Contec CPSN-DI-16BCL Reference guide

Brand: Contec

Model: CPSN-DI-16BCL

Type: Reference guide

Reference Manual

(Hardware)

CONTENTS

Digital Input Module 16ch, Built-in power supply

CPSN-DI-16BCL

Introduction .................................................................. 4

Safety Precautions .................................................... 10

Product Nomenclature and Function ............... 16

Installation ................................................................... 23

Appendix ...................................................................... 39

Optional Products .................................................... 44

Customer Support and Inquiry ............................ 46

Index .............................................................................. 48

— 2 —

Table of Contents

Introduction ....................................................................... 4

1. Related Manuals ......................................................................................................................................................5

2. Check the Firmware Version ...............................................................................................................................6

3. About the Product ..................................................................................................................................................7

4. Features ......................................................................................................................................................................8

5. Product Configuration List ..................................................................................................................................9

Safety Precautions ........................................................... 10

1. Safety Information ............................................................................................................................................... 11

2. Handling Precautions ......................................................................................................................................... 12

1. FCC PART15 Subpart B Class A Notice .................................................................................................. 15

2. CE EMC Directive Class A Notice ............................................................................................................ 15

Product Nomenclature and Function ............................ 16

1. Nomenclature of Product Components ..................................................................................................... 17

2. Description of Product Components ........................................................................................................... 18

1. LED Indicator ................................................................................................................................................... 18

2. Digital Input Connector .............................................................................................................................. 19

3. Switching Switch ............................................................................................................................................ 20

3. Other Functions .................................................................................................................................................... 21

1. Digital Filter ..................................................................................................................................................... 21

2. Interrupt Control Function ........................................................................................................................ 22

3. Counter Function .......................................................................................................................................... 22

Installation ........................................................................ 23

1. Install the Product ............................................................................................................................................... 24

1. Installation Conditions ................................................................................................................................ 24

2. Installing and Removing I/O Module and Blank Panels ................................................................ 27

2. Derating ................................................................................................................................................................... 28

1. Derating By the Number of Inputs ......................................................................................................... 28

3. Connecting to an External Device ................................................................................................................. 30

4. Cable Connection ................................................................................................................................................ 31

1. Digital Input..................................................................................................................................................... 31

2. Digital Input (DI) ............................................................................................................................................ 33

Appendix .......................................................................... 39

1. Specifications......................................................................................................................................................... 40

2. Physical Dimensions ........................................................................................................................................... 42

3. The Details of Model Name............................................................................................................................. 43

— 3 —

Table of Contents

Optional Products ............................................................ 44

1. Optional Products................................................................................................................................................ 45

Customer Support and Inquiry ...................................... 46

1. Services .................................................................................................................................................................... 47

Index .................................................................................. 48

— 4 —

Introduction

This section provides necessary information of the product

such as the outline, bundled items and manuals before

actual use.

—

Introduction

—

CPSN-DI-16BCL Reference Manual (Hardware)

— 5 —

1. Related Manuals

The manuals related to the product are listed below.

Read them as necessary along with this document.

 Must Read the Following Manuals.

Name

Purpose

Contents

How to get

Product Guide

Must read this after opening the

package.

This lists the product configuration

and describes the precautions.

Included in the package

(Printed matter)

Reference Manual for I/O

Module (Hardware)

Read this when operating the

I/O module with CPU Unit.

This describes the hardware aspects

such as functions and settings of the

I/O module.

Download from

the Contec

website (PDF)

CPU unit Reference

Manual (Hardware)

Read this when operating the

product.

This describes the hardware aspects

such as functions and settings.

Download from

the Contec

website (PDF)

CPU unit Reference

Manual (Software)

Read this when setting up the

"CONPROSYS nano WEB

Setting"

This describes how to set each

function of "CONPROSYS nano WEB

Setting".

Download from

the Contec

website (PDF)

 Download Manuals

Download the manuals accordingly from the following URL.

Download

https://www.contec.com/download/

—

Introduction

—

CPSN-DI-16BCL Reference Manual (Hardware)

— 6 —

2. Check the Firmware Version

Before start using the product, visit our website to check the firmware version and update to the

latest one if necessary.

Updating firmware to the latest version will resolve troubles and stabilize the operation.

Download

https://www.contec.com/download/

Refer to the "Reference Manual (Software)" for the details of the firmware updating.

—

Introduction

—

CPSN-DI-16BCL Reference Manual (Hardware)

— 7 —

3. About the Product

This product is an expansion I/O module that adds an opto-coupler isolated input interface with a

response speed of 200 μs or less to the CPU unit of the CONPROSYS nano series.

The product is equipped with 16 inputs and 1 common that support current sink/source output, and

the internal circuit power supply of 12V and the external circuit power supply of 12-24V can be

switched with the switch.

—

Introduction

—

CPSN-DI-16BCL Reference Manual (Hardware)

— 8 —

4. Features

 Opto-coupler isolated input

The product contains 16 channels of opto-coupler isolated input whose response speed is 200µsec or less. Also, current sink outputs

and current source outputs are switchable with the switch.

 Internal circuit power supply and external power supply

The switch is equipped to switch between the internal circuit power supply of 12V and the external circuit power supply of 12-24V.

 All of the input signals are usable as interrupt events

You can use all of the input signals as interrupt events and also disable or enable the interrupt in bit units and select the interrupt edge.

 Equipped with a digital filter function to prevent false

recognition of input signals due to noise and chattering

This product is equipped with a digital filter that can prevent input signal noise and chattering. The input digital filter can be applied to

all input terminals individually, and configuration can be performed using the software.

 Input counter function

Digital input and counter input can be switched per channel. The counter values are automatically saved upon turning off the power.

 Easy installation and removal

This product can be installed in and removed from the CPU unit without any tools.

 Adaptable to a wide range of temperature between -20

and +60°C

The product is capable of operating in the temperature between -20 and + 60°C. It can be installed in the various environments.

 Equipped with the LED for an operation check

The product has the LED for an operation check, which helps you visually confirm the communication status of each interface.

—

Introduction

—

CPSN-DI-16BCL Reference Manual (Hardware)

— 9 —

5. Product Configuration List

The product consists of the items listed below.

Check, with the following list, that your package is complete.

If you discover damaged or missing items, contact your retailer.

Product…1

Product Guide & Warranty

Certificate…1

Serial Number Label…1

— 10 —

Safety Precautions

Understand the following definitions and precautions to

use the product safely.

Never fail to read them before using the product.

—

Safety Precautions

—

CPSN-DI-16BCL Reference Manual (Hardware)

— 11 —

1. Safety Information

This document provides safety information using the following symbols to prevent accidents

resulting in injury or death and the destruction of equipment and resources.

Understand the meanings of these labels to operate the equipment safely.

DANGER

DANGER indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury.

WARNING

WARNING indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION

CAUTION indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury or in property damage.

—

Safety Precautions

—

CPSN-DI-16BCL Reference Manual (Hardware)

— 12 —

2. Handling Precautions

DANGER

 Do not use the product in locations exposed to a flammable or corrosive gas. It may cause

explosion, fire, electrical shock, or malfunction.

 Do not allow the device to come into contact with foreign substances (metal particles,

flammable substances, liquids, etc.) Otherwise, it can cause fire or electrical shock.

 Do not place the product in an unstable location or use incomplete mountings. Otherwise, it

may cause the device to fall.

 Be sure to connect the product to the stipulated power supply voltage. Connecting to a

different voltage might cause a fire or electrical shock.

 If the product is used in a manner not specified by the manufacturer, the protection provided

by the equipment may be impaired.

 The product is not intended for use in aerospace, space, nuclear power, medical equipment,

or other applications that require a very high level of reliability. Do not use the product in

such applications.

 If using the product in applications where safety is critical such as in railways, automotive, or

disaster prevention or security systems, please contact your retailer.

CAUTION

 Be certain the following requirements are satisfied when using the product.

- Indoor use

- Altitude up to 5000m

- Applicable POLLUTION DEGREE 2

When using the product at high altitudes, refer to the relational expression below to find an

appropriate ambient temperature. The heat dissipation decreases due to air pressure drop

and could lead to damages or a shorter product life.

- Ambient temperature = 60[°C] - 0.005 x altitude [m]

An Example)

The product is used at 3000 meters

60°C - (0.005 x 3000m) = 45°C (Ambient temperature)

 Do not use or store the product in a location exposed to extremely high or low temperature

that exceeds range of specification or susceptible to rapid temperature changes.

e.g. - Exposure to direct sun

- In the vicinity of a heat source

 Do not use the product in extremely humid or dusty locations. It is extremely dangerous to

use the product with its interior penetrated by water or any other fluid or conductive dust. If

—

Safety Precautions

—

CPSN-DI-16BCL Reference Manual (Hardware)

— 13 —

the product must be used in such an environment, install it on a dust-proof control panel, for

example.

 Avoid using or storing the product in locations subject to shock or vibration that exceeds

range of specification.

 When transporting the product, take suitable measures to avoid applying shock or vibration

directly to the product.

This product conforms to JIS Z0200: 1999 and JIS Z0232: 2004.

 Use the product in the specified operating condition (temperature, humidity, vibration and

shock).

 Avoid installing in the place where ventilation of the product may compromise. Insufficient

aeration could heat up the product and lead to malfunctions or damages.

 Do not use the product in the vicinity of devices that generate strong magnetic force or noise.

Such products will cause the product to malfunction (stop, reboot).

 Do not use or store the product in the presence of chemicals.

 When removing connectors or cables, always unplug the power cables of the CPU unit first,

and confirm the LEDs are turned off.

 Do not modify the product. CONTEC will bear no responsibility for any problems, etc.,

resulting from modifying the product.

 In the event of failure or abnormality (foul smells or excessive heat generation), unplug the

power cables of the CPU unit immediately and contact your retailer.

 Use a grounded, shielded cable to connect with peripherals.

 To clean the product, wipe it gently with a soft cloth dampened with either water or mild

detergent. Do not use chemicals or a volatile solvent, such as benzene or thinner, to prevent

the paint to be scraped or discolored.

 When connecting connectors, first check the shapes of connectors, and then insert them in

the correct orientation. After they are connected, do not put too much load on the connected

part. Doing so may result in poor contact or damage to the product and the connected part.

 Do not touch metal parts or terminals with your hands when the product is in operation.

Otherwise, the product may malfunction, or cause failure.

 Do not touch the front panels with your hands when the product is in operation. Otherwise,

the product may malfunction or cause failure.

 Do not touch the product or connectors with a wet hand to avoid electric shock.

 The specifications of the product are subject to change without notice for enhancement and

quality improvement. Even when using the product continuously, be sure to read the manual

in the CONTECs website and understand the contents.

 When the product is used in a place that is affected by overcurrent or overvoltage (lightning

surge), select appropriate surge protection device for all of the route (Signal line, Power line,

Earth etc.). Consult with the specialist regarding selecting, purchasing, and setting the surge

protection device.

 The product is an open-type device (a device designed to be housed inside other equipment)

and must always be mounted inside a mechanical enclosure having enough strength.

—

Safety Precautions

—

CPSN-DI-16BCL Reference Manual (Hardware)

— 14 —

 Do not strike or bend this product. Otherwise, this product may malfunction, overheat, cause

a failure or breakage.

 Do not touch this products metal plated termi nals (edge connector) with your hands.

Otherwise, this product may malfunction, overheat, or cause a failure.

If the terminals are touched by someones hands, clean the terminals with industrial alcohol.

 Always install the blank panels into vacant slots while power is active.

 Regarding "CE EMC Directive Notice".

Please connect the Interface Connector with a shielded cable to meet the mentioned standard

above.

 Use the product in accordance with the described installing method, conditions, and

specifications. If the product is used outside the specified range, the protection performance

of this product will be impaired.

 When disposing of the product, follow the disposal procedures stipulated under the relevant

laws and municipal ordinances.

 Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever

(Including damages for loss of business profits) arising out of the use or inability to use this

CONTEC product or the information contained herein.

—

Safety Precautions

—

CPSN-DI-16BCL Reference Manual (Hardware)

— 15 —

1. FCC PART15 Subpart B Class A Notice

NOTE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own

expense.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance

could void the users authority to operate the equipment.

2. CE EMC Directive Class A Notice

EN55032 Class A Notice

Warning:

Operation of this equipment in a residential environment could cause radio interference.

— 16 —

Product Nomenclature

and Function

This section describes product component names and their

functions, pin assignment of each connector.

—

Product Nomenclature and Function

—

CPSN-DI-16BCL Reference Manual (Hardware)

— 17 —

1. Nomenclature of Product Components

Component names of the product are shown in the figure below.

No.

Name

Function

LED Indicator

Displays the digital input status.

Interface Connector

This is a connector for digital input.

Power Supply Switching Switch

Use this switch to switch between the internal circuit power supply

and the external circuit power supply.

Output Type Switching Switch

Sink Output or Source Output: Use this switch to switch the output

types.

—

Product Nomenclature and Function

—

CPSN-DI-16BCL Reference Manual (Hardware)

— 18 —

2. Description of Product Components

Components such as connectors, switches are described.

1. LED Indicator

When all the digital inputs are OFF, the LEDs all turn off. The hexadecimal value (0x0000) can be

obtained with the software. When all the digital inputs are ON, the LEDs all turn on. The hexadecimal

value (0xFFFF) can be obtained with the software. The lowest-order bit corresponds to DI00, and the

highest-order bit corresponds to DI17.

Color and Description

LED

Color

Display

Description

DI00 - DI07

DI10 - DI17

Green

It lights up upon inputting.

OFF

It indicates there in no inputting or the CPU unit is powered off.

—

Product Nomenclature and Function

—

CPSN-DI-16BCL Reference Manual (Hardware)

— 19 —

2. Digital Input Connector

This product has 16 channels of digital input. Connect with the 20-pin MIL connector.

Connector used on the product: XG4A-2034 (OMRON)

Compatible connector type: XG4M-2030 (OMRON)

Pin Assignment

Pin No.

Signal Name

Description

1, 2 PCOM

When connecting to sink output, connect these pins to the positive side of

the external circuit power supply.

There is one common for all inputs of DI00 - DI07 and DI10 - DI1.

When external circuit power supply and source output are set, they are left

unconnected (N.C).

3, 4 MCOM

When connecting to source output, connect these pins to the negative side

of the external circuit power supply.

There is one common for all inputs of DI00 - DI07 and DI10 - DI1.

When external circuit power supply and sink output are set, they are left

unconnected (N.C).

6, 8, 10, 12,

14, 16, 18, 20

DI00 - DI07

This indicates the input signals. It connects the output signals from the

other devices.

5, 7, 9, 11,

13, 15, 17, 19

DI10 - DI17

This indicates the input signals. It connects the output signals from the

other devices.

—

Product Nomenclature and Function

—

CPSN-DI-16BCL Reference Manual (Hardware)

— 20 —

3. Switching Switch

The product has switches to switch between internal and external circuit power supplies, and also

between sink and source outputs.

Switch

Description

Power Supply Switching

Switch

Use this switch to switch between the internal and external circuit power

supplies.

I: Use the internal circuit power supply of 12V. (INTERNAL, Factory settings.)

E: Use the external circuit power supply. (EXTERNAL)

Output Type Switching Switch

Use this switch to switch the output types.

SI: Sink output (SINK, Factory settings.)

SO: Source output (SOURCE)

The signals on the interface connector change as listed below according to the switch setting

Power Supply Switching

EXTERNAL

INTERNAL

Output Type Switching

SINK

SOURCE

SINK

SOURCE

Pin No.

1, 2

PCOM

N.C.

PCOM

3, 4

N.C.

MCOM

Page is loading ...

Contec CPSN-DI-16BCL Reference guide

Contec CPSN-DI-16BCL Reference guide

Contec CPSN-DI-16BCL Reference guide

Related papers

Other documents