8000 mAh Portable Battery Charger
qsg Q10232 Copyright © 2011 Aluratek, Inc. All Rights Reserved.
aluratek.com
Quick Start Guide
APB02F
Product Application
Operation
Charging the battery pack
- Use the included USB cable to charge the battery pack
- Connect the Micro USB tip to the Micro USB port on the battery
- Connect the USB Type A tip to a USB port on your computer or laptop. Use of an
AC - USB Adapter is also acceptable
- The power status LEDs will light up according to charging capacity
Charging your digital device
- Use the original cable that came with your device or a cable with suitable connector
- Connect the USB tip to one of the USB Output ports on the battery pack
- Press the ON / OFF button to start charging the device
Empty <30% capacity
For more information, please visit: http://aluratek.com/warranty-return-policy
You can register your product online at: http://aluratek.com/product-registration
E-mail: [email protected]
Web: www.aluratek.com/support
Local (Tustin, CA): 714-586-8730
Toll free: 1-866-580-1978
Aluratek warrants this product against defect in material or workmanship for
1 Year from the date of purchase.
If you need further assistance, please contact the Aluratek support department for
troubleshooting prior to returning this device.
*Original charging cable required
Charge up to two devices at
the same time*
Charge your battery
with the included
Micro USB cable
On - Off button with
power level indicators
30 - 80% capacity >80% capacity
Tech Support & Warranty Information
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Aluratek ABH02F User guide
-
Aluratek bump AWS02F Quick start guide
-
Aluratek ADMPF108F Instructional Manual
-
-
Aluratek ABS02F User guide
-
Aluratek AEBK01WF Owner's manual
-
-
Aluratek iStream AIS01F User guide
-
-