Gator msk5924 Installation guide

msk5924
Gator
Brand
Gator
Model
msk5924
Type
Installation guide

Gator MSK5924: 14 Main Studs, Nuts, and Washers to Upgrade Your 5.9L 24V Cummins Diesel's Fastening System. This performance main stud kit enhances the stability and reliability of your engine by replacing the factory bolts with high-strength studs and nuts. Experience improved clamping force and reduced risk of cylinder head gasket failure. Installation requires basic tools and involves cleaning the threads, lubricating the studs and washers, and following a specific torque sequence in three steps.

Gator MSK5924: 14 Main Studs, Nuts, and Washers to Upgrade Your 5.9L 24V Cummins Diesel's Fastening System. This performance main stud kit enhances the stability and reliability of your engine by replacing the factory bolts with high-strength studs and nuts. Experience improved clamping force and reduced risk of cylinder head gasket failure. Installation requires basic tools and involves cleaning the threads, lubricating the studs and washers, and following a specific torque sequence in three steps.

Gator Fasteners Performance Main Stud Kit
Fits: Dodge 1998.5 - 2007 5.9L 24V Cummins Diesel • Part Number: MSK5924
Parts Included: Tools Needed:
(14) Main Studs •Socket Set
(14) Main Stud Nuts •Torque Wrench
(14) Main Stud Washers •Thread Chaser
(1) Assembly Lube - M12 x 1.5 (item # TCCM12x1.5)
Please Read Instructions before starting installation. If you don’t feel condent that
you can complete this task, do not start it and seek professional help!
q These instructions only cover the installation and torque sequence/technique of the Main Stud Kit.
q Clean and inspect the Studs and Nuts to ensure they are free of shipping damage and obvious defects.
q Clean all threads in the block. It is recommended to use a Thread Chaser on the threads of the block so that they
are completely clean to ensure proper thread engagement and accurate torque reading.
q Lubricate the threads of the Main Studs and install them into the block. (HAND TIGHT ONLY) If one is taller,
remove the stud, clean the threads in the block and re-install.
q Install the main caps and check for binding or misalignment.
q Install the Main Stud Washers onto the Main Studs.
q Lubricate the Main Stud threads and the top of the Main Stud Washers with Assembly Lube.
q Lubricate the mating face and threads of the Main Stud Nuts with Assembly Lube.
q Follow the torque specications below to tighten the nuts in three steps.
• Step One - 40 ft-lbs
• Step Two - 80 ft-lbs
• Step Three - 125 ft-lbs
Gator Fasteners Performance Main Stud Kit for 5.9L 24V Cummins Instructions • December, 2021 (Page 1 of 2)
Fasteners
Gator Fasteners Performance Main Stud Kit for 5.9L 24V Cummins Instructions • December, 2021 (Page 2 of 2)
Disclaimer and Liabilities
Seller disclaims any responsibility/ liability for improper, incorrect, or inexperienced installation of products by the
purchaser or installer resulting in damage or loss. Buyer afrms by purchase of this product that it is t for intended use and
accepts all liability. Buyer afrms products are used at buyers own risk and accepts full responsibility.
dF
FOLLOW US
TAG US #GATOR #GATORFASTENERS #NOTHINGBITESLIKE
WWW.GATORFAsTENERS.COM
@GATORFASTENERS
  • Page 1 1
  • Page 2 2

Gator msk5924 Installation guide

msk5924
Gator
Brand
Gator
Model
msk5924
Type
Installation guide

Gator MSK5924: 14 Main Studs, Nuts, and Washers to Upgrade Your 5.9L 24V Cummins Diesel's Fastening System. This performance main stud kit enhances the stability and reliability of your engine by replacing the factory bolts with high-strength studs and nuts. Experience improved clamping force and reduced risk of cylinder head gasket failure. Installation requires basic tools and involves cleaning the threads, lubricating the studs and washers, and following a specific torque sequence in three steps.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents