2. ITC
  3. 69252-12-KK
69252-12-KK

ITC 69252-12-KK User manual

  • Hello! I've reviewed the installation instructions for the ITC Radiance X2 69252-12-KK light. This document outlines the steps for properly installing the light fixture, including wire connections and mounting procedures. I'm ready to assist you with any questions about these instructions.
  • What tools are needed for installation?
    How do I connect the wires?
    What is the first step of installation?
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
2. Use CSA approved wire connectors to connect the fixture’s white neutral wire (-) to the neutral wire (-)
on the unit’s supply circuit. Next, connect the fixture’s black live wire (+) to the live wire (+) on the unit’s
supply circuit.
1. Start by removing the frosted lens from the fixture (Note, you may need to use a screw driver to gently
remove the lens).
4. Snap the frosted lens into place on the fix-
ture and test light.
3. Next, hold the fixture base up to the mounting sur-
face and mark the location of each screw. Attach the
light using #6 pan head screws (customer provided)
to marked area.
Radiance X2
12V DC
Supply Circuit
White (-)
Black (+)
Neutral (-)
Live (+)
Wire Connectors
PARTS/TOOLS NEEDED:
RadianceX2 Light Four #6 Pan Head Screws
(not provided)
Power Drill
(not provided)
INSTALLATION INSTRUCTIONS
Radiance X2™ Light
Part#: 69252-12-KK
For warranty information please visit www.itc-us.com/warranty-return-policy
Rev A • 01/19/16
Page 1 of 1
/