Zinsser 60601A User guide

Type
User guide
TECHNICAL DATA JMX-06
JOMAX
®
VIRUS & MOLD KILLER
Form: GDH-12
Rev.: 031813
1
.DESCRIPTION AND USES .
Jomax
®
Virus & Mold Killer is a disinfectant, fungicide,
virucide, bactericide, mildewcide, and mildewstat. It also
provides excellent cleaning and deodorizing performance.
It is designed for use in hospitals, medical and dental
offices, nursing homes, industrial and institutional facilities.
Jomax Virus & Mold Killer is suitable for use on hard, non-
porous surfaces such as appliances, basins, bathroom
fixtures, bathtubs, cabinets, chairs, countertops,
examining tables, floors, sinks, toilets, urinals, walls, and
other non-porous surfaces made of fiberglass, formica,
glass, ceramic, metal, plastic and steel.
PRODUCTS .
SKU Container Size
60601A 1-Gallon
.PRODUCT APPLICATION .
IMPORTANT
Where mist or vapors may be generated, proper
ventilation must be provided in accordance with good
ventilation practices. In the absence of proper
environmental controls, a NIOSH/MSHA approved
respirator is advised. Wear protective eyewear (goggles or
face shield), long-sleeved shirt and long pants, socks and
resistant footwear and rubber gloves.
DIRECTIONS FOR USE
Surfaces Contaminated with Mold & Mildew Remove
all heavy build-up of growth and loose debris from areas to
be treated. Mix 1 part of Jomax Virus & Mold Killer
Concentrate with 3 parts water to make a working solution.
Apply the product with a commercial low-pressure sprayer
6 to 8 inches from the surface or use a wet mop, sponge,
pad or other suitable application device. Make sure the
treated area is thoroughly wet for at least 10 minutes and
allow to air dry. Repeat every 7 days or more frequently if
growth reoccurs. DO NOT mix this product with other
cleaning products.
Carpet Cleaning and Deodorizing This product may be
used in industrial and institutional areas such as
retirement homes, motels, and hotel chains, nursing
homes, schools and hospitals. For sue on wet cleanable
synthetic fabrics. Do not use on wool. Vacuum carpet
thoroughly prior to cleaning. Test fabric for color fastness.
Follow application procedures as specified for any
conventional steam cleaning equipment used. For rotary
floor machines, spray on the carpet at a rate of 300-500
square feet per gallon. When finished, set the carpet pile
in one direction using a stiff brush. Place aluminum foil
under the legs of furniture while carpet is drying. Do not
over-wet as over-wetting can cause the carpet to shrink.
PRODUCT APPLICATION (cont.) .
Smoke and Water Damage Jomax Virus & Mold Killer
is an effective deodorizer for use in water damage
restoration situations and against odor on porous and non-
porous surfaces which include carpets, sub-floors, drywall,
trim and frame lumber, tack-less carpet strips and
paneling. Saturate the affected materials with enough
product to remain wet for 10 minutes. Use with proper
ventilation.
Disinfection and Virucidal Applications This product
is effective against HIV-1, Herpes Simplex and Influenza.
Use full strength. DO NOT DILUTE. Apply Virus & Mold
Killer Concentrate undiluted to hard, non-porous surfaces,
with a cloth, mop, sponge or sprayer, or by immersion.
Make sure the surface is and remains thoroughly wet for
10 minutes. Wipe dry with a cloth, sponge or mop or allow
to air dry. For heavily soiled surfaces, pre-clean with soap
and water prior to using Virus & Mold Killer.
Rinse all surfaces that come in contact with foods
such as countertops, appliances, tables and
stovetops with potable water before re-use. Do not
use on utensils, glassware or dishes.
For sprayer applications, use a coarse spray device.
Spray 6-8 inches from the surface and rub with a brush,
sponge or cloth. Do not breathe spray vapor. This product
is not to be used as a terminal sterilant/high level
disinfectant on any surfaces or instrument that (1) is
introduced directly into the human body, either into or in
contact with the bloodstream or normally sterile areas of
the body, or (2) contacts intact mucous membranes but
which do not ordinarily penetrate the blood barrier or
otherwise enter normally sterile areas of the body. This
product may be used to pre-clean or decontaminate
critical or semi-critical medical devices prior to sterilization
or high-level disinfection.
Personal Protection: The worker must wear disposable
latex gloves, gown, mask and eye protection to prevent
contamination from soiled items.
Cleaning Procedure: Blood and other body fluids must
be thoroughly cleaned from surfaces and objects before
application of this product.
Contact Time: Allow Jomax Virus & Mold Killer
Concentrate to contact treated items for 30 seconds. This
time will not control other common types of viruses and
bacteria listed on the label.
Disposal of Infectious Material: Any blood or other body
fluids must be autoclaved and disposed of according to
federal, state and local regulations for infectious waste
disposal.
TECHNICAL DATA
JOMAX
®
VIRUS & MOLD KILLER
Rust-Oleum Corporation Form: GDH-18
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 031813
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
VIRUS & MOLD KILLER
Active Ingredients
Oxychlorine Compounds (Proprietary), Didecyl Dimethyl Ammonium Chloride
Weight
Per Gallon
8.33 lbs.
Per Liter
1.00 kg
pH
NA
VOC (Based on Consumer
Product Rule)
<0.1%
Mixing Ratio
3:1 Water to Concentrate
Coverage Rate
300-500 sq.ft./gal.
Shelf Life
2 years
Flash Point
>200ºF (93ºC)
Warning!
Causes substantial but temporary eye damage and skin irritation. Do not get in eyes, on
skin or clothing. Wear protective eyewear (goggles or face shield), long-sleeved shirt and
long pants, socks and resistant footwear and rubber gloves. Wash thoroughly with soap
and water after handling and before eating or drinking. Remove contaminated clothing
before reuse. KEEP OUT OF REACH OF CHILDREN.
Safety Information
For additional information, see MSDS.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.
  • Page 1 1
  • Page 2 2

Zinsser 60601A User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI