Tyan B2891 User manual

Transport GT24

B2891

Service Engineer’s Manual

PREFACE

Copyright

This publication, including all photographs, illustrations, and soft-

ware, is protected under international copyright laws, with all rights

reserved. Neither this manual, nor any material contained herein,

may be reproduced without written consent of the manufacturer-.

Version 1.0

Disclaimer

Information contained in this document is furnished by TYAN Com-

puter Corporation and has been reviewed for accuracy and reliability

prior to printing. TYAN assumes no liability whatsoever, and dis-

claims any express or implied warranty, relating to sale and/or use of

TYAN products including liability or warranties relating to fitness for

a particular purpose or merchantability. TYAN retains the right to

make changes to product descriptions and/or specifications at any

time, without notice. In no event will TYAN be held liable for any

direct or indirect, incidental or consequential damage, loss of use,

loss of data or other malady resulting from errors or inaccuracies of

information contained in this document.

Trademark Recognition

All registered and unregistered trademarks and company names

contained in this manual are property of their respective owners

including, but not limited to the following.

TYAN and Transport GT24 B2891 are trademarks of TYAN Com-

puter Corporation.

AMD, Opteron, and combinations thereof are trademarks of AMD

Corporation.

Phoenix, PhoenixBIOS, and combinations thereof are trademarks of

Phoenix Technologies.

Microsoft Windows is a trademark of Microsoft Corporation.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

Winbond is a trademark of Winbond Electronics Corporation.

Portable Document Format (PDF) is a trademark of Adobe Corpora-

tion.

ii

Federal Communications Commission (FCC)

Notice for the USA Compliance Information State-

ment (Declaration of Conformity Procedure) DoC FCC

Part 15: This device complies with part 15 of the FCC

Rules

Operation is subject to the following conditions:

1) This device may not cause harmful interference, and

2) This device must accept any interference received including inter-

ference that may cause undesired operation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and the

receiver.

– Plug the equipment into an outlet on a circuit different from

that of the receiver.

Consult the dealer on an experienced radio/television technician for

help.

Notice for Canada

This apparatus complies with the Class B limits for radio interference

as specified in the Canadian Department of Communications Radio

Interference Regulations. (Cet appareil est conforme aux norms de

Classe B d’interference radio tel que specifie par le Ministere Cana-

dien des Communications dans les reglements d’ineteference

radio.)

Notice for Europe (CE Mark) This product is in conformity

with the Council Directive 89/336/EEC, 92/31/EEC

(EMC).

CAUTION: Lithium battery included with this board. Do not puncture,

mutilate, or dispose of battery in fire. Danger of explosion if battery

is incorrectly replaced. Replace only with the same or equivalent

type recommended by manufacturer. Dispose of used battery

according to manufacturer instructions and in accordance with your

local regulations.

iii

About this Manual

This manual provides you with instructions on installing your

Transport GT24, and consists of the following sections:

Chapter 1: Provides an Introduction to the Transport GT24

B2891 bare-bones, packing list, describes the

external components, gives a table of key compo-

nents, and provides block diagrams of the system.

Chapter 2: Covers procedures on installing the CPU, mem-

ory modules, an optional PCI card, and hard

drives.

Chapter 3: Covers removal and replacement procedures for

pre-installed components.

Appendix: Describes the differences between mainboard

BIOS and system BIOS. The cable connection

tables are also provided for reference of system

setup.

Conventions

The following conventions are used in the manual:

Note: Calls attention to important information.

Warning: Provides information to prevent harm

to user or damage to equipment.

iv

SAFETY INFORMATION

Before installing and using the Transport GT24, take note of the fol-

lowing precautions:

– Read all instructions carefully.

– Do not place the unit on an unstable surface, cart, or stand.

– Do not block the slots and opening on the unit, which are pro-

vided for ventilation.

– Only use the power source indicated on the marking label. If

you are not sure, contact the Power Company.

– The unit uses a three-wire ground cable, which is equipped

with a third pin to ground the unit and prevent electric shock.

Do not defeat the purpose of this pin. If your outlet does not

support this kind of plug, contact your electrician to replace

your obsolete outlet.

– Do not place anything on the power cord. Place the power

cord where it will not be in the way of foot traffic.

– Follow all warnings and cautions in this manual and on the

unit case.

– Do not push objects in the ventilation slots as they may touch

high voltage components and result in shock and damage to

the components.

– When replacing parts, ensure that you use parts specified by

the manufacturer.

– When service or repairs have been done, perform routine

safety checks to verify that the system is operating correctly.

– Avoid using the system near water, in direct sunlight, or near

a heating device.

– Cover the unit when not in use.

v

Table of Contents

Chapter 1:Overview

1.1 About the Transport GT24 B2891 . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.2 Product Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.4 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.5 About the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.5.1 System Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

1.5.2 System Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.5.3 LED Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.5.4 System Internal View . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

1.5.5 Motherboard Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

1.5.6 Motherboard Block Diagram. . . . . . . . . . . . . . . . . . . . . . .15

Chapter 2:Setting Up

2.0.1 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.0.2 Work Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.0.3 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.0.4 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

2.1 Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

2.1.1 Installing the Server in a Rack. . . . . . . . . . . . . . . . . . . . . .19

2.2 Installing Motherboard Components. . . . . . . . . . . . . . . . . . . . . . . 23

2.2.1 Removing the Chassis Cover. . . . . . . . . . . . . . . . . . . . . . . 23

2.2.2 Installing the CPU, Heatsink and Air Duct . . . . . . . . . . . . 24

2.2.3 Installing the Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

2.2.4 Installing a PCI Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

2.3 Installing the Hard Drive for B2891G24S4H/U4H . . . . . . . . . . . 30

2.4 Installing the Hard Drive for B2891G24S4-LC . . . . . . . . . . . . . . 32

2.4 Installing the Slim FDD (Option) . . . . . . . . . . . . . . . . . . . . . . . . . 34

Chapter 3:Replacing Pre-Installed Components

3.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

3.1.1 Work Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

3.1.2 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

3.1.3 Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

3.2 Disassembly Flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

3.3 Removing the Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

3.4 Replacing Motherboard Components . . . . . . . . . . . . . . . . . . . . . . 41

3.4.1 Disconnecting All Motherboard Cables . . . . . . . . . . . . . . 41

3.4.2 Removing the Motherboard. . . . . . . . . . . . . . . . . . . . . . . . 43

3.5 Replacing the Slim CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

vi

3.6 Replacing the LED Control Board . . . . . . . . . . . . . . . . . . . . . . . . 46

3.7 Replacing the M1010 Adapter Board . . . . . . . . . . . . . . . . . . . . . .48

3.7.1 M1010 Adapter Board Features. . . . . . . . . . . . . . . . . . . . . 49

3.7.2 System Fan Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

3.7.3 M1010 Adapter Board Connector Pin Definition . . . . . . . 52

3.8 Replacing the SATA or SCSI Backplane . . . . . . . . . . . . . . . . . . . 57

3.8.1 SATA Backplane (M1204) Features . . . . . . . . . . . . . . . . . 59

3.8.2 SCSI Backplane (M1205) Features . . . . . . . . . . . . . . . . . . 62

3.9 Replacing the Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Appendix I: BIOS Differences

Appendix II: Cable Connection Tables

Technical Support

Chapter 1: Overview 1

Chapter 1: Overview

1.1 About the Transport GT24 B2891

Congratulations on your purchase of the TYAN Transport

TM

GT24 (B2891), a highly-optimized rack-mountable barebone

system. The Transport GT24 (B2891) offers the latest in dual

processor server systems, providing a rich feature set and

incredible performance. Leveraging advanced technology

from AMD

®

and nVIDIA, the Transport GT24 (B2891) based

server system are capable of offering scalable 32 and 64-bit

computing, high-bandwidth memory design, and a lightning-

fast PCI Express bus implementation. The Transport

TM

GT24

(B2891) not only empowers your company in today’s

demanding IT environment but also offers a smooth path for

future application usage.

TYAN is also proud to deliver the Transport

TM

GT24 (B2891)

in two flavors: SCSI and SATA versions. Both versions can

support up to four (4) hot-swap hard drives, one (1) slim CD-

ROM and one (1) optional slim floppy disk drive (not

included). The Transport

TM

GT24 (B2891) uses TYAN’s latest

tooling-made chassis featuring a robust structure, tool-less

and modularized design, and a solid mechanical enclosure.

All of this provides the Transport

TM

GT24 (B2891) the power

and flexibility to meet the needs of nearly any server applica-

tion.

2 Chapter 1: Overview

1.2 Product Models

B2891G24S4H

B2891G24U4H

B2891G24S4-LC

Model HDD Bays

Hot-Swap

Support

HDD

Backplane

B2891G24U4H

Removable,

4 HDDs

Yes

4-port Ultra

SCSI

B2891G24S4H

Removable,

4 HDDs

Yes 4-po rt SATA

B2891G24S4-LC

Internal (Fixed),

4 HDDs

No None

Chapter 1: Overview 3

1.3 Features

Enclosure

• Industry 19” rack-mountable 1U

chassis storage bay

– (4) 3.5” HDD bays

– (1) slim line CD-ROM bay

– (1) slim line FDD bay

• Dimension: D 25.4 x W 17.2 x H

1.72 inch (645x436x43.6mm)

Processors

• Supports one or two AMD Opter-

on

TM

200 series processors

Chipset

• nVIDIA nForce4 Professional +

AMD-8131 Hyper Transport PCI-X

Tunnel

• Winbond W83627HF Super I/O chip

• ADT7463 Hardware monitor IC

Memory

• Eight 184-pin 2.5-Volt DDR DIMM

sockets

• Supports up to 16GB of Registered,

ECC DDR400/333 memory

• Supports Chipkill technology

Expansion Slots

• One 64-bit 100MHz (3.3V) PCI-X

slot, supporting low profile card (for

S4H, S4-LC sku only)

• One PCI-E x16 slot

• Tyan TARO SO-DIMM connector for

add-on storage controller card

Back I/O Ports

• One keyboard & one PS/2 mouse

ports

• Two RJ45 10/100/1000 Base-T port

with activity LED

• Two USB 2.0 ports

• One 9-pin UART serial port

• One 15-pin VGA port

Front Panel Features

• I/O

– (2) USB 2.0 ports

• LED indicators

– Power LED

– (2) LAN LEDs

– HDD active LED

• Switches

– Power switch

– Reset switch

Storage Controller

• Model B2891G24U4H:

– Add-on Tyan M7901 SCSI con-

troller card (Adaptec AIC7901

single channel Ultra320 SCSI

controller), connected to Tyan

TARO SO-DIMM

– Supporting HostRAID 0,1 & 10

• Model B2891G24S4H/S4-LC

– Two dual-port SATAII controllers

integrated in nVIDIA nForce4 Pro

chip

– Supporting 3Gb/s per port

– Supporting RAID 0, 1, 0+1 and

nVIDIA Morphing RAID (allowing

to change the RAID type on the

fly)

Storage

• Model B2891G24U4H: SCSI ver-

sion, supports up to 4 hot-swappa-

ble Ultra320/160/ SCSI HDDs

• Model B2891G24S4H: SATA ver-

sion, supports up to 4 hot-swappa-

ble SATA HDDs

• Model B2891G24S4-LC: SATA ver-

sion, supports up to 4 internal SATA

HDDs.

• Optional slim line CD-ROM, DVD-

ROM and FDD

Networking

• (2) Gigabit Ethernet ports (Broad-

com BCM5704 dual port controller)

connected to 133MHz PCI-X bus

Video

• ATI RAGE XL PCI graphics control-

ler

• 8MB Frame Buffer of video memory

Motherboard

• Tyan Thunder K8SRE S2891G2NR

• E-ATX footprint (13” x 12”)

.

4 Chapter 1: Overview

Server Management

• Automatic fan speed control

• Chassis intrusion alert

• Supports Tyan Server Management

(TSM)

• Tyan SMDC, IMPI v1.5 compliant

remote server management (option)

Power Supply

• EPS 12V, 1U, 500W with PFC

• 100V~240V AC input

Regulatory

• FCC Class B (Declaration of Con-

formity)

• CE (Declaration of Conformity)

Environment Temperature

• Operating temperature 5

o

C~35

o

C

• Non-operating temperature -40

o

C ~

70

o

C

Chapter 1: Overview 5

1.4 Unpacking

If any items are missing or appear damaged, contact your

retailer or browse to TYAN’s Web site for service:

http://www.tyan.com.

The Web site also provides information on other TYAN prod-

ucts, plus FAQs, compatibility lists, BIOS settings, and more.

1 x Tyan driver CD

SMDC Kit

Power Cords

Left to right: Europe, US

HDD Screws

Mounting Ears & Screws

FDD Kit

FDD Cable

FDD Backplane

FDD Backplane Cable

FDD Rails & Screws

FDDs

1pcs for S4H, S4-LC sku

3pcs for U4H sku

6 Chapter 1: Overview

Mainboard Manual

Barebone Manual

Heatsink x 2

Rail Kit

Mounting Bracket x 4

Sliding Brackets

Front L-Bracket x 2

Rear L-Bracket x 2

Screws Kit

Front

Rear

Sliding Rails x 2

Chapter 1: Overview 7

1.5 About the Product

This section contains the hardware diagrams and a block dia-

gram of the GT24 system.

1.5.1 System Front View

*Reserved: Reserved LED for future upgrade

1.5.2 System Rear View

CD-ROM Drive

Hard Drive Bay x 4

HDD activity LED

Power switch

Power LED

Reset

switch

USB ports

Warning LED

LAN LEDs

*Reserved

Power Supply Socket

PS/2 Mouse/Keyboard Ports

Serial Port

VGA Port

LAN Port x 2

PCI-X Slot

USB Port

Power Supply LED

PCI-E Slot

8 Chapter 1: Overview

1.5.3 LED Definition

Front Panel

Rear I/O LED

LED Color State Description

Power Green

OFF

ON

OFF

Power ON

Power OFF

HDD Activity Amber

OFF

Blinking

OFF

HDD access activity

No disk activity

LAN1/LAN2 Activity Green

Green

OFF

ON

Blinking

OFF

LAN connected

LAN access activity

LAN disconnected

Warning Reserved LED for future upgrade. It is not functional in

the B2891 barebone now.

Hot Swappable HDD

Tray Power LED

Green

OFF

ON

OFF

Power connected

Power disconnected

Hot Swappable

HDD Tray Access

LED (U4H only)

Amber

OFF

Blinking

OFF

HDD access activity

No disk activity

LED Color State Description

RJ45 NIC1 Linkage

(Left Side)

Green

OFF

ON

Blinking

OFF

LAN linked

LAN accessing

No LAN linked

RJ45 NIC1 Mode

(Right Side)

Amber

Green

OFF

ON

OFF

Gigabit mode

100M mode

10M mode

RJ45 NIC2 Linkage

(Left Side)

Green

OFF

ON

Blinking

OFF

LAN linked

LAN accessing

No LAN linked

RJ45 NIC2 Mode

(Right Side)

Amber

Green

OFF

ON

OFF

Gigabit mode

100M mode

10M mode

Chapter 1: Overview 9

NOTE: “Right” or “Left” is viewed from the rear.

Delta Power

Supply LED

Green

Amber

OFF

ON

1Hz Blinking

ON

1Hz Blinking

OFF

Output ON and OK

AC present/Only 5Vsb ON

Power supply critical event

causing a shutdown: fail-

ure, OCP, OVP, fan fail

Power supply warning

event where the power

supply continues to oper-

ate: high temp., high

power, high current, slow

fan

No AC power

10 Chapter 1: Overview

1.5.4 System Internal View - B2891G24S4H

1

4

12

10

11

5

6

7

8

1. Tyan TARO Connector

2. PCI-E Slot

3. Four SATA Connectors

4. EPS 12V Power Supply

5. Air Duct

6. System Fans (Left to right:

FAN5, FAN4, FAN3, FAN2,

FAN1)

7. Adapter Board

8. SATA Backplane

9. LED Control Board Cable

10. CD-ROM Cable

11. Slim CD-ROM

12. Four SATA HDDs

13. PCI-X Slot

2

3

9

13

Chapter 1: Overview 11

B2891G24S4-LC

1

3

9

8

4

5

6

1. Tyan TARO Connector

2. PCI-E Slot

3. EPS 12V Power Supply

4. Air Duct

5. System Fans (Left to right:

FAN5, FAN4, FAN3, FAN2,

FAN1)

6. Adapter Board

7. LED Control Board Cable

8. Slim CD-ROM

9. Four SATA HDDs

10. PCI-X Slot

2

7

10

12 Chapter 1: Overview

B2891G24U4H

1

3

12

10

11

4

5

6

7

1. Tyan TARO Connector

2. PCI-E Slot

3. EPS 12V Power Supply

4. Air Duct

5. System Fans (Left to right:

FAN5, FAN4, FAN3, FAN2,

FAN1)

6. Adapter Board

7. SCSI Backplane

8. LED Control Board Cable

9. SCSI daughter card

10. CD-ROM Cable

11. Slim CD-ROM

12. Four SCSI HDDs

2

8

9

Page is loading ...

Tyan B2891 User manual

This manual is also suitable for

Tyan B2891 User manual

Related papers

Other documents