Nortel Networks 1000M User manual

Nortel Communication Server 1000

Nortel Communication Server 1000 Release 5.5

Communication Server 1000M and

Meridian 1

Large System Installation and Commissioning

Document Number: NN43021-310

Document Release: Standard 02.01

Date: December 2007

Year Publish FCC TM

Sourced in Canada

LEGAL NOTICE While the information in this document is believed to be accurate and reliable, except as

otherwise expressly agreed to in writing. NORTEL PROVIDES THIS DOCUMENT "AS IS" WITHOUT

WARRANTY OR CONDITION OF ANY KIND, EITHER EXPRESS OR IMPLIED. The information and/or

products described in this document are subject to change without notice.

Nortel, Nortel (Logo), the Globemark, SL-1, Meridian 1, and Succession are trademarks of Nortel Networks. All

other trademarks are the property of their respective owners.

Title page

Page 3 of 456

Communication Server 1000M and Meridian 1 Large System Installation and Commissioning

10

Contents

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

New in this release . . . . . . . . . . . . . . . . . . . . . . . . . 11

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Other . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

List of Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . 13

How to get help . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Getting help from the Nortel Web site . . . . . . . . . . . . . . . . . . . . . . . . . 19

Getting help over the telephone from a Nortel Solutions Center . . . . . 19

Getting help from a specialist by using an Express Routing Code . . . . 20

Getting help through a Nortel distributor or reseller .. . . . . . . . . . . . . . 20

Finding the latest updates

on the Nortel web site . . . . . . . . . . . . . . . . . . . . . . . 21

System information . . . . . . . . . . . . . . . . . . . . . . . . . 23

Subject .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Applicable systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Intended audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Conventions .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

NTP feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Related information .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Page 4 of 456 Contents

NN43021-310 Standard 02.01 December 2007

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Overview .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Summary of procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Preparing for installation . . . . . . . . . . . . . . . . . . . . 37

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

System equipment – UEMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

System options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Cable routing guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Equipment handling precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Preparing the equipment for installation .. . . . . . . . . . . . . . . . . . . . . . . 62

Placing the fourth module on a column . . . . . . . . 65

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Overview .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Placing the fourth module on a column . . . . . . . . . . . . . . . . . . . . . . . . 65

Positioning and leveling equipment . . . . . . . . . . . 71

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Positioning and leveling the equipment . . . . . . . . . . . . . . . . . . . . . . . . 71

Installing AC power . . . . . . . . . . . . . . . . . . . . . . . . 77

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

AC-powered systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Safety ground/protective earth and logic return wiring . . . . . . . . . . . . 78

Installing safety ground/protective earth and logic return wiring .. . . . 82

Installing UPS ground cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Installing overhead cable tray kits . . . . . . . . . . . . 89

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Contents Page 5 of 456

Communication Server 1000M and Meridian 1 Large System Installation and Commissioning

Installing overhead cable tray kits .. . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Installing DC power . . . . . . . . . . . . . . . . . . . . . . . . . 93

Contents .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

DC-powered systems .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Candeo DC power systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Planning and designating a

Main Distribution Frame . . . . . . . . . . . . . . . . . . . . . 133

Contents .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

About terminations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

Installation and designation .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

Terminal block requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134

Installing the BIX cross-connect terminal .. . . . . . . . . . . . . . . . . . . . . . 134

Installing the Krone cross-connect system (UK) . . . . . . . . . . . . . . . . . 138

Installing Power Failure Transfer Units . . . . . . . . . 145

Contents .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

PFTU configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

Installing a PFTU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148

Connecting trunks and telephones .. . . . . . . . . . . . . . . . . . . . . . . . . . . . 149

Installing QUA6 PFTUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

Configuring the system monitor . . . . . . . . . . . . . . 151

Contents .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

System monitor cabling .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

Configuring the System Monitor .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153

Cabling the System Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157

Alarm interfacing to Candeo .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165

Configuring the alarm ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168

Customizing alarms .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169

Page 6 of 456 Contents

NN43021-310 Standard 02.01 December 2007

Connecting a system terminal or modem . . . . . . 171

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171

About the system terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171

Connecting a terminal .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173

Connecting a terminal to a COM port . . . . . . . . . . . . . . . . . . . . . . . . . 174

Connecting a switch box and terminal to

COM1 and COM2 ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175

Connecting a switch box and terminal to

SDI and COM1 ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177

Connecting a modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178

Configuring a modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180

Connecting a modem to an SDI port . . . . . . . . . . . . . . . . . . . . . . . . . . 181

Connecting a modem to switch box, COM2 ports, SDI ports . . . . . . . 183

Cabling Common Equipment in a

Single Group system . . . . . . . . . . . . . . . . . . . . . . . 187

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187

Cabling guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187

Core/Net module .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189

Cabling the Core side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193

Cabling the I/O panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195

Cabling the Network side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197

Configuring and cabling the Clock Controllers . . . . . . . . . . . . . . . . . . 198

Network Group 0: Shelf 0 to Shelf 1 . . . . . . . . . . . . . . . . . . . . . . . . . . 199

Connecting the 3PE faceplates in the Core/Net modules . . . . . . . . . . . 199

Inspecting CNI to 3PE factory installed cables . . . . . . . . . . . . . . . . . . 200

Connecting the Core/Net backplanes . . . . . . . . . . . . . . . . . . . . . . . . . . 202

Optioning the System Utility Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203

Connecting Core modules to a LAN .. . . . . . . . . . . . . . . . . . . . . . . . . . 204

Contents Page 7 of 456

Communication Server 1000M and Meridian 1 Large System Installation and Commissioning

Cabling Common Equipment in a

Multi Group system . . . . . . . . . . . . . . . . . . . . . . . . . 207

Contents .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207

Cabling guidelines .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207

Core/Net module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209

Cabling the Core/Net module backplane . . . . . . . . . . . . . . . . . . . . . . . 212

Disconnecting cables from the Core/Net module backplane . . . . . . . . 213

Optioning the System Utility Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215

Core shelf cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216

Installing the CP PIV to I/O panel cables . . . . . . . . . . . . . . . . . . . . . . . 220

Connecting the Core module to a LAN .. . . . . . . . . . . . . . . . . . . . . . . . 223

Cabling a Dual Ring Fiber Network . . . . . . . . . . . . . . . . . . . . . . . . . . . 224

FIJI card cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228

Installing the Shelf 0 fiber optic ring (ascending) .. . . . . . . . . . . . . . . . 231

Installing the Shelf 1 fiber optic ring (descending) .. . . . . . . . . . . . . . . 232

FIJI to FIJI cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234

Connecting the Clock Controller cables . . . . . . . . . . . . . . . . . . . . . . . . 235

Cabling network modules and loops . . . . . . . . . . . 239

Contents .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239

Network-to-network cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239

Network module connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240

Network Group 0: Shelf 0 to Shelf 1 .. . . . . . . . . . . . . . . . . . . . . . . . . . 240

Connecting the 3PE faceplates in the Core/Net modules . . . . . . . . . . . 240

Connecting the Core/Net backplanes . . . . . . . . . . . . . . . . . . . . . . . . . . 241

Connecting Groups 1 through 7: Shelf 0 to Shelf 1 . . . . . . . . . . . . . . . 242

Connecting the Network modules to the Core/Net modules .. . . . . . . . 245

Connecting the 3PE cables to the 3PE fanout panels . . . . . . . . . . . . . . 250

Cabling a Superloop Network Card – single column . . . . . . . . . . . . . . 252

Cabling a Superloop Network Card – multiple columns . . . . . . . . . . . 256

Page 8 of 456 Contents

NN43021-310 Standard 02.01 December 2007

Cabling lines and trunks . . . . . . . . . . . . . . . . . . . . 261

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261

Overview .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261

Cabling an IPE Module or Media Gateway . . . . . . . . . . . . . . . . . . . . . 263

Connecting lines and trunks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266

Powering up the system and initial loading . . . . . 299

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299

Overview .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299

Installing the Security Device .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299

Preparing to power up – AC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302

Connecting the AC power source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302

Turning AC power ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303

Resetting the main circuit breakers (AC power) . . . . . . . . . . . . . . . . . 304

Preparing to power up – DC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306

Turning DC power ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306

Installing software .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308

Testing Core/Net 1 and Core/Net 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 330

Performing acceptance tests . . . . . . . . . . . . . . . . 335

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335

Acceptance tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335

Testing the module power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336

Testing the blower unit and thermal sensor . . . . . . . . . . . . . . . . . . . . . 337

Testing the sysload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339

Testing the system terminal and system monitor . . . . . . . . . . . . . . . . . 340

Testing the PFTU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341

Installing earthquake bracing . . . . . . . . . . . . . . . . 343

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343

Seismic-approved applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343

Contents Page 9 of 456

Communication Server 1000M and Meridian 1 Large System Installation and Commissioning

Installing seismic bracing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344

Drilling concrete floors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 347

Installing Kit A and Kit B anchor plates .. . . . . . . . . . . . . . . . . . . . . . . 349

Installing earthquake rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351

Positioning and leveling the system . . . . . . . . . . . . . . . . . . . . . . . . . . . 357

Installing non-seismic bracing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358

Installing a non-seismic anchor kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 359

Adding a module to a column . . . . . . . . . . . . . . . . 363

Contents .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 363

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 363

Adding a module to the base of a column . . . . . . . . . . . . . . . . . . . . . . . 364

Adding a module between two other modules . . . . . . . . . . . . . . . . . . . 370

Adding a module to the top of a column .. . . . . . . . . . . . . . . . . . . . . . . 374

Installing a Signaling Server . . . . . . . . . . . . . . . . . 383

Contents .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 383

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 384

Readiness checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 385

Installing the CP PM Signaling Server hardware . . . . . . . . . . . . . . . . . 387

Connections .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389

Installing the Signaling Server software . . . . . . . . . . . . . . . . . . . . . . . . 399

First boot of a new Nortel CP PM Signaling Server . . . . . . . . . . . . . . . 426

Unpacking Help files for Virtual Terminal Emulator . . . . . . . . . . . . . . 445

Logging in to the Signaling Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . 445

Verifying a successful configuration .. . . . . . . . . . . . . . . . . . . . . . . . . . 447

Testing the Leader Signaling Server . . . . . . . . . . . . . . . . . . . . . . . . . . . 447

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 449

Page 10 of 456 Contents

NN43021-310 Standard 02.01 December 2007

Page 11 of 456

Communication Server 1000M and Meridian 1 Large System Installation and Commissioning

12

New in this release

Features

There are no new features in this NTP for CS 1000 Release 5.5.

Other

Revision History

December 2007

Standard 02.01. This document is up-issued for Communication Server 1000

Release 5.5.

July 2007

Standard 01.03. This document is up-issued for Communication Server 1000

Release 5.0.

July 2007

Standard 01.02. This document is up-issued for Communication Server 1000

Release 5.0.

May 2007

Standard 01.01. This document is up-issued for Communication Server 1000

Release 5.0. This document contains information previously contained in the

following legacy document, now retired: Communication Server 1000M and

Meridian 1: Large System Installation and Configuration (553-3021-210).

Page 12 of 456 New in this release

NN43021-310 Standard 02.01 December 2007

April 2006

Standard 4.00. This document is up-issued with corrections from CR

Q01311083. The corrections appear in the “Configuring the System Monitor'

section (page 153 to page 157).

August 2005

Standard 3.00. This document is up-issued to support Communication

Server 1000 Release 4.5.

September 2004

Standard 2.00. This document is up-issued to support Communication

Server 1000 Release 4.0.

October 2003

Standard 1.00. This document is a new NTP for Succession 3.0. It was created

to support a restructuring of the Documentation Library, which resulted in the

merging of multiple legacy NTPs. This new document consolidates

information previously contained in the following legacy documents, now

retired:

• Cabling Guide (553-3001-109)

• System Installation Procedures (553-3001-210)

Page 13 of 456

Communication Server 1000M and Meridian 1 Large System Installation and Commissioning

18

List of Procedures

Procedure 1

Preparing the equipment for installation . . . . . . . . . . . . . . . . . . . . . 62

Procedure 2

Placing the fourth module on a column . . . . . . . . . . . . . . . . . . . . . . 66

Procedure 3

Positioning and leveling the equipment . . . . . . . . . . . . . . . . . . . . . . 71

Procedure 4

Installing safety ground/protective earth and logic return wiring . 82

Procedure 5

Installing the UPS ground cabling . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Procedure 6

Installing the overhead cable tray kits . . . . . . . . . . . . . . . . . . . . . . . 90

Procedure 7

Installing and connecting the power plant frame ground leads . . . 113

Procedure 8

Installing safety ground/protective earth wiring . . . . . . . . . . . . . . . 123

Procedure 9

Connecting power from the power plant to the PDU (NT4N49AA) . 125

Procedure 10

Connecting UK power to the Four-Feed PDU . . . . . . . . . . . . . . . . . 129

Procedure 11

Installing the BIX cross-connect terminal . . . . . . . . . . . . . . . . . . . . 135

Procedure 12

Installing the Krone Test Jack Frame (UK) . . . . . . . . . . . . . . . . . . . . 138

Page 14 of 456

NN43021-310 Standard 02.01 December 2007

Procedure 13

Installing a PFTU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148

Procedure 14

Connecting trunks and telephones . . . . . . . . . . . . . . . . . . . . . . . . . 149

Procedure 15

Configuring the System Monitor (NT8D22) . . . . . . . . . . . . . . . . . . . 153

Procedure 16

Cabling the System Monitor (NT8D22) . . . . . . . . . . . . . . . . . . . . . . . 158

Procedure 17

Configuring the alarm ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169

Procedure 18

Connecting a terminal to a COM port . . . . . . . . . . . . . . . . . . . . . . . . 174

Procedure 19

Connecting a switch box and terminal to COM1 and COM2 ports 175

Procedure 20

Connecting a switch box and terminal to the SDI and COM1 ports 177

Procedure 21

Configuring a modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180

Procedure 22

Connecting a modem to an SDI port . . . . . . . . . . . . . . . . . . . . . . . . 181

Procedure 23

Connecting a modem to a switch box, COM2 and SDI ports . . . . . 183

Procedure 24

Installing the CP PIV to I/O panel cables . . . . . . . . . . . . . . . . . . . . . 196

Procedure 25

Connecting the Clock Controller cables . . . . . . . . . . . . . . . . . . . . . 199

Procedure 26

Connecting the 3PE faceplates in the Core/Net modules . . . . . . . . 200

Procedure 27

Inspecting NT4N29AA factory installed cables . . . . . . . . . . . . . . . . 200

Procedure 28

Connecting the Core/Net backplanes . . . . . . . . . . . . . . . . . . . . . . . . 202

Page 15 of 456

Communication Server 1000M and Meridian 1 Large System Installation and Commissioning

Procedure 29

Connecting the Core module to a LAN . . . . . . . . . . . . . . . . . . . . . . . 205

Procedure 30

Cabling the Core/Net module backplane . . . . . . . . . . . . . . . . . . . . . 213

Procedure 31

Disconnecting cable connectors from the backplane . . . . . . . . . . . 214

Procedure 32

Installing the CP PIV to I/O panel cables . . . . . . . . . . . . . . . . . . . . . 221

Procedure 33

Connecting the Core module to a LAN . . . . . . . . . . . . . . . . . . . . . . . 223

Procedure 34

Installing the Shelf 0 fiber optic ring (ascending) . . . . . . . . . . . . . . 231

Procedure 35

Installing the Shelf 1 fiber optic ring . . . . . . . . . . . . . . . . . . . . . . . . . 232

Procedure 36

Connecting the FIJI to FIJI cables . . . . . . . . . . . . . . . . . . . . . . . . . . . 234

Procedure 37

Connecting the Clock Controller cables . . . . . . . . . . . . . . . . . . . . . . 236

Procedure 38

Connecting the 3PE faceplates in the Core/Net modules . . . . . . . . 240

Procedure 39

Connecting the Core/Net backplanes . . . . . . . . . . . . . . . . . . . . . . . . 241

Procedure 40

Connecting Groups 1 through 7: Shelf 0 to Shelf 1 . . . . . . . . . . . . . 243

Procedure 41

Connecting the Network Shelf 0 3PE cards to Core/Net 0 . . . . . . . 251

Procedure 42

Connecting the Network Shelf 1 3PE cards to Core/Net 1 . . . . . . . 251

Procedure 43

Basic cabling for single-row network connections . . . . . . . . . . . . . 252

Procedure 44

Basic cabling for multiple-row network connections . . . . . . . . . . . 256

Page 16 of 456

NN43021-310 Standard 02.01 December 2007

Procedure 45

Cabling an IPE Module (NT8D37) or Media Gateway . . . . . . . . . . . 264

Procedure 46

Connecting lines and trunks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266

Procedure 47

Installing the Security Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300

Procedure 48

Preparing to power up – AC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302

Procedure 49

Option 1: Using the installed power plug (recommended) . . . . . . . 302

Procedure 50

Option 2: Hard-wiring the power connections (optional) . . . . . . . . 303

Procedure 51

Turning AC power on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303

Procedure 52

Resetting the main circuit breakers (AC power) . . . . . . . . . . . . . . . 304

Procedure 53

Preparing to power up – DC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306

Procedure 54

Turning DC power ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307

Procedure 55

Installing the software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309

Procedure 56

Testing Core/Net 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330

Procedure 57

Switching call processing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332

Procedure 58

Testing Core/Net 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333

Procedure 59

Testing module power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336

Procedure 60

Testing blower unit and thermal sensor . . . . . . . . . . . . . . . . . . . . . 337

Page 17 of 456

Communication Server 1000M and Meridian 1 Large System Installation and Commissioning

Procedure 61

Sysload test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339

Procedure 62

Testing system terminal and system monitor . . . . . . . . . . . . . . . . . 340

Procedure 63

Testing the PFTU and its interface . . . . . . . . . . . . . . . . . . . . . . . . . . 341

Procedure 64

Drilling concrete floors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 348

Procedure 65

Installing Kit A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349

Procedure 66

Installing Kit B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351

Procedure 67

Installing earthquake rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 352

Procedure 68

Leveling the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 357

Procedure 69

Installing a Floor Mounting Kit (NT8D64BF) . . . . . . . . . . . . . . . . . . . 359

Procedure 70

Adding a module to the base of a column . . . . . . . . . . . . . . . . . . . . 365

Procedure 71

Adding a module between two other modules . . . . . . . . . . . . . . . . 370

Procedure 72

Adding a module to the top of the column . . . . . . . . . . . . . . . . . . . . 374

Procedure 73

Connecting a Nortel CP PM Signaling Server . . . . . . . . . . . . . . . . . 392

Procedure 74

Connecting a CP PM Signaling Server to the ELAN and TLAN subnets of

a CS 1000E system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 393

Procedure 75

Connecting a CP PM Signaling Server to the ELAN and TLAN subnets of

a CS 1000M system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 395

Procedure 76

Connecting an IBM X306m Signaling Server . . . . . . . . . . . . . . . . . . 396

Page 18 of 456

NN43021-310 Standard 02.01 December 2007

Procedure 77

Connecting an HP DL320-G4 Signaling Server . . . . . . . . . . . . . . . . 398

Procedure 78

Installing Signaling Server software . . . . . . . . . . . . . . . . . . . . . . . . . 400

Procedure 79

Entering basic system configuration parameters . . . . . . . . . . . . . . 427

Procedure 80

Adding a Follower Signaling Server to an IP Telephony node . . . 441

Procedure 81

Logging in to the Signaling Server . . . . . . . . . . . . . . . . . . . . . . . . . . 446

Procedure 82

Verifying the Signaling Server Ethernet connection . . . . . . . . . . . . 447

Page 19 of 456

Communication Server 1000M and Meridian 1 Large System Installation and Commissioning

20

How to get help

This section explains how to get help for Nortel products and services.

Getting help from the Nortel Web site

The best way to get technical support for Nortel products is from the Nortel

Technical Support Web site:

www.nortel.com/support

This site provides quick access to software, documentation, bulletins, and

tools to address issues with Nortel products. More specifically, the site

enables you to:

• download software, documentation, and product bulletins

• search the Technical Support Web site and the Nortel Knowledge Base

for answers to technical issues

• sign up for automatic notification of new software and documentation for

Nortel equipment

• open and manage technical support cases

Getting help over the telephone from a Nortel Solutions

Center

If you don’t find the information you require on the Nortel Technical Support

Web site, and have a Nortel support contract, you can also get help over the

phone from a Nortel Solutions Center.

In North America, call 1-800-4NORTEL (1-800-466-7835).

Page 20 of 456 How to get help

NN43021-310 Standard 02.01 December 2007

Outside North America, go to the following Web site to obtain the phone

number for your region:

www.nortel.com/callus

Getting help from a specialist by using an Express Routing

Code

To access some Nortel Technical Solutions Centers, you can use an Express

Routing Code (ERC) to quickly route your call to a specialist in your Nortel

product or service. To locate the ERC for your product or service, go to:

www.nortel.com/erc

Getting help through a Nortel distributor or reseller

If you purchased a service contract for your Nortel product from a distributor

or authorized reseller, contact the technical support staff for that distributor

or reseller.

Page is loading ...

Nortel Networks 1000M User manual

This manual is also suitable for

Nortel Networks 1000M User manual

Related papers

Other documents