Vulcan Hart VSX24D Datasheet
- Category
- Water heaters & boilers
- Type
- Datasheet
This manual is also suitable for
Item # __________________________
C.S.I. Section 11420
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
A2780
ISO9001
Vulcan-Hart Co.
F-32480 (12-01)
SPECIFICATIONS:
Direct steam convection steamer, Vulcan-Hart Model No.
(VSX24D) (VSX24D5). Stainless steel frame, exterior and
6" adjustable legs with flanged feet. Two stainless steel cooking
compartments with coved interior corners. 1
1
/4" drain in each
compartment. Heavy duty stainless steel "slammable" doors can
be opened and closed at anytime during the cooking cycle.
Steam shuts off when door(s) are opened. Compartment controls
include 60 minute dial timer with buzzer, green "ready" and red
"cooking" indicator lights. Convection steamer mounted on 28"
high base cabinet with stainless steel front full height doors,
slip-off stainless steel side and aluminized steel rear panel with
welded 6" stainless steel legs rear with flange foot and front with
bullet. Direct steam supply at 10 to 50 PSI with a flow of 138 lbs.
steam/hr.
Exterior dimensions:
VSX24D: 24"w x 33"d x 60
3
/8"h.
VSX24D5: 24"w x 33"d x 73"h.
U L listed. Classified by UL to NSF Std. #4. Meets ASME code.
VSXD SERIES
DIRECT STEAM CONVECTION STEAMER
ON CABINET BASE
MODELS: VSXD SERIES
Direct Steam Convection Steamer on Cabinet Base
■■ VSX24D 24" wide base, 6 pan capacity
■■ VSX24D5 24" wide base, 10 pan capacity
STANDARD FEATURES
■ Stainless steel frame, exterior and 6" adjustable legs with
flanged feet.
■ Two stainless steel cooking compartments with coved interior
corners. Each compartment accepts:
- 1" deep pans (6 - VSX24D) (10 - VSX24D5)
-2
1
/2" deep pans (3 - VSX24D) (5 - VSX24D5)
- 4" deep pans (2 - VSX24D) (3 - VSX24D5)
■ 1
1
/4" drain in each compartment.
■ Heavy duty stainless steel "slammable" doors can be opened
and closed at anytime during the cooking cycle. Steam shuts
off when door(s) are opened.
■ Compartment controls include 60 minute dial timer with
buzzer, green "ready" and red "cooking" indicator lights.
■ Convection steamer mounted on 28" high base cabinet with
stainless steel front full height doors, slip-off stainless steel
side and aluminized steel rear panel with welded 6" stainless
steel legs rear with flange foot and front with bullet.
■ Direct steam supply at 10 to 50 PSI with a flow of 138 lbs.
steam/hr.
■ One year limited parts and labor warranty.
OPTIONS
■■ Stainless steel cabinet back.
■■ Correction facility package:
a. Security type tamper resistant fasteners with tack welds.
b. Control cover with hasp (lock by others).
c. Cabinet door with hasp (lock by others).
■■ Step down transformer for control circuit if higher than
120 volts.
■■ Mount and interconnect boiler base with kettle at factory.
Includes steam supply piping. Shipped on one skid.
■■ Second year extended limited parts and labor warranty.
ACCESSORIES
■■ Interconnecting steam supply plumbing between VSX
steamer and free standing kettle. Kettle must be within 2 feet
to left or right.
Printed On Recycled Paper
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and
specifications without notice.
F-32480 (12-01)
VSXD SERIES
DIRECT STEAM CONVECTION STEAMER
ON CABINET BASE
DIRECT STEAM DATA:
Steam supply to the steamer must:
1. Maintain a steady 10 to 50 psi flow under operating conditions.
2. Have a minimum flow rate of 200 lbs. per hour, dry steam.
3. Be adequately trapped to provide dry steam.
4. Provide a service shut-off valve.
SERVICE CONNECTIONS:
Steam Supply:
3
/4" NPT for 10 - 50 psi direct steam.
Electric Connection for Controls: 120/60/1, 300 watt maxi-
mum power supply with grounding wire required. (For other
than 120 volt supply, consult factory for location of this
conneciton.)
Drain: Condenser box, compartment and boiler, 1
1
/4" NPT.
(Provide an open air gap type drain within 12" of condenser
box and for best results at a distance so that steam vapors will
not enter the steamer from underneath the control area. Do not
connect solidly to any drain connection.)
Cold Water Connection:
3
/8" NPT for condensate box. Inlet
water pressure between 20 and 80 psi.
Steam Take-Off Connection:
3
/4" NPT.
NOTE:
• Dimensions which locate the above connections have a tolerance of
+ or -3" (+ or -75 mm).
• Installation of backflow preventers, vacuum breakers and other
specific code requirements is the responsibility of the owner and
installer. It is the responsibility of the owner and installer to comply with
local codes.
• Plastic drains are not recommended due to inherent limited tempera-
tures of the plastic. Boiler purge temperatures may exceed 180°F.
The installer may be required to provide means to reduce boiler purge
water temperature to be that of the condensate temperature of 140°F
or less.
• This appliance is manufactured for commercial installation only and is
not intended for home use.
PAN CAPACITIES (Per compartment)
MODEL 1" deep 2
1
/2" deep 4" deep
VSX24D 63 2
VSX24D5 10 5 3
-
1
-
2
Vulcan Hart VSX24D Datasheet
- Category
- Water heaters & boilers
- Type
- Datasheet
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Vulcan Hart FSP18FB Datasheet
-
-
-
-
Vulcan-Hart VSX42ET Specification
-
-
-
-
-