Hagerco 2909 - 2A Modular Access Control Power Supply Installation guide

2-679-0705 16 Amp Power Booster

Installation Instructions

I-EA00142

Rev -, Rev Date: 01/09/15

Always visit www.hagerco.com for the latest Installation Instructions

HAGER COMPANIES 139 Victor Street, St. Louis, MO 63104 • (800) 325-9995

N/O

ACCESS

CONTROL

FAIL SECURE

LOCK 1

FAIL SECURE

LOCK 2

RELAY

Power Booster

2 1

POWER

INPUT

ELECTRICAL DATA

24vdc Input Voltage.

85mA Idle current draw.

Dry N/O trigger input ONLY.

2 – Fail safe only outputs.

16A Surge output.

1A Continuous output.

Size: 3.25” (83mm) W x 2.00” (51mm) H.

Works with Hager 2909 Power Supply. Requires 1 Module space.

Supplied with mounting screws and standoffs for J-box mounting.

The Hager 2-679-0705 power booster is an

installer friendly module designed to work with

electronic devices that have a high surge current

draw such as the Hager 4500/4600 ELR Electric

Latch Retraction.

Operation

When N/O access control input is activated, the relay will

activate and send up to 16 amps inrush to either output.

If the access control input remains closed the power booster

can continue sending up to 1 amp to the load for operations

such as electric dogging.

Page 1 of 1