Sunsky RD03 User manual

Type
User manual

Sunsky RD03 is a versatile device that allows you to monitor your surroundings in various ways, including local mode and networking. With local mode, you can manually record files and view videos/photos, while networking enables remote viewing and control. The device supports 2.4G WiFi bands and has a built-in speaker and microphone for two-way communication. Additionally, it offers PTZ functions, allowing you to pan, tilt, and zoom the camera remotely. It also supports SD card storage for continuous loop video recording.

Sunsky RD03 is a versatile device that allows you to monitor your surroundings in various ways, including local mode and networking. With local mode, you can manually record files and view videos/photos, while networking enables remote viewing and control. The device supports 2.4G WiFi bands and has a built-in speaker and microphone for two-way communication. Additionally, it offers PTZ functions, allowing you to pan, tilt, and zoom the camera remotely. It also supports SD card storage for continuous loop video recording.

Download and install JXLCAM. IOS searches for "JXLCAM" download directly
at the Apple App Store. For convenience, please scan the download and installation
of the QR code below.
Note: during installation, all permissions of the JXLCAM APP need to be
allowed, otherwise the APP will not work properly.
1..
Please select APP to download
iPhone selection
Note: when there is no WIFI in the environment, you can use AP mode to connect,
which is valid for no more than 10m, which can achieve localized video viewing.
Open the list of mobile phones WIFI, connect to ACCQ..., open the APP
page after success, click "AP" as shown in the figure below, and watch the video.
2.
1.First confirm that there is a available WIFI near the device, turn on the
device, flash the blue indicator light quickly, and the device is in a state to be
connected. ( Note: WIFI signals supported only in the 2.4G band)
2.You can't successfully distribute the network when the power is insufficient.
3.When wiring, please try to bring the device close to the router. When the
nearby WIFI signal is weak, the image will be stuck if the network is not
successful or the network is successful.
4.Open the APP and follow these steps:
3.
ķClick“+”  ĸClick "AP add Device"
ŊClick "···"
ĺ
Click
4FUUJOHT
Ļ.Click "WLAN"
ĽEnter the correct WIFI password and click
ĀNextā
ōSelect to connect your 2.4G band
WIFI, and then click JXLCAM in the
upper left corner to return to the APP.
ľ.Click "..."
ĿClick Ā6ettLngsāŀClick“WLAN”
Connect to the device hotspot
"ACCQ..." Then click JXLCAM in the
upper left corner to return to APP.
Click“Add Device”
Wait for distribution network.
Customizable name, clickĀnextā
After seeing the success of the
distribution network, click“Next” .
You can view the camera preview
page on the home page.
SD card playback file
Device nickname
Networking status Manually record files
4.
Local mode Add the device
View videos/photos in local mode.
1IPUP 3FDPSEJOH
Landscape
switching
-JTUFO
5BML
Products with speakers can be used
Sharpness
switch
Note: PTZ function is
only applicable to
shaking head products,
some products do not
support this function
When the device fails to con¿gure the network, please check whether the router
and WiFi password are con¿gured correctly (the device does not support WIFI
signals in the 5.8G band). After con¿rming that it is correct, you can press and
hold the reset button until the device indicator Àashes quickly, restore the
factory settings, and recon¿gure network.
If you need to store video content, you need to install an SD card.
˄This machine supports loop video recording˅
5.
Indicator light ON/OFF
Switch left
and right
Infrared lamp ON/OFF
Switch up
and down
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Sunsky RD03 User manual

Type
User manual

Sunsky RD03 is a versatile device that allows you to monitor your surroundings in various ways, including local mode and networking. With local mode, you can manually record files and view videos/photos, while networking enables remote viewing and control. The device supports 2.4G WiFi bands and has a built-in speaker and microphone for two-way communication. Additionally, it offers PTZ functions, allowing you to pan, tilt, and zoom the camera remotely. It also supports SD card storage for continuous loop video recording.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages