TECHNICAL DATA JMX-02
JOMAX
®
PRE-PAINT CLEANER
Form: CS2145
Rev.: 030713
.DESCRIPTION AND USES .
Jomax
®
Pre-Paint Cleaner is formulated to clean dirt,
grease and other household soils from interior surfaces
before painting. This product features a no rinse formula
and does not leave any residue. It is recommended for
cleaning walls, ceilings, trim, doors and other interior
household surfaces. Proper use helps promote adhesion
and contains no phosphate.
This product is biodegradable, has zero VOC, and
contains no harmful solvents. Jomax Pre-Paint Cleaner is
‘Design for the Environment’ certified. It contains no
bleach, ammonia or phosphorous. For more information
on EPS’s ‘Design for the Environment’ program, log onto:
http://www.epa.gov/dfe/.
PRODUCTS .
SKU Container Size
258968 32 fluid ounces
258969 1 gallon
.PRODUCT APPLICATION .
DIRECTIONS FOR USE
Before use, make sure all loose dirt and debris is removed.
Spray 6-8 inches away from the surface. Apply directly to
soiled areas. Allow product to penetrate briefly. For older,
more difficult jobs, apply a generous amount of pre-paint
cleaner and allow it to stand a few minutes before wiping
dry. To wipe dry, use a clean cellulose sponge, cloth or
paper towel. For severe stains, repeat as necessary and
scrub lightly.
NOTE: JOMAX® Pre-Paint Cleaner is not a de-glosser.
Carefully examine cleaned surfaces. Old gloss and semi-
gloss surfaces require a solvent de-glosser or sanding to
promote proper adhesion for the subsequent coating. *Do
not mix this product with other chemicals and do not use
on varnished surfaces, granite, marble, silver, brass or
leather.
CAUTION! Avoid contact with eyes and skin. If eye
contact occurs, flush with water for at least 15 minutes. If
irritation persists, seek medical attention. Do not take
internally. KEEP OUT OF REACH OFCHILDREN.
DISPOSAL
The empty container can be recycled. If recycling is not
available, discard in trash.