1. Scrub Clean & let dry 2. Apply Ipe Oil
TM
3. Wipe off excess
Protect Your Deck with Ipe Seal™
Ipe Seal™ is a wax emulsion sealer proven to increase the
structural integrity of hardwood decking. Once applied
to freshly cut, exposed wood end grain, Ipe Seal™ creates
a bond that extends the life of each deck board while also
preventing splits (end checking) and unsightly cracks.
Easy Application, Exceptional Results - Easy As 1,2,3
SHAKE, STIR & MIX WELL • Questions/Comments: www.DeckWise.com
1
Simple Application, Exceptional results.
Treated with IPe Oil
TM
Untreated IPE Decking
1 QUART 5 GALLONS
1 quart per 500 sq ft of deck.
Ipe Oil™ Hardwood Deck Finish is an oil-
based natural wood nish. It is specically
formulated, using trans-oxide pigments, to
protect and preserve the natural beauty of
exterior hardwood decks. Ipe Oil™ Hardwood
Deck Finish provides excellent penetration
of even the densest hardwoods with minimal
raising of the grain. It protects and conditions
the wood while maintaining a completely
natural appearance. For exceptional results
on Ipe, Tigerwood, Cumaru and other exotic
hardwoods, Ipe Oil™ is the best solution.
1 Gallon covers approx. 250-300 S.F.
Exclusive products of DeckWise®, e Ipe Clip® Fastener Co. LLC.
Local: 941.896.9851 Toll Free: 1.866.427.2547