Technical Data Bulletin
6500 Industrial Way
Alpharetta, GA 30004
770-670-7860
www.cfiproducts.com
MX-3 Complete Mildewcide
MX-3 Complete Mildewcide provides the highly versatile, broad spectrum
fungicidal protection of IPBC to prevent defacement or deterioration of coatings
and polymeric surfaces by mold, mildew & algae. Its unique patented biocide
carrier is non-toxic and does not contribute to the odor or VOC of paint. MX-3
is registered with the Environmental Protection Agency.
EPA Reg. No. 1529-41-87959. Registered in all 50 states.
Selection Data – General Type; Mildewcide
Performance Benefits
• Unique patented formulation
• No VOC carrier that is non-toxic
• Low odor
• Color stable
• Compatible with water and oil based systems
• High flash point (<220 C)
• Discoloration of paint film kept to absolute minimum
Applications – Water and oil based paint, stains, adhesives and coatings. For interior and
exterior use.
Application Data – Thoroughly mix 1.5 weight ounces per gallon of paint or stain into the
coating for 2-3 minutes. Apply coating per manufacturers specifications. For best results follow
manufacturer’s instructions for cleaning and preparing the surface.
PRECAUTIONARY STATEMENTS: CAUTION: Hazards to humans and domestic
animals. Causes skin irritation and moderate eye irritation. Harmful if swallowed. Avoid contact
with eyes, skin and clothing. Wash hands thoroughly with soap and water after handling. Users
should wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. Remove
contaminated clothing and wash before reuse.
Page 1