DeckWise IPE-SEAL-1-QT Operating instructions

Brand
DeckWise
Model
IPE-SEAL-1-QT
Type
Operating instructions
PROTECT
YOUR
Manufacturers of
hidden deck fasteners
& accessories
INVESTMENT
Untreated WOOD END GRAIN
SEALED with IPe SEAL
TM
Ipe Seal™ is a wax emulsion sealer proven to increase the structural integrity of
hardwood decking. Once applied to freshly cut, exposed wood end grain, Ipe Seal™
creates a bond that extends the life of each deck board while also preventing splits
(end checking) and unsightly cracks.
1. Scrub Clean & let dry 2. Apply Ipe Oil
TM
3. Wipe off excess
Easy Application, Exceptional Results - Easy As 1,2,3
SHAKE, STIR & MIX WELL • Questions/Comments: www.DeckWise.com
1
1 QUART 5 GALLONS
1 quart per 500 sq ft. of lumber.
Exclusive products of DeckWise®, e Ipe Clip® Fastener Co. LLC.
Local: 941.896.9851 Toll Free: 1.866.427.2547
Protect Your WOOD with Ipe Seal™
APPLICATION
Always clean dirty wood end grain
before applying Ipe Seal™. Apply a
liberal even coating to the end grain
of the wood. Brush from the bottom
upwards on deck boards and apply
liberally on log ends. orough,
complete coverage of the end grain
will maximize the benets for
your lumber.
nish strong with ipe oil™
2
3
  • Page 1 1
  • Page 2 2

DeckWise IPE-SEAL-1-QT Operating instructions

Brand
DeckWise
Model
IPE-SEAL-1-QT
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents