X-Micro XBT-DG3X User manual

Bluetooth Stereo Media Phone

User’s Manual

With additional Operation Instruction

for Skype using IVT software

Version1.0

1

Copyright

this publication may be reproduced, transmitted, transcribed, stored in a

retrieval system, or translated into any language or computer language, in

any form or by any means, electronic, mechanical, magnetic, optical,

chemical, manual or otherwise, without the prior written permission of X-Micro

Technology Corp.

Disclaimer

X-Micro Technology Corp. makes no representations or warranties, either

expressed or implied, with respect to the contents hereof and specifically

disclaims any warranties, merchantability or fitness for any particular purpose.

Any software described in this manual is sold or licensed "as is". Should the

programs prove defective following their purchase, the buyer (and not this

company, its distributor, or its dealer) assumes the entire cost of all necessary

servicing, repair, and any incidental or consequential damages resulting from

any defect in the software. Further, X-Micro Technology Corp., reserves the

right to revise this publication and to make changes from time to time in the

contents hereof without obligation to notify any person of such revision or

change.

All brand and product names mentioned in this manual are trademarks and/or

registered trademarks of their respective holders.

2

INFORMATION TO USER

Model Name: XBT-DG7X, XBT-HS3X

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one of the following

measures:

* Reorient or relocate the receiving antenna.

* Increase the separation between the equipment and receiver.

* Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

* Consult the dealer or an experienced radio/TV technician for help.

3

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to operate

this equipment.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

* This equipment complies with FCC radiation exposure limits set forth for

an uncontrolled environment.

This equipment should be installed and operated with minimum distance

20cm between the radiator & your body.

* This transmitter must not be co-located or operating in conjunction with

any other antenna or transmitter.

4

TABLE OF CONTENT

1.Introduction .................................................................................................6

1.1 Bluetooth Stereo Headset

1.2 Package Contents

2. Headset Features ..................................................................................... 6

3. LED Indication .......................................................................................... 7

4. Charge Battery and Reset the Headset ................................................... 7

4.1 Charge Battery

5. Turn On / Off the Headset ........................................................................ 8

5.1 To turn the Headset On

5.2 To turn the Headset Off

6. Connect With PC/Notebook ..................................................................... 8

6.1 Pair with your PC/Notebook

6.2 Play Music with PC and Notebook

6.2.1 Button Functionality Under Music Mode

7. Connect with Skype ……..................................................................... …..13

7.1 Configure Audio Gateway to work with Skype

7.2 Pair Headset with PC

7.3 Establish Link between BTW Software and Skype

7.4 Configure Skype’s Settings

7.5 Basic Operation within Skype Mode

8. Link with Mobile Phone............................................................................. 18

8.1 Pairing

8.2 Connect with Mobile Phone

8.3 Answer & End a Phone Call

5

9. Multiple Links ………………………….................................................. ….23

9.1 Pair both side first

9.2 Switch between Mobile Phone and PC(music)

9.3 Switch between PC(music) and PC(Skype)

9.4 Switch between Mobile phone and PC(Skype)

10. FAQ ..................................................................................................... ..25

11. Support………. ....................................................................................27

6

1 INTRODUCTION

Thank you for your purchasing of our X-Micro Bluetooth Stereo Media

Phone. Bluetooth is a technology which is very popular in short range

wireless communication. It allows wireless connections between Bluetooth

devices such as cellular phones, personal digital assistants (PDA), desktop

and notebook computers, input-output devices (mouse, keyboards,

printers)...etc.

1.1 Bluetooth Stereo Headset

This Bluetooth headset offers the latest innovation in Bluetooth

technology. It features crystal clear stereo sound, which is a remarkable

break through that others do not have. With this Bluetooth stereo headset,

you can connect it wirelessly with other Bluetooth devices such as mobile

phone, desktop or notebook computer, PDA (with audio gateway profile

supported) within a range of 10 meters. (BTW software version 2.0.1.2101

or higher is recommended.)

1.2 Package Content

* Bluetooth stereo headset.

* Detachable stereo earpiece with

microphone.

* USB cable.

* User’s manual.

* 5VDC power adapter (Optional)

2 HEADSET FEATURES

1

Buttons : Increase Volume (V+).

2

Buttons : Decrease Volume (V-).

3

LED Indicator

7

4 Play/Talk Button : Answer call, Play music, Pause.

5

On/Off Button : Power on/off, End Call,Stop Music, Pairing.

6 Charging Port

7

Reverse Button: Reverse, Previous Song Title.

8

Forward Button: Forward, Next Song Title.

3 LED Indication and Definition

1. Stand-By Mode - Red LED flash in slow pace.

2. Pairing Mode - Blue and Red LED flash simultaneous.

3. PC Mode - Red LED flash regularly.

4. Mobile Mode - Blue LED flash regularly.

5. Battery Low - Red LED blinks about 2 seconds interval.

6. Charge Mode - Red LED stays solid without blinking.

4 CHARGE BATTERY AND RESET THE HEADSET

The headset comes with a build-in high capacity battery; please let the

battery be fully charged before first time use.

1. Connect the USB charging cable into the headset charging port (Fig.1).

The red LED stays ON continuously without blinking.

The unit will automatically switch to “ON” status regardless its status is

On or Off.

2. Once the battery has been fully charged, the red LED light will start to

blink.

8

5 Turn On / Off the Headset

5.1 To turn on: Press and hold the On/Off button

for around 1 second,

Both red and blue light will blink one time

simultaneous to indicate the headset is on.

The headset is now turned on and in stand-by mode.

The red LED light will blink continuously in stand-by

mode.

5.2 To turn off: Press and hold the On/Off button

for around 4 seconds.

The red LED light will blink 3 times then turn off.

6 CONNECT WITH PC/NOTEBOOK

6.1 Pair with your PC/Notebook

Pairing process is required before making connection with either PC or

Notebook device.

(1) Make sure your PC or Notebook has been installed Bluetooth driver first,

double click on the

Bluetooth icon

at the desktop or the right hand of task bar to enter the

setup window “IVT Corporation BlueSoleil – Main window”.

9

(2) Turn on the headset, press and hold on the On/Off Button briefly for

about 3 seconds.

(3) From “BlueSoleil” select “My Bluetooth” tab and select “Bluetooth

Device Discovery”.

(You may also press F5 for quick device search)

(4) Select and Right Click on “Stereo Headset (VX.XX.XX)” , then select

“Pair Device”.

(5) When “Bluetooth PIN Code Request” window comes up, enter the

default password “ 0000 ” and press OK.

10

(6) Once the password has been entered, a check mark will appear next to

the headset shape icon, which is the indication that the “Pairing process”

has been completed.

6.2 Play music with PC and Notebook

Once the pairing process is completed with the PC or Notebook device, do

the following to establish the connection:

First, right click on the “Stereo Headset (VX.XX.XX)” icon to display the

drop-down window.

Then, select “Refresh Services”.

11

Second, right click on the “Stereo Headset (VX.XX.XX)” icon to display the

drop-down window.

Then, select “Connect” to complete the connection.

Note:

After you have successfully paired and connected the headset with the target

device(s) for the first time, you may press the Play

button twice to activate

speed connection

.

However, you do have to complete these pairing sequences manually for the

first time.

You may listen to the audio through audio adapter or PC software such as

Window Media player or Real Player.

If you have followed these sequence but still not able to establish the

connection.

Please double check the steps or repeat the connecting sequence from

Section 6.

You may confirm the status of the connectivity between Stereo Headset and

PC by checking on the Audio tab under Sounds and Audio Devices

Property. “Bluetooth AV/HS Audio” will show under Sound Playback

section if the device has been properly connected.

In case your operation system does not automatically set with “Bluetooth

12

AV/HS Audio” at the Sound Playback section after being properly

connected, just select this option manually.

6.2.1 Button Functionality Under Music Mode

Play music, Pause

Stop music,Power off

Reverse, Previous Song Title.

Forward, Next Song Title.

Increase Volume (V+).

Decrease Volume (V-).

13

7. CONNECT WITH SKYPE

This headset offers a convenient solution to receive and dial out calls from

Skype remotely.

The following instructions will take you through the steps to connect with

Skype.

7.1 Configure audio gateway to work with Skype

1. Double click on the Bluetooth icon to activate IVT Corporation

BlueSoleil – Main window.

7.2 Pair Headset With PC

1. Turn on or reactivate the headset by pressing

icon.

Be sure to press the

key continuously until single red LED light is blinking

regularly with slow

beat, which indicates the headset is now under pairing mode.

2. From “BlueSoleil” select “My Bluetooth” tab and select “Bluetooth

Device Discovery”. (You may also press F5 for quick device search)

14

3. Select and Right Click on “Stereo Headset (VX.XX.XX)” , then select

“Pair Device”.

4. When “Bluetooth PIN Code Request” window comes up,

enter the default password “ 0000 ” and press OK.

5. Once the password has been entered, a check mark will appear next to the

headset shape icon, which is the indication that the “Pairing process” has

been completed.

15

Note: When “Paired” appears under the Additional Information column, it is

an indication that your headset has been successfully paired with PC.

7.3 Establish link between IVT software and Skype

1. Select “Bluetooth Human Interface Device Service”.

2. Right click on “Bluetooth Human Interface Device Service” first and

select “Connect” to activate.

3. Then, press continuously on the

key of the headset until a message

“Remote Device Stereo Headset (VX.XX.XX) has connected to my

Headset AG service!” show up at the lower right hand corner.

16

Now, the headset is ready in dialing/receiving position with Skype.

Now, the headset is ready in dialing/receiving

position with Skype.

4. Press

twice to turn off Skype.

5. Press continuously on the

key of the headset

to activate Skype again.

7.4 Configure Skype’s Settings

Few simple modifications need to be done before

you can connect this headset with Skype properly.

Please refer to the steps below to make the

changes.

1. Activate Skype from your computer.

(The following steps are based on Skype

Version 1.2.0.48)

2. Select “Tools” tab and select “Options”

3. Under Hotkeys tab, select and enable

the “Enable global hotkeys” option by placing

the check mark. Then, enable both the

“Answer call” and “Reject/Hang up call”

features by click on the Enable Hotkey tab.

17

4. Make sure the Hotkey value for “Answer call” is set as “Alt+PgUp”, and

“Reject/Hang up call” is set as “Alt+PgDn” in order to work properly.

(“Alt+PgUp” and “Alt+PgDn” is the default value of Skype.)

5. Under Sound Devices tab, change the default value of Audio In and

Audio Out to Bluetooth Audio.

6. Press Save to complete the setup.

7.5 Basic Operation within Skype Mode

Now, you are ready to use your Bluetooth headset to work with Skype. As a

prerequisite, Skype’s interface MUST remain as the ACTIVE WINDOW when

using your headset to control remotely.

1. Press on Play key

once to dial out or receive incoming calls.

2. Press

twice to turn off Skype.

3. Press continuously on the

key of the headset to activate Skype again.

4. Press on Forward key

for 3 seconds or press on Ctrl +Tab keys to

switch in between tabs under Skype environment.

(Make sure Skype’s “Contact tab” remains as the ACTIVE window.)

5. Switch between

and keys to rotate between contact names under

the Contact tab, and press on Play key

to initiate the call. The cursor

must not stay in the INPUT Box

area

in order to let your headset control Skype remotely.

(Make sure Skype’s “Contact tab” remains as the ACTIVE window.)

18

6. Press on Play key once to dial out after you entered the numbers at

the INPUT Box or by the number pad.

INPUT Box

Note:

Under Skype you may also listen to music on the side, but it is set under

“Mono Tone” and without

remote control function because the controlling priority has been preserved

for Skype’s functionality.

8. Link with Mobile Phone

Before headset connecting to your mobile phone you need to do their

PAIRING procedures first. PAIRING is a Bluetooth function that Bluetooth

devices can remain constant link to designate device.

19

Note:

This headset is not comprehensive support to all models of

Bluetooth mobile phone.

Please make sure with your dealer if it supports connection to

your mobile phone or not.

The following PAIRING procedure is taking one of mobile phone as an

example; other mobile phones may have different but similar PAIRING

procedures.

8.1 PAIRING

Step 1

Turn off the headset and turn on again before

initiating the pairing.

Please refer to Sec. 5 for the turn off/on

operations

Step 2

Turn on your mobile phone and find the Setup

manual in your mobile phone.

Step 3

Move cursor keys to Connection item, press

“confirm” button to select it.

Step 4

When Bluetooth item screen comes out,

press “confirm” button to select it.

Page is loading ...

X-Micro XBT-DG3X User manual

This manual is also suitable for

X-Micro XBT-DG3X User manual

in other languages

Other documents