Components and control elements
LCD screen indicators
Battery installation
Battery Life / Inserting SD Card
1
2
3
4
One touch record
5
LED Indicator
5
Motion detection
7
Overwrite Enable
8
Playback
Recording with digital devices
9
6
Recording moving images from TV set and other video sources
10
Playback of media files on Yukon MPR
11
Playback of moving images on PC
12
Playback of moving images on TV screen
12
Updating media files
14
Copying recorded files
14
Deleting recorded files
15
EV adjustment
5
Slide Show
5
18
18
19
19
20
20
21
22
Specifications
23
Setting recording parameters
Resolution setting
Frame rate setting
Storage setting
Setting video time
Setting TV-OUT
Setting LCD OFF
Setting MPR’s Auto Off
Setting vibration
Language setting
Setting date and time
Setting format
16
16
17
17
Getting Star ted
Camera/AV in
Microphone input
LED indicator
AV OUT/USB/DC IN
REC/OFF switch button
[ ] Play / OK
[ ] REW / VOL +
1
2
3
4
5
6
7
[ ] FWD / VOL -
[ ] Menu key
[ ] Return key
Tripod thread
SD card slot
Power/photo
Speaker
Built-in microphone
8
9
10
11
12
13
14
15
12
11
13
14
15
6
7
8
9
10
1
2
3
4
5
Yukon Mobile Player/Recorder
џ
USB cable
џ
AV IN cable
џ
AV OUT cable
џ
Digisight N550/N750 cable
џ
Waist clip
џ
Rechargeable battery
џ
AC Charger
џ
SD memory card
џ
User manual
џ
Warranty card
џ
Audio cable
Getting Star ted
11
10
12
Recording symbol
Motion detection symbol
Number of frames indicator
Date/Time
Battery indicator
SD card symbol
Cyclic recording symbol
1
2
3
4
5
6
7
SD
REC
AUTO
000333
2009/07/17 13:21:15
02:41:07
02345MB
1
2
3
4
5 6 7 8
9
Remaining memory
Recorded video files
Recorded audio files
Recorded photo files
8
9
10
11
12
Elapsed recording time
20120105_234207.AVI
20120105_234153.AVI
20120105_234025.AVI
20120105_234007.AVI
20120101_013126.AVI
20120101_010421.AVI
20120101_010259.AVI
689K
3.91M
7.34M
5.0M
2.37M
16.55M
25.65M
1/7
1/4
20120105_234451.WAV
20120105_234354.WAV
20120105_234324.WAV
20120105_222448.WAV
1019K
520K
196K
54K
1/4
20120105_233946.JPG
20120105_233943.JPG
20120105_233938.JPG
20120105_233934.JPG
Your Yukon MPR operates with a mobile phone battery
pack (KB-02 series)
Open the cover by slightly pushing and pull it back.
Insert the battery pack with the corner of " " facing toward the battery
compartment as illustrated.
Close the battery cover.
s
Connect the USB cable to the AC power adapter. Insert the USB cable
into the USB port (4) of your MPR.
The LED indicator (3) on your MPR lights red when charging is in progress.
The battery is fully charged when the goes off. LED indicator
Rechargeable
Li-ion battery
1400 mAh 240 min
Battery pack capacity
Full charge time (approx.)
Battery pack capacity
Continuous recording time (approx.)
1400 mAh
140 min (fully charged battery)
Battery pack capacity
Continuous recording time (approx.)
1400 mAh
240 min (fully charged battery)
Insert the SD card with the " " mark facing the SD slot as
illustrated.
SD card capacity
2GB
4GB
8GB
16GB
32GB
720x480
Approx. 65 min
Approx. 130 min
Approx. 260 min
Approx. 520 min
Approx. 1040 min
640x480
Approx. 75 min
Approx. 150 min
Approx. 300 min
Approx. 600 min
Approx. 1200 min
320x240
Approx. 310 min
Approx. 620 min
Approx.1240 min
Approx. 2480 min
Approx. 4960 min
Moving images are recorded in AVI (MPEG-4) format.
a. When the MPR is turned off, connect a digital NV device and slide the
switch button (5) The LED indicator flashes red meaning
video and audio recording is in progress.
upwards.
b. Slide the s to save a video and audio
recording.
switch button (5) downward
a. When , do not connect and slide the MPR is turned off a digital NV device
the . switch button (5) The LED indicator flashes green meaning
audio recording is in progess.
b. Slide the to save audio record . switch button (5) downwards your ing
LED indicator
REC switch button
Recording video: flashing red
Recording audio: greenflashing Charging: red light is on
Fully charged: red light off
Normal operation: stable blue
No signal Low power/Memory full alarm: flashing b/ lue
EV can be adjusted in Preview/Record mode
EV adjustment range: -3 to +3
In photo playback mode, to enable photo slide show.press [ ]
Recording with digital night vision monoculars
Ranger 5x42/Ranger Pro 5x42
l Connect the plug of the Ranger’s AV cable to the Ranger’s “AV out” port
(see scheme 1 below).
l Connect the yellow plug of the recorder’s AV IN cable to the yellow jack of
the Ranger’s AV cable.
l Connect the thin plug of the recorder’s AV IN cable to the “CAM IN” port of
the video recorder.
l Start the video recorder, turn on the NV Ranger 5x42/Ranger Pro 5x42.
l Adjust the image according to the instructions before recording.
Recording with digital riflescopes
l Connect the yellow plug of the included Digisight N550/N750 cable to the
“AV out” port of the digital riflescope (see scheme 2).
l Connect the other plug of the Digisight N550/N750 cable to the “CAM IN”
port of the video recorder.
l Start the video recorder and the riflescope.
l Adjust the image according to the instructions before recording.
Digisight N550/N750
6
a. When the MPR is off, connect a digital NV device, press and
hold the power button [ ] for two seconds to enter preview screen.
b. Press the menu button [ ] and select "System setting",
press [ ] to enter System Setting menu.
c. Press [ ] or [ ] and select "Motion detection”
d. Select "ON" and press [ ] to activate the Motion Detection function
as . illustrated
After setting, return to the preview screen by pressing [ ].
Sign “AUTO” otion detection
is activated.
in the upper part of the screen means m
Basic Operations
7
Basic Operations
a. When the MPR is off, connect a digital NV device, press and
hold the power button[ ] for two seconds to enter preview screen.
b. Press the menu button [ ], select "S " and press [ ] ystem setting
to enter System Setting menu.
c. Press [ ] or [ ] and select "Overwrite Enable".
d. Select "ON" and press [ ] to start enable overwrite.
After setting, return to the preview screen, "[ ]" shows in the
bottom-left part of the screen.
8
a. In the state of preview, press [ ], select "Record Playback".
b. Select "Video", "Photo" or "Audio" and press [ ].
c. Enter "Video", select the required video file with [ ] or [ ] key.
d. Press [ ] key to play back the selected video file.
e. Press [ ] key to stop playback.
f. Press [ ] key to return to the of recorded files.list
Enter "Photo" and "Audio" mode, operation procedure
is the same as described above.
20120105_234207.AVI
20120105_234153.AVI
20120105_234025.AVI
20120105_234007.AVI
20120101_013126.AVI
20120101_010421.AVI
20120101_010259.AVI
689K
3.91M
7.34M
5.0M
2.37M
16.55M
25.65M
1/7
9
a. Press and hold the power button [ ] for two seconds to enter
preview screen.
b. Press [ ] to start recording, the red LED indicator is flashing during
recording. "Rec" shows in the upper left corner of the screen.
c. Press [ ] to stop and save a recording, the red LED goes off.
SD
REC
AUTO
00033 3
2009/ 07 /17 13:21 :1 5
02:41 :0 7
02345 MB
SD
REC
AUTO
00033 3
2009/ 07 /17 13: 21 :15
02:41 :0 7
02345 MB
10
a. with TV or other
source via AV input cable.
When the MPR is off, connect the MPR an
video
b. Press [ ] and hold for two seconds to enter preview screen.
c. Press [ ] to start recording, the LED indicator flashes red during
recording. "Rec" shows in the upper left corner of the screen.
a. In the state of preview, press [ ] to enter the
Media Playback mode.
b. Enter "Photo", select the required Photo files with [ ] or [ ] key.
c. Press [ ] key to play back the selected photo file.
d. Press [ ] key to stop playing.
e. Press [ ] key to return the list of recorded files.
Enter "Music" or "Movie" mode, operation is the same as described
above.
1/4
20120105_233946.JPG
20120105_233943.JPG
20120105_233938.JPG
20120105_233934.JPG
Basic Operations
11
a. Remove the SD card, connect it with the computer via a card reader.
b.Connect the MPR with the computer via a USB cable. "PC Connection"
message shows on the screen.
a. In the state of preview, connect the MPR with TV/monitor via AV output
cable.
b.Press the [ ]button, select "System Setting"
12
c. Press [ ] or [ ], and [ ] in "TV-OUT Setting" option to select
"PAL" or "NTSC". Image will be transmitted from the MPR to the TV.
d. Further operations are the same as the MPR's (playback of moving
images on the MPR).
13
a.
b.
Remove the SD card, connect it with the computer via a card reader.
Connect the MPR with the computer via a USB cable.
"PC Connection" message shows on the screen.
c. Media formats
Music
Movie
Photo
MP3/MP2.5
AVI
JPG/JPEG
a. In the playback mode, press [ ] to enter submenu.
b. Select the required file, press [ ].
c. Select "Copy to", Press "Nand flash" or "SD" as illustrated.
14
a. In the playback mode press [ ] to enter submenu.
b. Select the required file, press [ ].
c. Select "Delete", press "All" or "Current" or "Cancel" as illustrated.
d. , select "Yes" or "No" as illustrated.Press [ ]
15
a. In the state of preview,press [ ] into record system setting.
b. Select “ " and "Microphone" submenu, press [ ].Resolution
c. Press [ ] to back to the state of preview.
a. In the state of preview, press the [ ] button, select
"System setting".
b. Press [ ] or [ ], select "Resolution".
c. Select "720x480" or "640x480" or "320x240"and "720x576" or
press [ ].
d. Press [ ] to return to the system setting menu.
You can use either internal microphone or attach an external one
using microphone input (2).
16
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/