Argos Bali KD Armchair and Cushion Assembly Instructions Manual

Brand
Argos
Model
Bali KD Armchair and Cushion
Type
Assembly Instructions Manual
Dimensions
Width - 62cm
Depth - 60cm
Height - 88cm
Issue 1 - 26/05/10
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400 800
For further assistance please visit http://www.argos-support.co.uk/
Assembly Instructions - Please keep for future reference
Bali KD Armchair and Cushion
654/6410
Important –
•
1
Safety and Care Advice
Important – Please read these instruction s ful ly be fore starting ass e mbly
• Check you have all the
components and tools listed on
pages 2.
plastic bags and separate them
into their groups.
• Keep child ren and animals
away from the work area, small
parts could choke if swallowed.
• Make su re you have enough
space to layout the parts before
starting.
• Do not stand or put weight on the
product during assembly, this could
cause damage.
• Assemble the item as close
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
armchair or your floor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws ,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
Care and mainte nance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
r
the e are no loose screws on
• F om time to time check that
r
this armchair.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
• Do not fully tighten all screws
until assembly is complete.
• Make sure each screw
matches the corresponding
figure to ensure correct
assembly.
• Maximum safe seated
weight: 110kgs.
Components - Parts
Please check you have all the parts listed below
2
Armrest x 2
2
Back board x 1
1
3
4
Seat board x 1
Front board x 1
Components - Fittings
Allen key x 1 Cushion x 1
Note:
The quantities
below are the correct amount to complete the assembly.
A
Metal washer x 8
B
Plastic cap x 8
C
F
D
E
Plastic washer x 8
30mm Screw x 8
Please check you have all the fittings listed below
R uler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
110 115 120 125 130 135 140 145 150 155 160 165 170
105
Assembly Instructions
Step 1
Assembly frame
Step 2
Important:
Do not fully
tighten all screws
until assembly is
complete.
3
Use 30mm screw
and metal washer
with plastic washer
to fix the armrest
to the back board.
Repeat above step
for each of the 4
positions.
Use 30mm screw
and metal washer
with plastic washer
to fix the armrest
to the front board.
Repeat above step
for each of the 4
positions.
A
B
D
2
1
2
D
B
A
2
4
A
B
D
2
4
.
.
1
2
1
4
2
Suggest to complete this
product assembly by two
person.
A
B
D
Assembly Instructions
4
Step 3
Turn the armchair to the
upright position and
tighten all the screws.
with the Allen key .
Seal the screws
with plastic cap
Step 4
C
.
Fit the seat board
onto the armchair
assembly with the seat
side uppermost
3
C
3
E
Assembly Instructions
5
Step 5
Put on the cushion
to fit for the seat board.
F
Argos Limited
489-499 Avebury Boulevard Saxon Gate West Central Milton Keynes Bucks,MK9 2NW
F
FF
Assembly is complete.
If you need help or have damaged or missing p
For further assistance please visit http://www.argos-support.co.uk/
arts, call the
Customer Helpline: 03456 400800
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Argos Bali KD Armchair and Cushion Assembly Instructions Manual

Brand
Argos
Model
Bali KD Armchair and Cushion
Type
Assembly Instructions Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents