Panduit NK35MSCIW Installation guide

Panduit
Brand
Panduit
Model
NK35MSCIW
Category
Cable interface/gender adapters
Type
Installation guide
INSTALLATION INSTRUCTIONS NK397B
© Panduit Corp. 2008
NETKEY
NETWORK COMPONENTS
CONTRACTOR GRADE
E-mail:
[email protected]
Fax:
866-449-1702
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
Page 1 of 1
NETKEY Solder Type Connectors
Part Numbers: NKRSMB**Y, NKRSMR**Y, NK35MSS**
STEP ONE
A. SLIDE SOLDER RING, LOCKWASHER, AND NUT
ONTO SIGNAL WIRE.
B. PULL SIGNAL WIRE THROUGH MODULE.
C. LOOP WIRE THROUGH HOLE IN RCA AND TWIST.
D. SOLDER WIRE TO BACK OF RCA.
STEP TWO
A. ASSEMBLE SOLDER RING, LOCKWASHER, AND
NUT TO RCA-MODULE SUBASSEMBLY.
B. LOOP GROUND WIRE THROUGH SMALL HOLE IN
SOLDER RING AND TWIST.
C. SOLDER GROUND WIRE TO SOLDER RING.
STEP THREE
A. BEND SOLDER RING TAB 90°.
SOLDER RING
LOCKWASHER
NUT
90°
A. REFER TO FIG. 1 FOR WIRE PLACEMENT.
B. SOLDER WIRES TO CORRECT TABS ON THE BACK
OF CONNECTOR.
GROUND WIRE
Fig. 1
TIP (L)
SLEEVE
RING (R)
NETKEY Solder Type RCA Module
NETKEY 3.5mm(1/8") Solder Type Headphone Jack Module
(Ground)
- long pin
- gold pin
  • Page 1 1

Panduit NK35MSCIW Installation guide

Panduit
Brand
Panduit
Model
NK35MSCIW
Category
Cable interface/gender adapters
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents