ÕÌÊvÊÌiÊi>`i`Ê
station.
Ê UÊ -iÌÊÌiÊÕÌ«ÕÌÊV>iÊÉÊÕÌ«ÕÌÊvÀiµÕiVÞÊvÊÌiÊ
cassette
(see page 23) and
adjust the TV test receiver to this channel.
Ê UÊ
Switch on the channel strip (modulator) if necessary (see page 25). For each
V>iÊÃÌÀ«]Ê ÌiÀiÊ ÃÊ >Ê ÃÌ>ÌÕÃÊ ÊÜVÊ`V>ÌiÃÊ vÊÌiÊ V>iÊÃÌÀ«ÊÃÊ
switched on.
Status&LED&
Channel&strip
"B"
Status&LED&
Channel&strip
"A"
Ê UÊ >>ViÊÌiÊÕÌ«ÕÌÊiÛiÃÊvÊÌiÊV>iÊÃÌÀ«ÃʺA” and “B” if the difference
in level is 1 dB (page 25).
5.2
Notes on level setting
In order to prevent interference within the head-end station and the cable sys-
Ìi]ÊÌiÊÕÌ«ÕÌÊiÛiÊvÊÌiÊV>ÃÃiÌÌiÊÕÃÌÊLiÊ`iVÀi>Ãi`ÊLÞÊ£äÊ`ÊV«>Ài`ÊÌÊ
>>}ÕiÊV>ÃÃiÌÌiÃÊ>ÌÊÈ{Ê+]Ê>`ÊLÞÊ{Ê`ÊV«>Ài`ÊÌÊ>>}ÕiÊV>ÃÃiÌÌiÃÊ
at 256 QAM.
Ê UÊ i>ÃÕÀiÊÌiÊÕÌ«ÕÌÊiÛiÃÊvÊÌiÊÌiÀÊV>ÃÃiÌÌiÃÊ>`ÊÌÕiÊÌiÊÌÊ>ÊÕvÀÊ
output level using the appropriate level controls or software dependent on
the head-end station used. Please regard the assembly instructions of the
respective head-end station.
- 16 - HDTV 1000 ASI LAN / HDTV 1001 C
5.3 Programming procedure
Channel strips “A” (without CA module) and “B”
!"#$%
&'())*+
,-./-.
&'())*+#0#12*34
!"#$%
567
,-./-.
8)
!"#$%
69:;;
5<=!,>
# ?@!A5#
!"#$%
77BC:#A;4D
1EFG
&H#7$
Å
Ï
0
Å
Ï
0
Å
Ï
0
8)#0#8II
Å
Ï
0
Å
Ï
0
!"#$%
# ;#J!
>F@F>
!"#$%
7;D;;#=KL
>H!
;#M#A7;#J!
!"#$%
764;#J!
&0H
NO#P4DQ#,R
!"#$%&$'()%&"*+,-*+%./.
!"#$%&'()*"+,&%)-.&%"/'
Å
Ï
0
?@!A5#0#?@!A5#6#M
!"#$%
1S+T*2
/E,UE%=
8II
;707;!"#$%#.@# O
?(V#F2VT*
012&1*33$($".4$1"$"(5(6%"#-47&$"
01234",+)5)&6/"4&/",+)#/&/"3,#
"/869.$1()$1:%8$(;012&1*33<(
,17/)#184"61)9#/&/"3,:
Å
Ï
0
;607P!"#$!#.@# O
5W1C
012&1*33$($".4$1"$"(5(6%"#-47&$"
01234",+)5)&6/"4&/",+)#/&/"3,#
"/869.$1()$1:%8$(;012&1*33<(
,17/)#184"61)9#/&/"3,:
Å
Ï
0
;707;%5X# .@# O
4#4#4#4#4
012&1*33$($".4$1"$"(5(6%"#-47&$"
01234",+)5)&6/"4&/",+)#/&/"3,#
"/869.$1()$1:%8$(;012&1*33<(
,17/)#184"61)9#/&/"3,:
Å
Ï
0
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
B
A
!"#$%
5EYDP;;##NDC6:Q
5.-11XHU
!"#$%
HZ++#/([\*TV
1%X>-EF
!"#$%
#D$AG%=
G%=
)82](+
Å
Ï
0
Å
Ï
0
Å
Ï
0
$#M#6:D
)82](+#0#S)^*2V*
HZ++#/([\*TV#M#5S)_+*#&(22S*2#
!"#$%
8II
HX.
Y`# =(\*
!"#$%
;";;;7a;7;;
.50,HX?
8II
8)#0#8II
Å
Å
8)#0#8II =(\*
!"#$%
/X?#;";;;;
?E,/
8II
!"#$%
;b?F;;
&%.AX?
8II
Å
Ï
0
!"#$%
##?*I(Z+TV
1%&.,E<
Y`###
!"#$%
#5.,EF
1%&.,E<
Y`##=###
8)#0#8II
Å
Ï
0
Å
Ï
0
8)#0#8II
Å
Ï
0
(ZI#W*2\V*S)VT*++Z)_#
LZ2c[\V*TL*)#Z)J#Vd*S['*2)
reset%to%factory%defaults%
and%store
C
D
=*"*+#-&(>!?(3%.(@!AB2C-+((
;<&,,1%)#/8"$)=>=)?"/<);>)23@.%1
26"$(@!AB2C-+(
?"/<3./);>)23@.%1
=*"*+#-&(>D?(
;<&,,1%)#/8"$)=A=
Å
Å
Ï
0
8)#0#8II
Å
Ï
0
!"#$
>S)*#%#eY#
>XHF
Y`#>S)*#!
>S)*#%#5(>S)*#!
B
A
FS)#0#,)
!FfE*]8T*
d+*(V*#g(ST#M
@#$7
!8"#$
@#76#
?@!56A./=
f#f#f
!"#7%
&:A76a5CA6$
.WXHA5%.
&;9
!"#7%
&:A76a5CA6$
.WXHA5%.
&;9
!h"#$
&:A76a5CA6$
.WXHA5%.
&;9
!"#:%
!?C
?@!.A?@!.
&;P
O
T#`#7;#V
!"#$
%O!O%5XY7#
XHE,-.F
%5XY6
%O%5XY7# !O%5XY6#0
%O!O%5XY7# %5XY6#0
%O%5XY7# %O%5XY6##
7Y`%5X# %5XY`=%
6Y`%5X# %5XY`=!
%5XY`%5X
!"#$
7Y`%5X#
,-.E,-.F
%5XY`=%
!"#$
7;B;;;#R!STV#
%5X#E%.F
7BB#0#6;$
d8VSTS^*#0#)*_(TS^
[8)TS)Z8ZV#0#iZ2VT
!"#$
7BB# d8V4# [8)T4#
%5X#,/.X,H
Å
Ï
0
Å
Ï
0
!"#$%
;";;;;#f`#;;;;
EF=%/
8II
Page 18
Page 18
- 17 - HDTV 1000 ASI LAN / HDTV 1001 C
!"#$%
&'())*+
,-./-.
&'())*+#0#12*34
!"#$%
567
,-./-.
8)
!"#$%
69:;;
5<=!,>
# ?@!A5#
!"#$%
77BC:#A;4D
1EFG
&H#7$
Å
Ï
0
Å
Ï
0
Å
Ï
0
8)#0#8II
Å
Ï
0
Å
Ï
0
!"#$%
# ;#J!
>F@F>
!"#$%
7;D;;#=KL
>H!
;#M#A7;#J!
!"#$%
764;#J!
&0H
NO#P4DQ#,R
!"#$%&$'()%&"*+,-*+%./.
!"#$%&'()*"+,&%)-.&%"/'
Å
Ï
0
?@!A5#0#?@!A5#6#M
!"#$%
1S+T*2
/E,UE%=
8II
;707;!"#$%#.@# O
?(V#F2VT*
012&1*33$($".4$1"$"(5(6%"#-47&$"
01234",+)5)&6/"4&/",+)#/&/"3,#
"/869.$1()$1:%8$(;012&1*33<(
,17/)#184"61)9#/&/"3,:
Å
Ï
0
;607P!"#$!#.@# O
5W1C
012&1*33$($".4$1"$"(5(6%"#-47&$"
01234",+)5)&6/"4&/",+)#/&/"3,#
"/869.$1()$1:%8$(;012&1*33<(
,17/)#184"61)9#/&/"3,:
Å
Ï
0
;707;%5X# .@# O
4#4#4#4#4
012&1*33$($".4$1"$"(5(6%"#-47&$"
01234",+)5)&6/"4&/",+)#/&/"3,#
"/869.$1()$1:%8$(;012&1*33<(
,17/)#184"61)9#/&/"3,:
Å
Ï
0
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
B
A
!"#$%
5EYDP;;##NDC6:Q
5.-11XHU
!"#$%
HZ++#/([\*TV
1%X>-EF
!"#$%
#D$AG%=
G%=
)82](+
Å
Ï
0
Å
Ï
0
Å
Ï
0
$#M#6:D
)82](+#0#S)^*2V*
HZ++#/([\*TV#M#5S)_+*#&(22S*2#
!"#$%
8II
HX.
Y`# =(\*
!"#$%
;";;;7a;7;;
.50,HX?
8II
8)#0#8II
Å
Å
8)#0#8II =(\*
!"#$%
/X?#;";;;;
?E,/
8II
!"#$%
;b?F;;
&%.AX?
8II
Å
Ï
0
!"#$%
##?*I(Z+TV
1%&.,E<
Y`###
!"#$%
#5.,EF
1%&.,E<
Y`##=###
8)#0#8II
Å
Ï
0
Å
Ï
0
8)#0#8II
Å
Ï
0
(ZI#W*2\V*S)VT*++Z)_#
LZ2c[\V*TL*)#Z)J#Vd*S['*2)
reset%to%factory%defaults%
and%store
C
D
=*"*+#-&(>!?(3%.(@!AB2C-+((
;<&,,1%)#/8"$)=>=)?"/<);>)23@.%1
26"$(@!AB2C-+(
?"/<3./);>)23@.%1
=*"*+#-&(>D?(
;<&,,1%)#/8"$)=A=
Å
Å
Ï
0
8)#0#8II
Å
Ï
0
!"#$
>S)*#%#eY#
>XHF
Y`#>S)*#!
>S)*#%#5(>S)*#!
B
A
FS)#0#,)
!FfE*]8T*
d+*(V*#g(ST#M
@#$7
!8"#$
@#76#
?@!56A./=
f#f#f
!"#7%
&:A76a5CA6$
.WXHA5%.
&;9
!"#7%
&:A76a5CA6$
.WXHA5%.
&;9
!h"#$
&:A76a5CA6$
.WXHA5%.
&;9
!"#:%
!?C
?@!.A?@!.
&;P
O
T#`#7;#V
!"#$
%O!O%5XY7#
XHE,-.F
%5XY6
%O%5XY7# !O%5XY6#0
%O!O%5XY7# %5XY6#0
%O%5XY7# %O%5XY6##
7Y`%5X# %5XY`=%
6Y`%5X# %5XY`=!
%5XY`%5X
!"#$
7Y`%5X#
,-.E,-.F
%5XY`=%
!"#$
7;B;;;#R!STV#
%5X#E%.F
7BB#0#6;$
d8VSTS^*#0#)*_(TS^
[8)TS)Z8ZV#0#iZ2VT
!"#$
7BB# d8V4# [8)T4#
%5X#,/.X,H
Å
Ï
0
Å
Ï
0
!"#$%
;";;;;#f`#;;;;
EF=%/
8II
Page 19
- 18 - HDTV 1000 ASI LAN / HDTV 1001 C
!"#$%
&'())*+
,-./-.
&'())*+#0#12*34
!"#$%
567
,-./-.
8)
!"#$%
69:;;
5<=!,>
# ?@!A5#
!"#$%
77BC:#A;4D
1EFG
&H#7$
Å
Ï
0
Å
Ï
0
Å
Ï
0
8)#0#8II
Å
Ï
0
Å
Ï
0
!"#$%
# ;#J!
>F@F>
!"#$%
7;D;;#=KL
>H!
;#M#A7;#J!
!"#$%
764;#J!
&0H
NO#P4DQ#,R
!"#$%&$'()%&"*+,-*+%./.
!"#$%&'()*"+,&%)-.&%"/'
Å
Ï
0
?@!A5#0#?@!A5#6#M
!"#$%
1S+T*2
/E,UE%=
8II
;707;!"#$%#.@# O
?(V#F2VT*
012&1*33$($".4$1"$"(5(6%"#-47&$"
01234",+)5)&6/"4&/",+)#/&/"3,#
"/869.$1()$1:%8$(;012&1*33<(
,17/)#184"61)9#/&/"3,:
Å
Ï
0
;607P!"#$!#.@# O
5W1C
012&1*33$($".4$1"$"(5(6%"#-47&$"
01234",+)5)&6/"4&/",+)#/&/"3,#
"/869.$1()$1:%8$(;012&1*33<(
,17/)#184"61)9#/&/"3,:
Å
Ï
0
;707;%5X# .@# O
4#4#4#4#4
012&1*33$($".4$1"$"(5(6%"#-47&$"
01234",+)5)&6/"4&/",+)#/&/"3,#
"/869.$1()$1:%8$(;012&1*33<(
,17/)#184"61)9#/&/"3,:
Å
Ï
0
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
B
A
!"#$%
5EYDP;;##NDC6:Q
5.-11XHU
!"#$%
HZ++#/([\*TV
1%X>-EF
!"#$%
#D$AG%=
G%=
)82](+
Å
Ï
0
Å
Ï
0
Å
Ï
0
$#M#6:D
)82](+#0#S)^*2V*
HZ++#/([\*TV#M#5S)_+*#&(22S*2#
!"#$%
8II
HX.
Y`# =(\*
!"#$%
;";;;7a;7;;
.50,HX?
8II
8)#0#8II
Å
Å
8)#0#8II =(\*
!"#$%
/X?#;";;;;
?E,/
8II
!"#$%
;b?F;;
&%.AX?
8II
Å
Ï
0
!"#$%
##?*I(Z+TV
1%&.,E<
Y`###
!"#$%
#5.,EF
1%&.,E<
Y`##=###
8)#0#8II
Å
Ï
0
Å
Ï
0
8)#0#8II
Å
Ï
0
(ZI#W*2\V*S)VT*++Z)_#
LZ2c[\V*TL*)#Z)J#Vd*S['*2)
reset%to%factory%defaults%
and%store
C
D
=*"*+#-&(>!?(3%.(@!AB2C-+((
;<&,,1%)#/8"$)=>=)?"/<);>)23@.%1
26"$(@!AB2C-+(
?"/<3./);>)23@.%1
=*"*+#-&(>D?(
;<&,,1%)#/8"$)=A=
Å
Å
Ï
0
8)#0#8II
Å
Ï
0
!"#$
>S)*#%#eY#
>XHF
Y`#>S)*#!
>S)*#%#5(>S)*#!
B
A
FS)#0#,)
!FfE*]8T*
d+*(V*#g(ST#M
@#$7
!8"#$
@#76#
?@!56A./=
f#f#f
!"#7%
&:A76a5CA6$
.WXHA5%.
&;9
!"#7%
&:A76a5CA6$
.WXHA5%.
&;9
!h"#$
&:A76a5CA6$
.WXHA5%.
&;9
!"#:%
!?C
?@!.A?@!.
&;P
O
T#`#7;#V
!"#$
%O!O%5XY7#
XHE,-.F
%5XY6
%O%5XY7# !O%5XY6#0
%O!O%5XY7# %5XY6#0
%O%5XY7# %O%5XY6##
7Y`%5X# %5XY`=%
6Y`%5X# %5XY`=!
%5XY`%5X
!"#$
7Y`%5X#
,-.E,-.F
%5XY`=%
!"#$
7;B;;;#R!STV#
%5X#E%.F
7BB#0#6;$
d8VSTS^*#0#)*_(TS^
[8)TS)Z8ZV#0#iZ2VT
!"#$
7BB# d8V4# [8)T4#
%5X#,/.X,H
Å
Ï
0
Å
Ï
0
!"#$%
;";;;;#f`#;;;;
EF=%/
8II
Page 16
Page 16
- 19 - HDTV 1000 ASI LAN / HDTV 1001 C
Channel strip “A” with CA module
Bx#4A
Menu#<=#
CA
=>#Edit
*)# Die#angezeigte#Information#ist#
# abhängig#vom#verwendeten
# CA:Modul.#
! The!information!displayed!is!
! dependent!on!the!CA!module
! used.
Bx#4A# 01/03
Information#*)
MENU#
Bx#4A# TV# X
.#.#.#.##
04/09
X#–# entschlüsseln##
!! descrambling
0# –# nicht#entschlüsseln
!! no!descrambling
X#/#0#
nächster#Service
next!service
Bx#4A
PID#Check
CA
on
Å
Ï
on#/#off
M
Å
Ï
/
D
Bx#4A
scramble
CA
####
scramble#/#descramble
C
scramble
descramble
Page 17
Page 17
only HDTV 1001 C
- 20 - HDTV 1000 ASI LAN / HDTV 1001 C
5.4 Programming the cassette
—> Pressing the button for longer than 2 seconds cancels the pro-
gramming procedure. This takes you back to the programme item “Select-
ing the cassette” from any menu. Any entries that have not been saved
are reset to the previous settings.
—> Entries in the menus can be saved by pressing the key. You are taken
back to the “Selecting the cassette” menu item.
Ê UÊ -ÜÌVÊÊÌiÊi>`i`ÊÃÌ>Ì
—> The display shows the software version (e.g. V 41)
—> The processor reads the
cassettes
‘ data (approximately 10 seconds).
Selecting the cassette
Ê UÊ -iiVÌÊÌiÊ
cassette
you want to programme (e.g. Box 4) by repeatedly press-
ing the button if necessary.
—> The display shows e.g. the menu
:
Box 4 DVBS2-TPM
V12
“Box 4” stands for
slot
4
”DVBS2-TPM” Type of cassette
”V 12” Software version of the cassette
Ê UÊ *ÀiÃÃÊÌiÊ button.
—> The “Selecting the input signal path” – “INROUTE” menu is activated.
Ein$/$On
BE–Remote
please$wait$…
V$41
t$>$10$s
A
!"#$%
&$'($
)&!*(+,-.
/$/$/
!#$'0
12+'(3*4+(%
,567+*0,
189
!#$'0
12+'(3*4+(%
,567+*0,
189
!:#$%
12+'(3*4+(%
,567+*0,
189
!#$20
!)4
)&!,+)&!,
18;
<
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45

GSS HDTV 1001 C Assembly Instructions Manual

GSS
Brand
GSS
Model
HDTV 1001 C
Type
Assembly Instructions Manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents