Maximum XO-40-S User manual

  • Hello! I am an AI chatbot trained to assist you with the Maximum XO-40-S User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Copyright © Kjaerulff 1 Digital A/S
www.kjaerulff1.com
3
DEUTSCH
Werkszeugnis
Wir Kjaerulff 1 Digital A/S
C.F. Tietgens Boulevard 19
5220 Odense SØ
Denmark
erklären, dass das Produkt: MAXIMUM XO-40 S
(Art.No. 7978), konform ist zu:
RoHS 2002/95/EC
Electromagnetic Compatibility (EMC) Directive 2004/108/EC
Standards:
EN 55013: 2001+A1: 2003+A2: 2006
EN 55020: 2007
EN 61000-3-2: 2006+A1: 2009
EN 6100-3-3: 2008
Low Voltage Directive 2006/95/EC
Standards:
EN 60065: 2002 + A1: 2006 + A11: 2008
1
ENGLISH
Content
Introduction ............................................................................................................... 4
0. Safety Precautions ................................................................................................ 5
1. Reference ............................................................................................................. 6
1.1 General Features ......................................................................................... 6
1.2 Accessories ................................................................................................. 6
2. Product Overview ................................................................................................. 7
2.1 Front Panel .................................................................................................. 7
2.2 Rear Panel ................................................................................................... 8
2.3 Remote Control Unit (RCU) ......................................................................... 9
3. Connection with Other Device ............................................................................ 10
3.1 Connecting to TV and cables ..................................................................... 10
3.2 Connecting to Dishes ................................................................................. 11
4. Installation ........................................................................................................... 12
4.1 Powering On .............................................................................................. 12
4.2 Antenna Connection .................................................................................. 12
4.3 Antenna Setup ........................................................................................... 12
4.4 Satellite List ............................................................................................... 14
4.5 Single Satellite Search ............................................................................... 14
4.6 Multi Satellite Search ................................................................................. 14
4.7 TP List........................................................................................................ 14
5. Edit Channel ....................................................................................................... 15
6. System Setup ..................................................................................................... 16
7. Tools ................................................................................................................... 17
7.2 Software upgrade by OTA.......................................................................... 17
8. REC Setting ........................................................................................................ 18
9. Games ................................................................................................................ 19
10. Basic Operation ................................................................................................ 19
10.1 Audio ........................................................................................................ 19
10.2 EPG ......................................................................................................... 19
10.3 Subtitle ..................................................................................................... 19
2
ENGLISH
10.4 Teletext .................................................................................................... 20
10.5 Program Information ................................................................................ 20
11. Channel List ...................................................................................................... 21
11.1 OK List ..................................................................................................... 21
11.2 Favorite List ............................................................................................. 21
12. USB Control ...................................................................................................... 21
12.1 Recording and Timeshift .......................................................................... 21
12.2 Recording List .......................................................................................... 22
13. Conditional Access Module (CAM) ................................................................... 23
14. Additional Information ....................................................................................... 23
14.1 Trouble Shooting...................................................................................... 23
15. WEEE information ............................................................................................ 25
16. Technical Specification ...................................................................................... 26
3
ENGLISH
Certificate of Compliance
We Kjaerulff 1 Digital A/S
C.F. Tietgens Boulevard 19
5220 Odense SØ
Denmark
Declare that the product: MAXIMUM XO-40 S
(item no. 7978), Is in conformity with:
RoHS 2002/95/EC
Electromagnetic Compatibility (EMC) Directive 2004/108/EC
Standards:
EN 55013: 2001+A1: 2003+A2: 2006
EN 55020: 2007
EN 61000-3-2: 2006+A1: 2009
EN 6100-3-3: 2008
Low Voltage Directive 2006/95/EC
Standards:
EN 60065: 2002 + A1: 2006 + A11: 2008
4
ENGLISH
Introduction
Congratulations on the purchase of the MAXIMUM XO-40 S.
Please read through this manual carefully before operating the Receiver
Should you experience any difficulties with the operation of MAXIMUM XO-40 S,
please consult the relevant section of this manual. Alternatively you can contact your
dealer.
Copyright
Content of this manual is not to be copied, used or translated in part or as a whole
without prior consent in writing except approval of ownership of copyright and
copyright law.
Warranty
We make certain reservations for changes in the product which are made by the
manufacturer. Furthermore we make reservations for new software versions which
can change some of the functions described in this manual.
The warranty does not cover parts which may become defective due to misuse of
the receiver if the receiver not has been used as described in this manual.
Moreover the warranty does not cover functions which have been changed due to
newer software versions. All changes in software are made to improve the daily use
and functionality of the receiver.
5
ENGLISH
0. Safety Precautions
This STB has been designed and manufactured to satisfy the international safety
standards. Please read the following safety precautions carefully before operating
this receiver.
Main Supply:
Before operating, please check the units operating voltage is 90 250 V AC @
50/60Hz.
Overload:
Do not overload a wall outlet, extension cord or adapter, neither use damaged power
cord or touch it with wet hand as this may result in electric shock.
Liquid:
The receiver shall not be exposed to dripping or splashing water, and that no objects
filled with liquids, such as base, shall be placed on the apparatus.
Ventilation:
Keep the slots on top of the receiver uncover to allow sufficient airflow to the unit. Do
not put the receiver on soft furnishings or carpets. Do not expose the receiver to
direct light or do not place it near a heater or in humid conditions. Do not stack other
electronic equipments on top of the receiver.
Cleaning:
Unplug the receiver from the wall outlet before cleaning. Clean the receiver by a soft
cloth or mild solution of washing-up liquid (no solvents).
Connection of LNB:
Disconnect the receiver from the mains when you connect it to satellite LNB or
disconnect it from LNB. Failure would possibly cause damage to the LNB.
Location:
Put the receiver indoor in order to avoid raining or sunlight.
Uncover:
Do not remove the cover. Contact qualified and licensed service personnel to repair
the receiver, or contact your dealer.
6
ENGLISH
1. Reference
1.1 General Features
DVB-S/DVB-S2 satellite receiver (MPEG-2/ MPEG-4)
LNB Loop-Through
DiSEqC1.0/1.1/1.2/1.3 (USALS)
Unicable Support (SatCR)
Memory for up to 3000 transponders and 5000 channels
Up to 32 favorite lists
Parental lock supported
Multi-language menus
Change between multiple audio tracks
DVB subtitles support
7 days Electronic Program Guide (EPG)
Teletext output through VBI and OSD
USB port
1.2 Accessories
User manual
Remote Control Unit
Batteries
Figure 1 - Accessories
7
ENGLISH
2. Product Overview
2.1 Front Panel
1. Power button
Switch between operation and standby modes.
2/4. Volume Button: Change Volume
3/6. Channel Button: Change Program
5. Menu Button: Activate main menu
7. OK Button: Confirm
Figure 2 - Front Panel
8
ENGLISH
2.2 Rear Panel
Figure 3 - Rear Panel
1. LNB IN
Connect satellite antenna cable.
2. LOOP OUT
Connect another receiver.
3. AUDIO/ VIDEO
Connect to TV using a RCA cable.
4. S/PDIF
Digital Audio output (Coaxial).
5. TV SCART
Connect to TV using a Scart cable.
6. HDMI
Connect to the TV using an HDMI cable.
7. USB2.0
USB 2.0 Port.
8. ON/OFF
Power on/off.
9
ENGLISH
2.3 Remote Control Unit (RCU)
With the remote control unit it is possible to control all of the receiver’s functions.
1. Switch between operation and standby mode.
2. Mute button.
3. DISP. Displays present resolution.
4. SUB : Displays the subtitle language list.
5. DVR INFO. Display the information of DVR
6. INFO/A-B: Display the program information.
7. /

: Fast rewind or forward.
8. I/

I: Previous/Next.
9.
: Play.
10. I I /STEP: Pause.
11.
/USB:
: :
: Stop/ Enter USB menu.
12.
●:
::
: Start recording.
13. Find (RED): Find Program by the name.
14. MARK (YELLOW): Mark a position when playing a video
15. Jump (BLUE): Setup event timer.
16. MENU: Activate main menu.
17. EXIT: Exit current menu step by step.
18. P+/P- : Change Programs.
19. ◄/►: Change volume in viewing mode.
20. EPG (Electronic Program Guide): Display the program guide.
21. OK: Confirm.
22. FAV: Display favorite channel list.
23. AUDIO/ZOOM: Switch between AUDIO and ZOOM.
24. RECALL. Back to last Program
25. TXT: Display the teletext.
26. PAGE +/- : Page up/down.
27. NUMERIC KEY (0~9): Enter a TV/radio channel number or menu option number.
28. SLEEP: Set the sleep time.
29.TV/RADIO: Switch Between TV and Radio.
10
ENGLISH
3. Connection with Other Device
The following diagram shows you the connections among receiver, TV, LNB and
other equipment.
3.1 Connecting to TV and cables
Figure 5. Connecting to TV
11
ENGLISH
3.2 Connecting to Dishes
You can connect one fixed dish LNB directly to the LNB IN, or receivet up to 16
satellite positions using DiSEqC commands or even more satellite positions by using
a motorized satellite dish.
Figure 6. Connecting to Dish LNB
12
ENGLISH
4. Installation
Tip: The default password is 0000. If you have forgotten your password, please
contact your dealer.
4.1 Powering On
4.2 Antenna Connection
Antenna Connection can configure antenna using only one LNB or Motor.
Menu->Installation->Antenna Connection
When Motor Antenna is selected then set DiSEqC 1.2 or USALS in Antenna
Setup.
4.3 Antenna Setup
Antenna Setup can configure antenna setting parameters.
Menu->Installation->Antenna Settings
Satellite: Select the satellite you want to configure.
LNB Freq: Change LNB frequency.
Transponder(TP for short): Change transponder.
DiSEqC 1.0: Select required DiSEqC1.0 input.
DiSEqC 1.1: Select required DiSEqC1.1 input.
22 kHz: Select ON, OFF.
Polarity: Select horizontal, vertical or auto.
Recommended: Use option Auto!
13
ENGLISH
4.3.1 Antenna Setup for DiSEqC 1.2
1. Select Motor Antenna in Antenna Connection.
2. Enter Antenna Setup, navigate with the arrow key DOWN to the Motor Type
option and select DiSEqC1.2 by LEFT/RIGHT button.
3. Navigate with the arrow key DOWN to Motor Setting option and press OK button.
Motor Setting
Satellite/ Transponder
Select a Satellite and a Transponder.
Position No. & Save
Press LEFT/RIGHT button and select one of the 64 settings (0 to 63). You also can
press numeric keys directly to input Position No.
Go to x
Press OK button and select one of the 64 settings (0 to 63). Press OK button and it
shows a message on the screen "Wait to move the position!”
Save
Press LEFT/RIGHT button to move dish, press OK button to save the position.
Recalculation
Press OK button to recalculate.
4. Navigate with the arrow key DOWN to Delete All, press ok to delete all satellite
positions. This item is only valid in “DiSEqC1.2” mode.
5. Navigate with the arrow key DOWN to Limit Setup, press OK button.
Limit Setup
Set East/West limit. Select East Limit/West Limit by LEFT/RIGHT button.. Press OK
button to limit.
14
ENGLISH
4.3.2 Antenna Setup for USALS
Operations are almost the same with DiSEqC 1.2, the only difference is set local
longitude and latitude then Motor will rotate to the correct angle automatically.
4.4 Satellite List
Satellite List can Edit/Add/Delete/Select the satellite.
Menu
Installation
Satellite List
Press UP/DOWN button to highlight the satellite, press OK button to mark.
Note: Must select a satellite here before doing search.
4.5 Single Satellite Search
Menu
Installation
Single Satellite Search
Satellite:
Filter: FTA Only: Press LEFT/RIGHT button to choose only FTA channels or not.
Scan Channel: Press LEFT/RIGHT button to choose only search TV, radio or both.
Network Search: Press LEFT/RIGHT button to change network search mode.
Scan Mode: Press LEFT/RIGHT button to change the scan mode.2.
Auto scan is a fast blind scan, may skip some transponder with weak signal.
Accurate Scan is a slow blind scan, but may get more transponders
Present Scan only search stored transponders.
4.6 Multi Satellite Search
Menu->Installation->Multi Satellite Search
The operations are almost same to Single Satellite Search, please refer to 4.5.
4.7 TP List
Menu->Installation->TP List
Search on a transponder of satellite which is selected in Satellite List. Can
Edit/Add/Delete TP here.
15
ENGLISH
5. Edit Channel
Edit
TV Radio
Delete All
Favorite Lock Skip Move
Favorite Lock Skip Move
Edit Edit
Sort
Rename
Delete
Sort
Rename
Delete
16
ENGLISH
6. System Setup
System
Setup
Language
TV System
Display
Setting
Local Time
Setting
Parental
Lock
OSD
Setting
Favorite Other
Language
First Audio
Second
Audio
Subtitle
Language
Teletext
Video
Resolution
Aspect
Mode
Digital
Audio out
Brightness
Contrast
Saturation
Hue
Sharpness
GMT
Offset
Summer
Time
Date
Time/
Timer
Setting
Channel
Lock
New
Password
Confirm
Password
Subtitle
Display
OSD Time
out
OSD
Transpare
ncy
OSD
Animation
1. Fav
Group1
2. Fav
Group2
LNB
Power
Channel
PlayType
Beeper
Auto
Standby
Standby
LED
Brightness
Standby
17
ENGLISH
7. Tools
7.2 Software upgrade by OTA
This receiver supports over the air software upgrade. For this to work it is necessary
that the manufactor makes this software available on the satellite. Software can also
be downloaded from the manufacturer’s homepage and put on a USB.
Homepage: www.kjaerulff1.com
Tools
Information
Factory
Setting
Common
Interface
USB Upgrade
& Save
Media Player
Remove USB
Device Safely
Bootloader/
FirmwareVer
Config Ver
STB Model
Wrong S/N
CI/CI+
18
ENGLISH
8. REC Setting
Only available when a USB device is connected
REC Setting
PVR Storage
PVR Setting
Partition
Disk
Format
PVR
Timeshift
Jump
TS File Size/
Timeshift to Record
PS record
Display REC Icon
/