Wallgate INS-PSHD30 Operating instructions

Brand: Wallgate

Model: INS-PSHD30

Type: Operating instructions

Wallgate INS-PSHD30 is a handwashing station designed for public, commercial, and industrial applications. It offers a hygienic and touch-free handwashing experience with its motion-activated soap and water dispensers. The unit is made of durable materials and features anti-ligature design to prevent misuse. It can be wall-mounted and is suitable for various wall thicknesses. The INS-PSHD30 comes with a 2.5-liter soap container and requires a water supply of minimum 1.0 Bar for connection. It operates on a 230v AC 50Hz 13Amp electrical supply.

DETAIL VIEW C

DETAIL VIEW A

DETAIL VIEW B DETAIL VIEW D

A A

B B

C C

D D

MATERIAL:

FINISH:

t: +44 (0) 1722 744 594 f: +44 (0) 1722 742 096 e: sales@wallgate.com w: www.wallgate.com Company Reg No. 156022

THIS DRAWING IS THE PROPERTY OF WALLGATE LIMITED AND IS ISSUED ON THE STRICT UNDERSTANDING THAT THE INFORMATION CONTAINED WILL NOT BE REPRODUCED, COPIED OR USED WITHOUT PRIOR AGREEMENT OF WALLGATE LTD.

Limits: (unless stated)

` 0.25mm (sheetmetal)

` 0.10mm (machined)

` 2.00mm (pattern)

` 5.00mm (moulded)

O Copyright

Model/Client/Project:

TITLE:

Drg No: SCALE:

All dimensions in mm,

All angles 90~(unless stated)

3rd

SHEET 1 OF

INS-PSHD30

2022

NTS

HANDWASH FASCIA

430

420

REVISION HISTORY

REV DATE DESCRIPTION BY CHKD

3 13/10/2022 REMOTE MOUNTING ADDED AG RD

NOTES:

1. THE AIR GRILLE IS SLOTTED WITH THE SLOTS BEING 2mm WIDTH. ONE

WEB RUNS HORIZONTALLY TO REDUCE THE VERTICAL SLOT LENGTH

2. THE WATER AND SOAP NOZZLES HAVE 2mm OUTLET HOLES

3. THE WASTE GRILLE IS SLOTTED WITH THE SLOTS BEING 2mm WIDTH. A WEB

RUNS HORIZONTALLY TO REDUCE THE VERTICAL SLOT LENGTH.

4. THE HANDWASH FASCIA IS DESIGNED TO BE AS ANTI LIGATURE AS

POSSIBLE WITH INTERNAL FACES ANGLED TO PREVENT ITEMS BEING

JAMMED INTO THE BOWL.

NOTE 4

WASH NOZZLE

NOTE 2

AIR GRILLE

NOTE 1

SOAP NOZZLE

NOTE 2

A A

B B

C C

D D

MATERIAL:

FINISH:

t: +44 (0) 1722 744 594 f: +44 (0) 1722 742 096 e: sales@wallgate.com w: www.wallgate.com Company Reg No. 156022

Limits: (unless stated)

` 0.25mm (sheetmetal)

` 0.10mm (machined)

` 2.00mm (pattern)

` 5.00mm (moulded)

O Copyright

Model/Client/Project:

TITLE:

Drg No: SCALE:

All dimensions in mm,

All angles 90~(unless stated)

3rd

SHEET 2 OF

INS-PSHD30

2022

1 : 9

PSHD30 INSTALLATION

REVISION HISTORY

REV DATE DESCRIPTION BY CHKD

3 13/10/2022 REMOTE MOUNTING ADDED AG RD

160

380 MOUNTING

BRACKET WIDTH

232

CONTROL MODULE

AND WATER

HEATER DEPTH

260 SOAP BOTTLE

AND BRACKET HEIGHT

145 SOAP

BOTTLE WIDTH

105 SOAP

BOTTLE

THICKNESS

380

APERTURE

HEIGHT

375

MINIMUM

APERTURE

328

NOTES:

1. THIS SHEET SHOWS THE CONTROL MODULE IN ITS STANDARD MOUNTING POSITION. THE CONTROL MODULE SITS BEHIND THE FASCIA FOR

EASE OF CONNECTION

2. THE UNIT REQUIRES A WALL APERTURE OF 375mm WIDTH BY 380mm HEIGHT.

3. THE BASIN WASTE PIPE SHOULD BE CONNECTED TO A 1 1/2" (40mm NOMINAL) DEEP SEAL WASTE TRAP (NOT SUPPLIED), A RUNNING TRAP IS NOT RECOMMENDED FOR THIS PRODUCT.

4. A WATER SUPPLY OF MINIMUM 1.0 Bar IS REQUIRED FOR CONNECTION TO THE WATER INLET ON THE FRONT OF THE UNIT. THE SUPPLY IS TO BE ROUTED THROUGH THE PROVIDED ISOLATOR VALVE.

5. THE CONTROL MODULE IS SUPPLIED WITH A 2 METER CABLE WITH EXPOSED ENDS FOR CONNECTION TO A 230v AC 50Hz 13Amp ELECTRICAL SUPPLY.

6.THE WATER HEATER SUPPLIED WITH 0.7M FLYING LEAD TO BE INSTALLED INTO A SEPARATE 230v AC 50Hz 13Amp FUSED SPUR AS PER ZIP ES3 MANUAL.

7. FULL INSTALLATION DETAILS CAN BE FOUND IN THE PSH_30 PRODUCT MANUAL SUPPLIED WITH THIS PRODUCT.

8. THE FASCIA CAN BE INSTALLED MOUNTED IN WALLS BETWEEN 13mm AND 175mm THICK. LONGER STUD BARS CAN BE PURCHASED FOR INSTALLATION INTO THICKER WALLS.

9. ENSURE 100mm CLEARANCE ABOVE THE AIR INTAKE TO ENSURE ADEQUATE AIRFLOW TO THE UNIT.

FASCIA

45~ RECESS

FOR ANTI-

PICK MASTIC

(ALL ROUND)

INSTALL IN-LINE WITH

LOCAL REGULATIONS

FFL

WALL (NOTE 8)

WATER INLET PIPE

CONNECTION

WATER INLET PIPE

15mm ENDS

(NOT SUPPLIED)

230vAC 50Hz POWER

CONNECTION

SWITCHED FUSED

SPURS NOT SUPPLIED

1.5" (NOMINAL 40mm)

X 125mm WASTE PIPE

2.5 LITRE SOAP CONTAINER

(EXAMPLE POSITION SHOWN)

SOAP BOTTLE CAN BE MOUNTED UP

TO 45cm FROM THE SOAP INLET POINT

ISOLATOR

TAP (HAND WASH

& COLD WATER)

APERTURE TO

LIP HEIGHT 70mm

WATER SUPPLY PIPE

15mm ENDS

(NOT SUPPLIED)

100 MINIMUM

CLEARANCE

(NOTE 9)

517

A A

B B

C C

D D

MATERIAL:

FINISH:

t: +44 (0) 1722 744 594 f: +44 (0) 1722 742 096 e: sales@wallgate.com w: www.wallgate.com Company Reg No. 156022

Limits: (unless stated)

` 0.25mm (sheetmetal)

` 0.10mm (machined)

` 2.00mm (pattern)

` 5.00mm (moulded)

O Copyright

Model/Client/Project:

TITLE:

Drg No: SCALE:

All dimensions in mm,

All angles 90~(unless stated)

3rd

SHEET 3 OF

INS-PSHD30

2022

1 : 9

PSHD30 FASCIA

INSTALLATION

350

270

74 WALL

TO FASCIA LIP

175 WALL TO

BACK OF

FASCIA

REVISION HISTORY

REV DATE DESCRIPTION BY CHKD

3 13/10/2022 REMOTE MOUNTING ADDED AG RD

OVERALL DISTANCE: X (SEE NOTE ABOVE)

NOTES:

1. THIS SHEET SHOWS THE OVERALL DIMENSION FROM THE FRONT OF THE WALL TO THE REAR

OF THE HEATER, DIMENSION X.

ON A 13mm WALL X = 358mm. (13mm WALL + 113mm SPACER+ 232mm CONTROL MODULE).

ON A 175mm WALL X = 427mm. (175mm WALL + 232mm CONTROL MODULE).

ENGINE

MOUNTING

BRACKET

FASCIA

CLAMPNG

BRACKET

REAR PROFILE

OF BOWL

A A

B B

C C

D D

MATERIAL:

FINISH:

t: +44 (0) 1722 744 594 f: +44 (0) 1722 742 096 e: sales@wallgate.com w: www.wallgate.com Company Reg No. 156022

Limits: (unless stated)

` 0.25mm (sheetmetal)

` 0.10mm (machined)

` 2.00mm (pattern)

` 5.00mm (moulded)

O Copyright

Model/Client/Project:

TITLE:

Drg No: SCALE:

All dimensions in mm,

All angles 90~(unless stated)

3rd

SHEET 4 OF

PSHD30-R

2022

1 : 9

REMOTE MOUNTED

PSHD30

REVISION HISTORY

REV DATE DESCRIPTION BY CHKD

3 13/10/2022 REMOTE MOUNTING ADDED AG RD

NOTES:

1. THIS SHEET SHOWS A REMOTE MOUNTING POSITION FOR THE CONTROL MODULE WITH THE AIR CONNECTED TO THE FASCIA

THROUGH AN LONG FLEXIBLE AIR HOSE. THIS FACILITY ALLOWS THE CONTROL MODULE TO BE MOUNTED IN A VARIETY OF DIFFERENT

POSITIONS TO SUIT SITE REQUIREMENTS. (PLEASE NOTE: IF THIS INSTALLATION METHOD IS REQUIRED IT MUST BE REQUESTED

WHEN THE ORDER IS PLACED SO THAT THE APPROPRIATE CONNECTIONS CAN BE SUPPLIED.)

2. THE FASCIA REQUIRES A WALL APERTURE OF 375mm WIDTH BY 380mm HEIGHT.

3. THE SOAP CONTAINER HANGS ON A BRACKET THAT CAN BE WALL MOUNTED TO SUIT REQUIREMENTS ON SITE.

4. THE BASIN WASTE PIPE SHOULD BE CONNECTED TO A 1 1/2 " (40mm NOMINAL) DEEP SEAL WASTE TRAP (NOT SUPPLIED), A RUNNING TRAP IS NOT RECOMMENDED FOR THIS PRODUCT.

5. A WATER SUPPLY OF MINIMUM 1.0 Bar IS REQUIRED FOR CONNECTION TO THE WATER INLET ON THE FRONT OF THE UNIT. THE SUPPLY IS TO BE ROUTED THROUGH THE PROVIDED ISOLATOR VALVE.

6. THE CONTROL MODULE IS SUPPLIED WITH A 2 METER CABLE WITH EXPOSED ENDS FOR CONNECTION TO A 230v AC 50Hz 13Amp ELECTRICAL SUPPLY.

7.THE WATER HEATER SUPPLIED WITH 0.7M FLYING LEAD TO BE INSTALLED INTO A SEPARATE 230v AC 50Hz 13Amp FUSED SPUR AS PER ZIP ES3 MANUAL.

8. FULL INSTALLATION DETAILS CAN BE FOUND IN THE PSH_30 PRODUCT MANUAL SUPPLIED WITH THIS PRODUCT.

9. THE FASCIA CAN CAN BE MOUNTED IN WALLS BETWEEN 13mm AND 175mm THICK. LONGER STUD BARS CAN BE PURCHASED FOR INSTALLATION INTO THICKER WALLS.

10. ENSURE 100mm CLEARANCE ABOVE THE AIR INTAKE TO ENSURE ADEQUATE AIRFLOW TO THE UNIT.

WALL (NOTE 9)

ISOLATOR

TAP (HAND WASH

& COLD WATER)

FLEXIBLE AIR HOSE

2.5 LITRE SOAP

CONTAINER

MOUNTED REMOTELY

FASCIA

1.5" (NOMINAL 40mm)

WASTE PIPE TAIL

230vAC 50Hz POWER

CONNECTION

SWITCHED FUSED

SPURS NOT SUPPLIED

90~ ELBOW, CAN BE

FITTED TO REDUCE

BENDING OF HOSES

CONTROL MODULE

MOUNTED ON

ADJACENT WALL

WATER INLET

PIPE CONNECTION.

A A

B B

C C

D D

MATERIAL:

FINISH:

t: +44 (0) 1722 744 594 f: +44 (0) 1722 742 096 e: sales@wallgate.com w: www.wallgate.com Company Reg No. 156022

Limits: (unless stated)

` 0.25mm (sheetmetal)

` 0.10mm (machined)

` 2.00mm (pattern)

` 5.00mm (moulded)

O Copyright

Model/Client/Project:

TITLE:

Drg No: SCALE:

All dimensions in mm,

All angles 90~(unless stated)

3rd

SHEET 5 OF

INS-PSHD30

2022

NTS

PSHD30 FASCIA AND

ENGINE INSTALLATION

REVISION HISTORY

REV DATE DESCRIPTION BY CHKD

3 13/10/2022 REMOTE MOUNTING ADDED AG RD

INSTALL THE FASCIA INTO WALL INSTALL HOSES AND CABLES TO FASCIA

FIX ENGINE TO MOUNTING BRACKETS

CONNECT HOSES AND CABLES TO ENGINE

M10 STUD

BAR

WALL FIXING

BRACKET

M10 NUT

FASTEN TO 17Nm

M10 WASHER

AIR HOSE (LENGTH CAN BE

CUT TO SUIT INSTALLATION

REQUIREMENTS).

COLD WATER HOSE

MIXED WATER HOSE

PUSH-FIT TEE

M6 SECURITY SCREW

SPRING WASHER ON EITHER

SIDE OF RING TERMINAL

EARTH WIRE

SPRING

WASHER

M8 SCREW

DRINKING

WATER PIEZO

HANDWASH PIEZO

DRINKING

WATER OUTLET

AIR OUTLET

WARM WATER OUTLET

SOAP OUTLET

SOAP INLET

EARTH POINT

SOAP

CONNECTION

NOTE: THIS SHEET PROVIDES AN INSTALLATION OVERVIEW FOR REFERENCE ONLY. FOR

FULL DETAILS REFER TO THE PRODUCT MANUAL.

ADDITIONAL SPACE BRACKETS ARE PROVIDED

FOR WALLS LESS THAN 120mm THICK

Wallgate INS-PSHD30 Operating instructions

Wallgate INS-PSHD30 Operating instructions

Wallgate INS-PSHD30 Operating instructions

Related papers

Other documents