2. Computers & electronics
  3. Telecom & navigation
  4. Mobile headsets
  5. Promate
  6. blueGear
blueGear

Promate blueGear User guide

  • Hello! I am an AI chatbot trained to assist you with the Promate blueGear User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
blueGear
User Guide
Multifunction Bluetooth
®
v4.0 Multipoint Headset
with Voice Prompt Technology & Docking Station
Introducon
The real definion of Mul-funcon embodies the Promate blueGear Bluetooth®
Headset. Running on Bluetooth® v4.0 with Mul-point Technology, it is engineered
for professionals that require the most demanding communicaon plaorm. Fits
precisely on the ear with an addional ear hook to set it in place, the blueGear
also sits on a docking staon for a stable charging input. Addionally it includes a
convenient car air condioning vent clip and a dash clip for a beer placement
inside the car. A Bluetooth® Headset that challenges the norms, Promate blueGear
simply gets the job done in an execuve style.
Packaging Content
• blueGear
• Docking charger
• Ear hook
• Ear bud
• Charging cable
• Air Vent Clip Holder
• User Guide
• Warranty Card
Specificaon:
• Bluetooth® version: v4.0
• Input Power: 3mW (speaker)
• Output Power: 3mW(chipset)
• Impedance: 32R
• Speaker Frequency: 20HZ-20KHZ
• Microphone Sensivity: -44+-3dB
• Signal-to-noise Rao: 80dB
• Charging Time: ≤ 2 Hours
• Playing Time: 5.5 hours around
• Baery Capacity: 3.7V ≥60mA/H
• Operang Distance: 10 M around
1
Features:
• Bluetooth® v4.0 with Mul-point Technology, connects to 2 Bluetooth® devices
• Voice Prompt Technology
• CVC Technology for noise and echo cancellaon
• Baery status indicator support for iOS devices
• With futurisc and innovavely designed charging dock
• Ear hook and car air condioning vent clip included
Compability:
blueGear may be paired as a headset to any compable Bluetooth® enabled devices.
Precauons
Please read all safety instrucons and warnings thoroughly before using this product.
Improper use of this product may result in damage to this or aached products. To
keep the product working at its opmum performance, never use it in the following
condions:
1. Moist or underwater condions.
2. Condions near the heater or high-temperature service.
3. Condions with direct sunshine.
4. Never dismantle the product without due permission, else this may nullify
warranty clauses.
2
Appearance & Interface Descripon:
1. Power Switch
2. Volume - Buon
3. Mul-Funcon Buon
4. Volume + Buon
5. Charging Dock
6. LED Charging status indicator
7. Micro-USB charging port
3
1
2
3
4
5
6
7
Operaon Instrucons:
1. Turning the blueGear On/Off
• Switch the power buon to the “On” state. The Blue LED will flash thrice to
indicate that the headset is switched on. You will also hear a prompt “Power On”.
• Switch the power buon to the “Off” state. The Red LED will flash thrice to
indicate that the headset is switched off. You will also hear a prompt “Power Off”.
2. Pairing blueGear with your Bluetooth® device
You are required to pair Mondo with your mobile phone once before using it.
• Press and hold the Mul-funcon buon for 5 seconds unl the blue LED
and red LED start flashing alternately to enter pairing mode.
• Acvate Bluetooth® on your mobile phone.
• Set your phone to discover ‘blueGear’ and follow the instrucons.
• If your phone asks for a passkey or PIN code, confirm with ‘0000’ (4 zeroes).
When the phone and blueGear are paired and connected, blue LED flashes twice.
3. Pairing blueGear with a second Bluetooth device(Mulpoint Pairing):
• Follow the above instrucons to pair the blueGear with the first device.
• Press and hold the Mul-funcon buon for 5 seconds unl the blue LED
and red LED start flashing alternately to enter pairing mode.
• Acvate Bluetooth® on your mobile phone.
• Set your phone to discover "blueGear" and follow the instrucons to pair
with the second device.
• Find the "blueGear" in the first device and pairing again.
• Two bluetooth device both connected now.
• If your phone asks for a passkey or PIN code, confirm with ‘0000’ (4 zeroes).
When the phone and blueGear are paired and connected, blue LED flashes twice.
4. Answering a call:
• With one phone connected
• Short press Mul-Funcon buon once to answer an incoming call.
4
• With two phones connected
• Short press Mul-Funcon buon once to answer an incoming call.
•
When you are on first phone and a call is coming on the second phone, press
mul-funcon buon twice to keep the first call and unswer the second call.
Press the mul-funciton buon once to end the second phone call and
connue the first call.
• Press and hold the Mul-funcon buon for two seconds during the first call to
reject the second call.
• Short press the Mul-funcon buon once to end the first call and answer the second call.
5. Rejecng a call:
• Press and hold the Mul-Funcon buon for 2 seconds to reject a call.
6. Using the Last number Re-Dialing feature (Available only with one phone connected)
• Short press Mul-Funcon buon twice to re-dial the last dialed number.
7. Adjusng the volume of the headset
• Press the volume (+) buon to increase the volume. Long press (+) to go to the next song.
• Press the volume (-) buon to decrease the volume. Long press (-) to go to
the previous song.
• Press the volume (-) buon to decrease the volume. Long press (-) to go to
the previous song.
8. Charging the blueGear
• Charging using the Micro-USB cable. Connect the Micro-USB connector to
the charging port of the blueGear to start charging the Bluetooth® device.
The LED is lit up in red while charging and LED will be off when charging is done.
• Charging using the docking charger. Connect the Micro-USB connector on
the docking charger and dock the blueGear onto it. The LED is lit up in red
while charging and LED will be off when charging on the Bluetooth device is
done. The LED on the docking charging will lit up in blue all the me even if
the charging on the blueGear is done.
5
• With two phones connected
• Short press Mul-Funcon buon once to answer an incoming call.
• When you are on first phone and a call is coming on the second phone, press
mul-funcon buon twice to keep the first call and unswer the second call.
Press the mul-funciton buon once to end the second phone call and
connue the first call.
• Press and hold the Mul-funcon buon for two seconds during the first call to
reject the second call.
• Short press the Mul-funcon buon once to end the first call and answer the second call.
5. Rejecng a call:
• Press and hold the Mul-Funcon buon for 2 seconds to reject a call.
6. Using the Last number Re-Dialing feature (Available only with one phone connected)
• Short press Mul-Funcon buon twice to re-dial the last dialed number.
7. Adjusng the volume of the headset
• Press the volume (+) buon to increase the volume. Long press (+) to go to the next song.
• Press the volume (-) buon to decrease the volume. Long press (-) to go to
the previous song.
• Press the volume (-) buon to decrease the volume. Long press (-) to go to
the previous song.
8. Charging the blueGear
• Charging using the Micro-USB cable. Connect the Micro-USB connector to
the charging port of the blueGear to start charging the Bluetooth® device.
The LED is lit up in red while charging and LED will be off when charging is done.
• Charging using the docking charger. Connect the Micro-USB connector on
the docking charger and dock the blueGear onto it. The LED is lit up in red
while charging and LED will be off when charging on the Bluetooth device is
done. The LED on the docking charging will lit up in blue all the me even if
the charging on the blueGear is done.
/