GE JTP15ADAA, JTP15BDBB, JTP15CDCC, JTP15SDSS, JTP15WDWW Specification

  • Hello! I am an AI chatbot trained to assist you with the GE JTP15ADAA Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What built-in oven model comes in Bisque?
    What is the cutout height for a 30 inch installation?
    Can I install gas or electric cooktops above the oven?
    Are there any approved cooktop models?
    What is the free space behind the oven?
    Is there an option for undercounter installation?
    What is the cutout depth for an undercounter installation?
    What type of support platform is required?
GE Appliances
Specification Created 7/01
JTP15AD/BD/CD/SD/WD - GE 30" Built-In Single Wall Oven
5
24
25
Gas or electric cooktops may be installed over
this oven. See cooktop installation instructions
for cutout size. See label on top of oven for
approved cooktop models.
Gas (including the pressure regulator)
and electrical connections for
gas cooktop must be located in an
adjacent accessible location to the right.
For a 36" gas cooktop, the connections
may be made to the left.
120 Volt
Outlet
Gas
connection
Junction box
location
240/208V
36'' MIN.
4'' To 4-1/2 '' Toe kick allowable
Match toe kick height
front and two sides
22'' MIN. above
support platform
Top and/or side
fillers may be
necessary if unit
is positioned
between
existing cabinets
28-1/2'' MIN.
28-5/8'' MAX.
27-1/4'' MIN.
27-5/16'' MAX.
Cutout height
3/4'' Support
platform required
23-1/2" MIN.
Cutout depth
Allow 11/16''
overlap over side
edges of cutout
1-1/2"
Countertop
Note: Oven is rated for use only under the following cooktops:
• 30" and 36" standard sealed burner gas cooktops and selected 36” and 30” CleanDesign and
Calrod
®
electric cooktops (excludes JP968/938).
Note: Gas or electric cooktops may be installed over this oven. See cooktop installation
instructions for cutout size. See label on back of oven for approved cooktop models.
Installation Information: Before installing, consult installation instructions packed with
product for current dimensional data and for alternate installation options.
Undercounter Installation (in inches)
5-9/16"
Reference dim. for
MAX. support height
with typical 36" countertop
height
36" Typical
Countertop height
Power cord
Reference
5-9/16
30-7/16
Free space
1-1/2" MIN.
1-1/2" Typical countertop
Side View
22
27-5/16" MAX.
Cutout height
27-1/4" MIN.
Junction box(s) for
oven & radiant
cooktop 22" from
floor
Add suitable filler
to match adjacent
cabinets when needed
to maintain toe kick
alignment
This installation is to achieve minimum gap between bottom of countertop and control panel.
Note: For this installation, the bottom trim will not be flush with a typical 4" toe kick.
Optional Undercounter Installation with 30" CleanDesign
or Sealed Burner Gas Cooktop (in inches)
Note: Cabinets installed adjacent to wall ovens must have an adhesion spec
of at least 194° temperature rating.
R
Listed by
Underwriters
Laboratories
For answers to your Monogram,
®
GE Profile
or
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center
®
service, 800.626.2000.
GE Appliances
Specification Created 7/01
JTP15AD/BD/CD/SD/WD - GE 30" Built-In Single Wall Oven
Installation Information: Before installing,
consult installation instructions packed
with product.
Single Oven Wall-Mount or Cabinet Installation
Dimensions (in inches)
Optional Undercounter Installation
with 36" Gas Cooktop (in inches)
Power cord
for counter unit
Junction box
for oven
Junction box in
adjacent cabinet
for counter unit
hook-up
2 (two) 90°elbows &
sufficient pipe to
connect in adjacent
cabinet
Right cabinet side
3/4" Support
Shut-off
valve
Pressure
regulator
1/2" Black
iron pipe
Union
Conduit
(48" long)
30" Built-in
oven
3-1/2" MIN.
Free space
4" To 4-1/2"
3-1/4
22
19-1/16" Cutout depth
Side View
Cutout width
28-1/2'' MIN.
28-5/8'' MAX.
29-3/4
28-1/4
30
Recommended
cutout location
32-1/2"
from floor
21
Junction
box
location
Allow minimum of 21'' for clearance
to adjacent corners, drawers, walls, or etc.
A=Allow 1" overlap of oven over top and bottom edges of cutout.
B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.
Conduit
(48" long)
5
27-1/4'' MIN.
27-5/16'' MAX.
Cutout height
A
B
23-1/2'' MIN.
Cutout depth
22'' MIN.
C
L
(Must Support 275 LBS.)
2 x 4 or
equivalent
runners
Suitable
bracing
to support
runners
21-5/8"
over centerline
of cabinet
For answers to your Monogram,
®
GE Profile
or
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center
®
service, 800.626.2000.
R
Listed by
Underwriters
Laboratories
KW Rating
240V 3.6
208V 2.7
Breaker Size
20 Amps
GE Appliances
Specification Created 7/01
JTP15AD/BD/CD/SD/WD - GE 30" Built-In Single Wall Oven
Features and Benefits
TrueTemp System
Extra Large 4.4 cu. ft. Capacity Self-Cleaning Oven
SmartSet Electronic Oven Controls
Sabbath Mode
2 Oven Racks with 6 Embossed Positions
True Frameless Glass Oven Door with Big ClearView Window
Model JTP15WDWW - White on white
Model JTP15BDBB - Black on black
Model JTP15ADAA - Almond on almond
Model JTP15CDCC - Bisque
Model JTP15SDSS - Stainless steel
/