Tyan Transport GT24 B3992 User manual

Transport GT24

B3992

Service Engineer’s Manual

PREFACE

Copyright

This publication, including all photographs, illustrations, and soft-

ware, is protected under international copyright laws, with all rights

reserved. Neither this manual, nor any material contained herein,

may be reproduced without written consent of the manufacturer-.

Version 1.0

Disclaimer

Information contained in this document is furnished by TYAN Com-

puter Corporation and has been reviewed for accuracy and reliability

prior to printing. TYAN assumes no liability whatsoever, and dis-

claims any express or implied warranty, relating to sale and/or use of

TYAN products including liability or warranties relating to fitness for

a particular purpose or merchantability. TYAN retains the right to

make changes to product descriptions and/or specifications at any

time, without notice. In no event will TYAN be held liable for any

direct or indirect, incidental or consequential damage, loss of use,

loss of data or other malady resulting from errors or inaccuracies of

information contained in this document.

Trademark Recognition

All registered and unregistered trademarks and company names

contained in this manual are property of their respective owners

including, but not limited to the following.

TYAN and Transport GT24 B3992 are trademarks of TYAN Com-

puter Corporation.

AMD, Opteron, and combinations thereof are trademarks of AMD

Corporation.

AMI, AMIBIOS, and combinations thereof are trademarks of Phoe-

nix Technologies.

Microsoft Windows is a trademark of Microsoft Corporation.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

Winbond is a trademark of Winbond Electronics Corporation.

Portable Document Format (PDF) is a trademark of Adobe Corpora-

tion.

ii

Federal Communications Commission (FCC)

Notice for the USA Compliance Information State-

ment (Declaration of Conformity Procedure) DoC FCC

Part 15: This device complies with part 15 of the FCC

Rules

Operation is subject to the following conditions:

1) This device may not cause harmful interference, and

2) This device must accept any interference received including inter-

ference that may cause undesired operation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and the

receiver.

– Plug the equipment into an outlet on a circuit different from

that of the receiver.

Consult the dealer on an experienced radio/television technician for

help.

Notice for Canada

This apparatus complies with the Class B limits for radio interference

as specified in the Canadian Department of Communications Radio

Interference Regulations. (Cet appareil est conforme aux norms de

Classe B d’interference radio tel que specifie par le Ministere Cana-

dien des Communications dans les reglements d’ineteference

radio.)

Notice for Europe (CE Mark) This product is in conformity

with the Council Directive 89/336/EEC, 92/31/EEC

(EMC).

CAUTION: Lithium battery included with this board. Do not puncture,

mutilate, or dispose of battery in fire. Danger of explosion if battery

is incorrectly replaced. Replace only with the same or equivalent

type recommended by manufacturer. Dispose of used battery

according to manufacturer instructions and in accordance with your

local regulations.

iii

About this Manual

This manual provides you with instructions on installing your

Transport GT24, and consists of the following sections:

Chapter 1: Provides an Introduction to the Transport GT24

B3992 barebones, packing list, describes the

external components, gives a table of key compo-

nents, and provides block diagrams of the system.

Chapter 2: Covers procedures on installing the CPU, mem-

ory modules, an optional PCI card, and hard

drives.

Chapter 3: Covers removal and replacement procedures for

pre-installed components.

Appendix: Describes the differences between mainboard

BIOS and system BIOS. The cable connection

tables are also provided for reference of system

setup.

Conventions

The following conventions are used in the manual:

Note: Calls attention to important information.

Warning: Provides information to prevent harm

to user or damage to equipment.

iv

SAFETY INFORMATION

Before installing and using the Transport GT24, take note of the fol-

lowing precautions:

– Read all instructions carefully.

– Do not place the unit on an unstable surface, cart, or stand.

– Do not block the slots and opening on the unit, which are pro-

vided for ventilation.

– Only use the power source indicated on the marking label. If

you are not sure, contact the Power Company.

– The unit uses a three-wire ground cable, which is equipped

with a third pin to ground the unit and prevent electric shock.

Do not defeat the purpose of this pin. If your outlet does not

support this kind of plug, contact your electrician to replace

your obsolete outlet.

– Do not place anything on the power cord. Place the power

cord where it will not be in the way of foot traffic.

– Follow all warnings and cautions in this manual and on the

unit case.

– Do not push objects in the ventilation slots as they may touch

high voltage components and result in shock and damage to

the components.

– When replacing parts, ensure that you use parts specified by

the manufacturer.

– When service or repairs have been done, perform routine

safety checks to verify that the system is operating correctly.

– Avoid using the system near water, in direct sunlight, or near

a heating device.

– Cover the unit when not in use.

v

Table of Contents

Chapter 1:Overview

1.1 About the TYAN Transport GT24 B3992 . . . . . . . . . . . . . . . . . . . 1

1.2 Product Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

1.3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

1.4 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.5 About the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.5.1 System Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.5.2 System Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.5.3 LED Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.5.4 System Internal View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

1.5.5 Motherboard (S3992) Block Diagram . . . . . . . . . . . . . . . . 11

1.5.6 S3992 Board Parts, Jumpers, and Connectors . . . . . . . . . . 12

Chapter 2:Setting Up

2.0.1 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.0.2 Work Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.0.3 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.0.4 Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.1 Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.1.1 Installing the Server in a Rack. . . . . . . . . . . . . . . . . . . . . . 15

2.2 Installing Motherboard Components. . . . . . . . . . . . . . . . . . . . . . . 21

2.2.1 Removing the Chassis Cover. . . . . . . . . . . . . . . . . . . . . . . 21

2.2.2 Installing the CPU, Heatsink and Air Duct . . . . . . . . . . . . 22

2.2.3 Installing the Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

2.2.4 Installing a PCI-E Card . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

2.3 Installing the Hard Drive for B3992G24V4H. . . . . . . . . . . . . . . . 29

Chapter 3:Replacing Pre-Installed Components

3.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

3.1.1 Work Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

3.1.2 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

3.1.3 Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

3.2 Disassembly Flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

3.3 Removing the Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

3.4 Replacing Motherboard Components . . . . . . . . . . . . . . . . . . . . . . 35

3.4.1 Disconnecting All Motherboard Cables . . . . . . . . . . . . . . 35

3.4.2 Removing the Motherboard. . . . . . . . . . . . . . . . . . . . . . . . 36

3.5 Replacing the Slim DVD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . 37

3.6 Replacing the LED Control Board . . . . . . . . . . . . . . . . . . . . . . . . 39

3.7 Replacing the M1012 Adapter Board . . . . . . . . . . . . . . . . . . . . . . 41

vi

3.7.1 M1012 Adapter Board Features. . . . . . . . . . . . . . . . . . . . . 42

3.7.2 M1012 Adapter Board Connector Pin Definition . . . . . . . 43

3.8 Replacing the SAS/SATA Backplane. . . . . . . . . . . . . . . . . . . . . . 48

3.8.1 SAS/SATA Backplane (M1208) Features. . . . . . . . . . . . . 50

3.9 Replacing the Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Appendix I: BIOS Differences

Appendix II: Cable Connection Tables

Appendix III: Installing SMDC Cards

Technical Support

Chapter 1: Overview 1

Chapter 1: Overview

1.1 About the TYAN Transport GT24 B3992

Congratulations on your purchase of the TYAN Transport

TM

GT24 B3992, a highly-optimized rack-mountable barebone

system. The TYAN Transport GT24 B3992 offers the latest in

dual processor server systems, providing a rich feature set

and incredible performance. Leveraging advanced technol-

ogy from AMD

®

, the TYAN Transport GT24 B3992 based

server system are capable of offering scalable 32 and 64-bit

computing, high-bandwidth memory design, and a lightning-

fast PCI-X bus implementation. The TYAN Transport

TM

GT24

B3992 not only empowers your company in today’s demand-

ing IT environment but also offers a smooth path for future

application usage.

The TYAN Transport

TM

GT24 B3992 uses TYAN’s latest tool-

ing-made chassis featuring a robust structure, tool-less and

modularized design, and a solid mechanical enclosure. All of

this provides the TYAN Transport

TM

GT24 B3992 the power

and flexibility to meet the needs of nearly any server applica-

tion.

2 Chapter 1: Overview

1.2 Product Models

B3992G24V4H

Model HDD Bays

Hot-Swap

Support

HDD

Backplane

B3992G24V4H

Removable,

4 HDDs

Yes

4-port

SAS/SATA

.

Chapter 1: Overview 3

1.3 Features

Enclosure

• Industry 19” rack-mountable 1U

chassis

• Storage bay

– (4) 3.5” HDD bays

– (1) slim line ODD bay

• Dimension:

D 25.4 x W 17.17 x H 1.71 inch

(645x436x43.6mm)

Motherboard

• TYAN Thunder K8S S3992G3NR

• Extended ATX footprint (13” x 12”)

Processors

•Dual µPGA 1207-pin ZIF sockets

• Supports one or two AMD

Opteron

TM

2000 series processors

(2XXX Series and 2XXX HE Series)

Chipset

• ServerWorks BCM5780 (HT2000)

• BCM5785(HT1000) chipset

• National PC87417 Super I/O chip

Memory

• 128-bit dual channel memory bus.

• Total sixteen (16) 240-pin 1.8-Volt

DDRII DIMM sockets (8 on CPU1

and 8 on CPU2).

• Supports up to 32GB DDR II

667MHz Registered, ECC module

supported.

Video

• ATI® ES1000 controller

• 32MB DDR Frame Buffer

BIOS

• AMI BIOS on 8Mbit LPC Flash ROM

• ACPI 2.0 and SRAT support

• PXE via Ethernet, USB device boot

• SMBIOS 2.3.1, BBS 1.1 compliant

• Headless Operation via serial con-

sole redirect

• 48-bit LBA Support

Expansion Slots

• One (1) PCI Express x16 slots

• One (1) Tyan “TARO” SO-DIMM

socket

Back I/O Ports

• One keyboard & one PS/2 mouse

ports

• Two USB 2.0 ports

• One 15-pin VGA port

• Two 10/100/1000 RJ-45 LAN ports

• One 10/100 RJ-45 LAN port

Front Panel Features

•I/O

– (2) USB 2.0 ports

• LED indicators

– Power LED

– (2) LAN LEDs

– HDD active LED

– Warning LED

–ID LED

•Switches

– Power switch

– NMI switch

– Reset switch

– ID switch

Storage Controller

• Support RAID 0, 1, 5, 10

Storage Backplane

• One (1) 4-port SAS/SATA back-

plane, supporting up to 4 SAS/SATA

HDDs.

Networking

• Dual GbE LAN (from BCM5780)

– Embedded in BCM5780

– Two 10/100/1000 RJ-45 LAN

ports w/ LED

• One Intel i82551QM fast Ethernet

controller

– One 10/100 RJ-45 LAN port w/

LED

– Operating on 32bit/33MHz PCI

bus

Power Supply

• EPS 12V, 1U, 500W with PFC

• 100V~240V AC input

4 Chapter 1: Overview

Server Management

• Automatic fan speed control

• Support Tyan Servr Management

(TSM)

• Option TYAN SMDC M3291, IPMI

v2.0 compliant remote server man-

agement kit

Regulatory

• FCC Class B (Declaration of Con-

formity)

• CE (Declaration of Conformity)

Environment Temperature

• Operating temperature (5

o

C~35

o

C)

• Non-operating temperature (-40

o

C~

70

o

C)

Chapter 1: Overview 5

1.4 Unpacking

If any items are missing or appear damaged, contact your

retailer or browse to TYAN’s Web site for service:

http://www.tyan.com.

The Web site also provides information on other TYAN prod-

ucts, plus FAQs, compatibility lists, BIOS settings, and more.

1 x Tyan driver CD

Power Cords

Left to right: Europe, US

HDD Screws

Mounting Ears & Screws

Mainboard Manual

Barebone Manual

CPU1 Heatsink

CPU2 Heatsink

6 Chapter 1: Overview

Rail Kit

Mounting Bracket x 4

Sliding Brackets

Front L-Bracket x 2

Rear L-Bracket x 2

Screws Kit

Front

Rear

Sliding Rails x 2

Chapter 1: Overview 7

1.5 About the Product

This section contains the hardware diagrams and a block dia-

gram of the GT24 system.

1.5.1 System Front View

B3992G24V4H

1.5.2 System Rear View

HDD activity LED

Power switch

Power LED

Reset switch

USB ports

Warning LED

2 x LAN LEDs

ID Switch

NMI switch

ID LED

DVD-ROM Drive

Hard Drive Bay x 4

Power Supply

Socket

PS/2 Mouse/Keyboard Ports

Serial Port

VGA Port

LAN Port (NIC1)

PCI-E Slot

ID LED

LAN Port (NIC2)

LAN Port (NIC3)

Power Supply LED

2 USB ports

8 Chapter 1: Overview

1.5.3 LED Definition

Front Panel

LED Color State Description

Power Green

OFF

ON

OFF

Power ON

Power OFF

HDD Activity Amber

OFF

Random Blinking

OFF

HDD access activity

No disk activity

LAN1/LAN2 Activity Green

Green

OFF

ON

Blinking

OFF

LAN linked

LAN accessing

No LAN linked

Warning Red

OFF

ON

OFF

Fan fails

Normal

ID LED Blue

OFF

ON

OFF

System is identified

System is not identified

Hot Swappable HDD

Tray Power LED

Green

OFF

ON

OFF

Power connected

Power disconnected

Hot Swappable SATA

HDD Access LED

Amber

OFF

Random Blinking

OFF

HDD access activity

No disk activity

Hot Swappable SAS

HDD Access LED

Amber

OFF

ON

Random Blinking

OFF

HDD ready

HDD access activity

HDD not ready

Chapter 1: Overview 9

Rear I/O LED

LED Color State Description

RJ45 NIC1/NIC2 Activity

(Left Side)

Green

OFF

Blinking

OFF

LAN activity

No LAN activity

RJ45 NIC1/NIC2 Linkage

(Right Side)

Green

OFF

ON

OFF

LAN linked

NO LAN linked

RJ45 NIC3 Linkage/ Activity

(Left Side)

Green

OFF

ON

Blinking

OFF

10Mb/100Mb linked

10Mb/100Mb activity

No LAN linked

RJ45 NIC3 Linkage/ Activity

(Right Side)

Green ON 100M linked and activity

ID LED Blue

OFF

ON

OFF

System is identified

System is not identified

Delta Power

Supply LED

Green

Amber

OFF

ON

1Hz Blinking

ON

1Hz Blinking

OFF

Output ON and OK

AC present/Only 5Vsb ON

Power supply critical event

causing a shutdown:

failure, OCP, OVP, fan fail

Power supply warning

event where the power

supply continues to

operate: high temp., high

power, high current, slow

fan

No AC power

10 Chapter 1: Overview

1.5.4 System Internal View

B3992G24V4H

8

10

9

3

4

5

6

7

1. PCI-Slot (with riser card

M2083)

2. EPS 12V Power Supply

3. CPU Sockets

4. System Fans (Top-Right to

left: FAN1, FAN2, FAN3,

FAN4, FAN5; Bottom-Right to

left: FAN6, FAN7, FAN8,

FAN9)

5. Adapter Board

6. SAS/SATA Backplane

7. LED Control Board Cable

8. Four SATA HDDs

9. Slim DVD-ROM

10. DVD-ROM Cable

11. Memory Slots

11

1

2

Chapter 1: Overview 11

1.5.5 Motherboard (S3992) Block Diagram

12 Chapter 1: Overview

1.5.6 S3992 Board Parts, Jumpers, and Connectors

J49 Front Panel Header

JP1/

JP2

SMDC/ASF2.0 Select Jumper

Pin 1-2 Closed: ASF2.0 (default)

Pin 2-3 Closed: SMDC card

JP5/

JP8

PCI-E Mode Select Jumper

Pin 1-2 Closed: based on card (default)

Pin 2-3 Closed: force to run at PCI mode

JP3

VGA Enable/Disable Jumper

Pin 1-2 Closed: enabled (default)

Pin 2-3 Closed: disabled

JP7/

JP9

PCI-E Frequency Select Jumper

Pin 1-2 Closed: based on card (default)

Pin 2-3 Closed: 100MHz or less

JP4

LAN3 Enable/Disable Jumper

Pin 1-2 Closed: enabled (default)

Pin 2-3 Closed: disabled

JP10

Clear CMOS Jumper

Pin 1-2 Closed: normal (default)

Pin 2-3 Closed: clear CMOS

CPU1

KB/MS

LAN3

USB x 2

COM1

VGA

LAN2

LAN1

CPU2

PW2

PW1

CPU1_DIMMA0

CPU1_DIMMB0

CPU1_DIMMA1

CPU1_DIMMB1

CPU1_DIMMA2

CPU1_DIMMB2

CPU1_DIMMA3

CPU1_DIMMB3

CPU2_DIMMA0

CPU2_DIMMA1

CPU2_DIMMA2

CPU2_DIMMA3

CPU2_DIMMB0

CPU2_DIMMB1

CPU2_DIMMB2

CPU2_DIMMB3

PCI-E1

PCI-E2

PCI

PCIX-P1

PCIX-S2

PCIX-S1

COM2

(J9)

FDD (J10)

SMDC (J18)

SATA3

IPMB (J19)

J43

JP2

IDE (J44)

USB2 (J28)

JP5 J47

J46

J49

CPUFAN1

FAN3

JP8

JP3

JP1

SATA2

SATA1

SATA0

JP7

JP9

FAN4

FAN1

FAN2

JP4

SO-DIMM Socket

JP10

FAN5

FAN6

CPUFAN2

J60

LED1

LED2

SMbus Clock

SMbus Data

5Vsb

NMI

VCC

Reset SW+

GND

HDD LED-

HDD LED+

17

15

13

11

9

7

5

3

1

18

16

14

12

10

8

6

4

2

NC

GND

Key

WLED-

WLED+

GND

Power S/W+

Power LED-

Power LED+

FAN5/FAN6

- Fan Conector

CPUFAN1~2/FAN1~4

- Fan Connector with Speed

Control

J9

- COM2 Header

J18

- SMDC Connector

J19

- IPMB Connector

J28

- USB Front Panel Connector

J47

- LAN & ID LED and ID

Switch

J43/J46/J60

- Reserved for OEM only

Page is loading ...

Tyan Transport GT24 B3992 User manual

Tyan Transport GT24 B3992 User manual

Related papers

Other documents