StyleWell HS202006-34BLK, HS202006-34WTE User guide

  • Hello! I'm your chat assistant, and I've reviewed the user guide for the StyleWell 71-inch wood 5-shelf bookcase, models HS202006-34WTE and HS202006-34BLK. This guide includes detailed assembly steps, tools needed and safety recommendations, including how to secure the bookcase to the wall. I'm ready to assist you with any questions you have about the bookcase.
  • What tools are required for assembly?
    What should I do if there are missing parts?
    How can I secure the bookcase to the wall?
6-14
Weight Limits 15
16
16
16
Package Included
ׇ
׎
׎
׈
׎
׉
׊
׊
׌
׋
א
׍
׏
PANELS INCLUDED
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Cover
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Ĺ
׉׍
ķ
׉
׍
Bottom panel and Bottom front rail assembly
ĸ
Ĺ
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
ĸ
Ĺ
ĸ
׋׌
׋
׌׍
׉
Left & Right side panel assembly
ķ
ĸ
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
׈
׈
Reverse side
ĸ
ĸ
ķļ
ĸ
׈
׋
׌
Fixed panel assembly
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
r
Ļ
Lower back panel assembly
א
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
ķ
ļ
׊
׊
׈
Upper side panel assembly
Ĺ
׊;
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
ׇ
׊
׊
ׇ
Top panel assembly
ĸ
ķ
ļ
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
r
Ļ
׏
Upper back panel assembly
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
ĺ
׎
׎
׎
׊
׊
׋
׌
Adjustable shelf assembly
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Fasten strap to back panel Fixing to wall
For walls constructed of wood with drywall
-with a pencil mark location of holder position
-Drill pilot hole using a 1/8 inch drill bit 2 inches deep
-Attach holder to wall using the 1 inch screw provided
For walls constructed of concrete
-with a pencil mark location of holder position
-Drill pilot hole using a 1/4 inch drill bit 2 inches deep
-Using a rubber mallet or hammer insert wall anchor
into predrilled hole
-Attach holder to wall anchor using 1 inch screw provided
Ask local hardware store for proper
hardware if your wall is constructed
of materials not as listed
7b
7c
7a
7e 7a 7b 7d
Wall
/