2. Aastra
  3. MBU 400

Aastra MBU 400 Admin Manual

  • Hello! I am an AI chatbot trained to assist you with the Aastra MBU 400 Admin Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Aastra MBU400
Admin Guide
Schmooze Com Inc.
LAN
VOIP
I-NET
POWER
CLR
System status
-- Network --
MAC Address
00-00-XX-XX-XX-XX
IP address
10.10.0.224 (D)
Boot Status
OK
Chapters
Reset to Factory Defaults
How to Find the IP Address and MAC Address
How to Set the Configuration Server
Reset to Factory Defaults
Quick Steps
1. Press the hold the reset button on the MBU Base Unit for 15 seconds.
2. All front panel lights come on when a factory restart is initiated.
© Copyright Schmooze Com, 2012
How to Find the IP Address and MAC Address
Quick Steps
1. On the handset press the up volume key (+).
2. The screen on the handset will now display the IP address and MAC address.
How to Set the TFTP Boot Server
Quick Steps
1. Find the IP Address of the Phone and open a web browser to the IP address of the phone.
2. Login with the phone admin password. Factory default password is 222222.
3. Click on the Management Settings on the left side.
4. Define the Configuration Server Address to your PBX. Generally this would be
IPADDRESS such as 10.10.0.1 in our example. Define what Management Transfer
Protocol to use in our example we are picking TFTP and press the Save Changes button.
RESET
LAN
LINE
DC9-20V
Chapters
Reset to Factory Defaults
How to Find the IP Address and MAC Address
How to Set the Configuration Server
Reset to Factory Defaults
Quick Steps
1. Press the hold the reset button on the MBU Base Unit for 15 seconds.
2. All front panel lights come on when a factory restart is initiated.
How to Find the IP Address and MAC Address
Quick Steps
1. On the handset press the up volume key (+).
2. The screen on the handset will now display the IP address and MAC address.
© Copyright Schmooze Com, 2012
How to Set the TFTP Boot Server
Quick Steps
1. Find the IP Address of the Phone and open a web browser to the IP address of the phone.
2. Login with the phone admin password. Factory default password is 222222.
3. Click on the Management Settings on the left side.
4. Define the Configuration Server Address to your PBX. Generally this would be
IPADDRESS such as 10.10.0.1 in our example. Define what Management Transfer
Protocol to use in our example we are picking TFTP and press the Save Changes button.
CLR
System status
-- Network --
MAC Address
00-00-XX-XX-XX-XX
IP address
10.10.0.224 (D)
Boot Status
OK
Chapters
Reset to Factory Defaults
How to Find the IP Address and MAC Address
How to Set the Configuration Server
Reset to Factory Defaults
Quick Steps
1. Press the hold the reset button on the MBU Base Unit for 15 seconds.
2. All front panel lights come on when a factory restart is initiated.
How to Find the IP Address and MAC Address
Quick Steps
1. On the handset press the up volume key (+).
2. The screen on the handset will now display the IP address and MAC address.
How to Set the TFTP Boot Server
Quick Steps
1. Find the IP Address of the Phone and open a web browser to the IP address of the phone.
2. Login with the phone admin password. Factory default password is 222222.
3. Click on the Management Settings on the left side.
© Copyright Schmooze Com, 2012
4. Define the Configuration Server Address to your PBX. Generally this would be
IPADDRESS such as 10.10.0.1 in our example. Define what Management Transfer
Protocol to use in our example we are picking TFTP and press the Save Changes button.
The server 10.10.224:80 requires a username and
password.
User Name:
Password:
Cancel Log In
• Home
• VoIP Account 1
• VoIP Account 2
• VoIP Account 3
• VoIP Account 4
• VoIP Account 5
• VoIP Account 6
• VoIP Account 7
• VoIP Account 8
• Management Settings
• NAT/RTP Settings
• IP Settings
• Pincode Settings
• PSTN Settings
• Telephone Settings
• Time Settings
• Debug
• SIP Trace
• Settings
• Logout
Chapters
Reset to Factory Defaults
How to Find the IP Address and MAC Address
How to Set the Configuration Server
Reset to Factory Defaults
Quick Steps
1. Press the hold the reset button on the MBU Base Unit for 15 seconds.
2. All front panel lights come on when a factory restart is initiated.
How to Find the IP Address and MAC Address
Quick Steps
1. On the handset press the up volume key (+).
2. The screen on the handset will now display the IP address and MAC address.
How to Set the TFTP Boot Server
Quick Steps
1. Find the IP Address of the Phone and open a web browser to the IP address of the phone.
2. Login with the phone admin password. Factory default password is 222222.
3. Click on the Management Settings on the left side.
4. Define the Configuration Server Address to your PBX. Generally this would be
IPADDRESS such as 10.10.0.1 in our example. Define what Management Transfer
Protocol to use in our example we are picking TFTP and press the Save Changes button.
© Copyright Schmooze Com, 2012
Management Settings
Configuration server address:
Management password:
Management upload script:
Management Transfer Protocol:
TFTP
10.10.0.1
••••••
/
Schmooze Com Inc.
http://schmoozecom.com
(920) 886-8130
/