SHENZHEN QI SHENGLONG INDUSTRIALIST Y56QSLHD276 User manual

Type
User manual
HD-276 Portable Bluetooth Headset User's Manual
1.
Features
and
Function
Size( mm)
2. Using
. Long press the button for 4 seconds, till the led flick blue and red, it will come to pairing model.
. When pairing, if need put the code, please put “0000”, there will be one sound “Dong”, it means it
paired succeed, can connect.
. For connected device, long press it 2-3 seconds, it will turn on, and re-connected with the paired
device.
. When it is connected, press the play/pause button to receive the calling.
. When the Bluetooth connected the phone, quick press play/pause button twice, it can recall the
last number
. When the USB charging, the red led light will on, after it is full, the led light will off.
Micro USB
麦克风小孔
LED
Blue,Red
light
Back/Volume
down-
call/hang
Next/Volume
up+
2
3. Products Features
Battery3.7V 85mAH
VoltageDC 5V charging time 2 H
Music play time4
Speaker:φ40 32Ω30mW
4. Frequency and Distance
Distance: >=10M ( free condition)
Frequency2.402-2.480 GHz
5. FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
  • Page 1 1
  • Page 2 2

SHENZHEN QI SHENGLONG INDUSTRIALIST Y56QSLHD276 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI