Zinsser 60601A User guide

Brand: Zinsser

Model: 60601A

Type: User guide

TECHNICAL DATA JMX-06

JOMAX

VIRUS & MOLD KILLER

Form: GDH-12

Rev.: 031813

.DESCRIPTION AND USES .

Jomax

Virus & Mold Killer is a disinfectant, fungicide,

virucide, bactericide, mildewcide, and mildewstat. It also

provides excellent cleaning and deodorizing performance.

It is designed for use in hospitals, medical and dental

offices, nursing homes, industrial and institutional facilities.

Jomax Virus & Mold Killer is suitable for use on hard, non-

porous surfaces such as appliances, basins, bathroom

fixtures, bathtubs, cabinets, chairs, countertops,

examining tables, floors, sinks, toilets, urinals, walls, and

other non-porous surfaces made of fiberglass, formica,

glass, ceramic, metal, plastic and steel.

PRODUCTS .

SKU Container Size

60601A 1-Gallon

.PRODUCT APPLICATION .

IMPORTANT

Where mist or vapors may be generated, proper

ventilation must be provided in accordance with good

ventilation practices. In the absence of proper

environmental controls, a NIOSH/MSHA approved

respirator is advised. Wear protective eyewear (goggles or

face shield), long-sleeved shirt and long pants, socks and

resistant footwear and rubber gloves.

DIRECTIONS FOR USE

Surfaces Contaminated with Mold & Mildew – Remove

all heavy build-up of growth and loose debris from areas to

be treated. Mix 1 part of Jomax Virus & Mold Killer

Concentrate with 3 parts water to make a working solution.

Apply the product with a commercial low-pressure sprayer

6 to 8 inches from the surface or use a wet mop, sponge,

pad or other suitable application device. Make sure the

treated area is thoroughly wet for at least 10 minutes and

allow to air dry. Repeat every 7 days or more frequently if

growth reoccurs. DO NOT mix this product with other

cleaning products.

Carpet Cleaning and Deodorizing – This product may be

used in industrial and institutional areas such as

retirement homes, motels, and hotel chains, nursing

homes, schools and hospitals. For sue on wet cleanable

synthetic fabrics. Do not use on wool. Vacuum carpet

thoroughly prior to cleaning. Test fabric for color fastness.

Follow application procedures as specified for any

conventional steam cleaning equipment used. For rotary

floor machines, spray on the carpet at a rate of 300-500

square feet per gallon. When finished, set the carpet pile

in one direction using a stiff brush. Place aluminum foil

under the legs of furniture while carpet is drying. Do not

over-wet as over-wetting can cause the carpet to shrink.

PRODUCT APPLICATION (cont.) .

Smoke and Water Damage – Jomax Virus & Mold Killer

is an effective deodorizer for use in water damage

restoration situations and against odor on porous and non-

porous surfaces which include carpets, sub-floors, drywall,

trim and frame lumber, tack-less carpet strips and

paneling. Saturate the affected materials with enough

product to remain wet for 10 minutes. Use with proper

ventilation.

Disinfection and Virucidal Applications – This product

is effective against HIV-1, Herpes Simplex and Influenza.

Use full strength. DO NOT DILUTE. Apply Virus & Mold

Killer Concentrate undiluted to hard, non-porous surfaces,

with a cloth, mop, sponge or sprayer, or by immersion.

Make sure the surface is and remains thoroughly wet for

10 minutes. Wipe dry with a cloth, sponge or mop or allow

to air dry. For heavily soiled surfaces, pre-clean with soap

and water prior to using Virus & Mold Killer.

Rinse all surfaces that come in contact with foods

such as countertops, appliances, tables and

stovetops with potable water before re-use. Do not

use on utensils, glassware or dishes.

For sprayer applications, use a coarse spray device.

Spray 6-8 inches from the surface and rub with a brush,

sponge or cloth. Do not breathe spray vapor. This product

is not to be used as a terminal sterilant/high level

disinfectant on any surfaces or instrument that (1) is

introduced directly into the human body, either into or in

contact with the bloodstream or normally sterile areas of

the body, or (2) contacts intact mucous membranes but

which do not ordinarily penetrate the blood barrier or

otherwise enter normally sterile areas of the body. This

product may be used to pre-clean or decontaminate

critical or semi-critical medical devices prior to sterilization

or high-level disinfection.

Personal Protection: The worker must wear disposable

latex gloves, gown, mask and eye protection to prevent

contamination from soiled items.

Cleaning Procedure: Blood and other body fluids must

be thoroughly cleaned from surfaces and objects before

application of this product.

Contact Time: Allow Jomax Virus & Mold Killer

Concentrate to contact treated items for 30 seconds. This

time will not control other common types of viruses and

bacteria listed on the label.

Disposal of Infectious Material: Any blood or other body

fluids must be autoclaved and disposed of according to

federal, state and local regulations for infectious waste

disposal.

TECHNICAL DATA

JOMAX

VIRUS & MOLD KILLER

Rust-Oleum Corporation Form: GDH-18

11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 031813

Vernon Hills, Illinois 60061 www.rustoleum.com

An RPM Company

.PHYSICAL PROPERTIES .

VIRUS & MOLD KILLER

Active Ingredients

Oxychlorine Compounds (Proprietary), Didecyl Dimethyl Ammonium Chloride

Weight

Per Gallon

8.33 lbs.

Per Liter

1.00 kg

VOC (Based on Consumer

Product Rule)

<0.1%

Mixing Ratio

3:1 Water to Concentrate

Coverage Rate

300-500 sq.ft./gal.

Shelf Life

2 years

Flash Point

>200ºF (93ºC)

Warning!

Causes substantial but temporary eye damage and skin irritation. Do not get in eyes, on

skin or clothing. Wear protective eyewear (goggles or face shield), long-sleeved shirt and

long pants, socks and resistant footwear and rubber gloves. Wash thoroughly with soap

and water after handling and before eating or drinking. Remove contaminated clothing

before reuse. KEEP OUT OF REACH OF CHILDREN.

Safety Information

For additional information, see MSDS.

The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The

statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use

of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,

will be limited to replacement of defective materials. All technical information is subject to change without notice.

Zinsser 60601A User guide

Zinsser 60601A User guide

Related papers

Other documents