Danfoss EPU 2370 User guide

Brand: Danfoss

Model: EPU 2370

Type: User guide

User guide

EPU 2370

VI.72.L3.02

f) Position selector

Position selector is used for

showing actual temperatures and

for setting required temperatures -

see paragraph "temperature setting"

in instruction.

Actual temperature (room or

flow temperature)

T

Required normal temperature.

Use (+) and (-) buttons for

changing this temperature.

T

Required reduced temperature.

Use (+) and (-) buttons for

changing this temperature.

g) Function switch

Control is cancelled.

Constant reduced temperature

Automatic changeover

between normal and reduced

temperature according to time

switch settings

Constant normal temperature

Manual control. Use buttons

(+) and (-) for manual valve

control

h) User guide

User guide can be kept in the slot

below the time switch.

a) Time switch

Analog time switch is set in the

required normal and reduced

temperature periods in pushing

riders for reduced temperature

settings towards the center of the

time switch.

Set actual time and week day vis-a-

vis the arrow in turning the dial

clockwise.

Digital time switch ECA 9018, see

enclosed user guide.

b) Light indication

- constantly alight when controller

is operating

- flashes when receiving alarm

signal (sensor error or frost risk).

Set position selector in

and

push (+) botton for 5 sec. to read

off alarm code (see instruction)

c) Display

Display shows status, actual and

calculated temperatures.

d) and e) push buttons (+) and (-)

Used for changing temperatures

and settings - see f)

1

Danfoss EPU 2370 User guide

Brand: Danfoss

Model: EPU 2370

Type: User guide

Download PDF

Related papers

Other documents