PAC BKBMWPOC Operating instructions

PAC
Brand
PAC
Model
BKBMWPOC
Type
Operating instructions

This manual is also suitable for

©2018 AMERICAN INTERNATIONAL INDUSTRIES, INC.
BMW POC Mounting Kit
BMW
2006-11 3 SERIES
(without OEM Navigation)
2012-13 3 SERIES Non Sedan (without OEM Navigation)
VEHICLE APPLICATIONS
TECH Ver. 03/18 PRINT Ver. 03/18
www.aampglobal.com www.aius.net
2500 East Francis Street Ontario, CA 91761, U.S.A.
Sales: (800) 477-2267
Intl: (727) 572-9255
Support: 888-228-5560
iBMWPOC
2 3
1. Using a soft tool, carefully pry the console starting from the back.
2 Unsnap the shifter boot panel.
3. Unplug CLA connector (no longer used) and fully remove the console.
4. Unscrew (4) T10 Torx screws securing the pocket /ash tray and remove
the assembly.
5. Unsnap and remove the switch bank from the factory dash panel.
CENTER CONSOLE DISASSEMBLY INSTRUCTIONS
1. Insert switch bank removed from disassembly into the rear opening
of the BMWPOC.
2. Install the switch bank hold down bracket on rear of the switch panel using
the (4) Phillips screws provided.
3. Insert USB or USB cover into the BMWPOC main frame.
POCKET ASSEMBLY INSTRUCTIONS
1. Screw (4) T10 Torx screw back to secure the BMWPOC assembly into the console.
2. Place the console back into position while making sure the switch bank harness
goes out thru the left side of the console. (Optional) install and route USB Port.
POCKET INSTALLATION INSTRUCTIONS
  • Page 1 1
  • Page 2 2

PAC BKBMWPOC Operating instructions

PAC
Brand
PAC
Model
BKBMWPOC
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents