Gator HSK6265 User manual

Type
User manual

Gator HSK6265 is a performance head stud kit designed specifically for Chevy/GMC 6.2L & 6.5L Diesel engines, manufactured between 1982 and 2000. This kit provides a reliable and secure solution for high-performance applications, ensuring optimal cylinder head sealing and preventing potential leaks or failures. With its comprehensive set of components, including head studs, nuts, washers, assembly lube, thread sealant, and a thread chaser, the Gator HSK6265 kit offers a complete solution for upgrading and enhancing your engine's performance.

Gator HSK6265 is a performance head stud kit designed specifically for Chevy/GMC 6.2L & 6.5L Diesel engines, manufactured between 1982 and 2000. This kit provides a reliable and secure solution for high-performance applications, ensuring optimal cylinder head sealing and preventing potential leaks or failures. With its comprehensive set of components, including head studs, nuts, washers, assembly lube, thread sealant, and a thread chaser, the Gator HSK6265 kit offers a complete solution for upgrading and enhancing your engine's performance.

Gator Fasteners Performance Head Stud Kit
Fits: Chevy/GMC (1982-00) 6.2L & 6.5L Diesel • Part Number: HSK6265
Parts Included: Tools Needed:
(34) Head Studs •12pt Socket Set
(34) Head Stud Nuts •Torque Wrench
(34) Head Stud Washers •Solvent (ie: Brake Cleaner or Lacquer Thinner)
(1) Assembly Lube •Thread Sealant
•Thread Chaser
- M12 x 1.75 (item# TCCM12x1.75)
Please Read Instructions before starting installation. If you don’t feel condent that
you can complete this task, do not start it and seek professional help!
q These instructions only cover the installation and torque sequence/technique of the Head Stud Kit.
q Clean and inspect the Studs, Washers, and Nuts to ensure they are free of shipping damage and obvious defects.
q The Head Studs need to be cleaned with solvent to remove the rust inhibitor so the thread sealant will seal to the
studs.
q Clean all threads in the block. It is recommended to use a Thread Chaser on the threads of the block to ensure
they are completely clean.
q Apply Thread Sealer to the threads of the Head Studs and install them into the block. Be sure to only screw them
in HAND TIGHT. Look across the tops of the head studs to see that they all appear to be the same length. If one
is taller, remove the stud, clean the threads in the block and reinstall.
q Install the head gaskets and cylinder heads; check for any misalignment.
q Place head stud washers onto the head studs. Then lubricate the top of head stud washers and head stud
threads with assembly lube.
q Lubricate the mating face and threads of the Head Stud Nuts with Assembly Lube and install them onto the Head
Studs tightening them HAND TIGHT.
Gator Fasteners Performance Head Stud Kit for 6.2L & 6.5L Chevy/GMC Instructions • December, 2021 (Page 1 of 2)
Fasteners
Gator Fasteners Performance Head Stud Kit for 6.2L & 6.5L Chevy/GMC Instructions • December, 2021 (Page 1 of 2)
q Snug all Head Stud Nuts on the Head Studs, then follow the torque sequence below in a 4-step process for the
Head Stud Nuts.
  1.Therstroundshouldbeto25ftlbs.
2. Then repeat the sequence for 50 ft lbs.
3. Then repeat the sequence for 75 ft lbs.
3. Followed by 100 ft lbs.
• The amount of Head Stud threads showing above the Head Stud Nut should all be about the same. If one
appears to have more thread, the stud is most likely not all the way in the head.
Disclaimer and Liabilities
Seller disclaims any responsibility/ liability for improper, incorrect, or inexperienced installation of products by the purchaser or
installer resulting in damage or loss. Buyer afrms by purchase of this product that it is t for intended use and accepts all liability.
Buyer afrms products are used at buyers own risk and accepts full responsibility.
2 3 7 11 15
1913 5 4 1217 8 16
61014
dF
FOLLOW US
TAG US #GATOR #GATORFASTENERS #NOTHINGBITESLIKE
WWW.GATORFAsTENERS.COM
@GATORFASTENERS
  • Page 1 1
  • Page 2 2

Gator HSK6265 User manual

Type
User manual

Gator HSK6265 is a performance head stud kit designed specifically for Chevy/GMC 6.2L & 6.5L Diesel engines, manufactured between 1982 and 2000. This kit provides a reliable and secure solution for high-performance applications, ensuring optimal cylinder head sealing and preventing potential leaks or failures. With its comprehensive set of components, including head studs, nuts, washers, assembly lube, thread sealant, and a thread chaser, the Gator HSK6265 kit offers a complete solution for upgrading and enhancing your engine's performance.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI