3
For further assistance please visit http://www.argos-support.co.uk/
• Check you have all the
components and tools listed on
pages 2 and 3.
• Do not stand or put weight on
the product, this could cause
damage.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Assemble the unit as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• If using power tools,please
follow the safety instructions
supplied with the tools.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Warning:The unit weights
approxomately 5 kgs.
Please lift with care.
Care and maintenance
Important – Please read these instructions fully before starting assembly
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
• Suggestion:When you do not
use it ,find one suitable cover
on it.
• Don`t fully tighten all screws
until assembly is complete.
• Make sure each screw match
the correspondingfigure to
ensure correct assembly.
1
Safety and Care Advice
For further assistance please visit http://www.argos-
support.co.uk/
1
2
3
3
M6x32
M6x28
Not included
Fix the studs to the leg
support first
fig.3
3
Tighten all the screws.
1
3
2
2
1
1
1
3
3
2
2
The rubber screw caps at
bottom of the four legs
can be adjusted.
If necessary, to make the
legs level with the ground.
Rubber screw cap
3
For further assistance please visit http://www.argos-support.co.uk/
/
