2. Computers & electronics
  3. Computer components
  4. System components
  5. Interface cards/adapters
  6. Addonics
  7. ADSAU3

Addonics ADSAU3 User manual

  • Hello! I am an AI chatbot trained to assist you with the Addonics ADSAU3 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v7.1.11
www.addonics.com
T E C H N O L O G I E S
User Guide
SATA to USB 3.0 Converter
(ADSAU3)
www.addonics.com
Phone: 408-573-8580
Fax: 408-573-8588
Email: http://www.addonics.com/sales/query/
CONTACT US
Installation Instructions
1. Locate the SATA connector of your SATA drive.
2. Connect the converter board to the SATA connector of the hard drive.
3. Using the 15-pin SATA power connector from the power supply, connect it to the power
connector on the converter. This will provide power to the converter and to the hard
drive.
4. Plug-in a USB3.0 cable to the USB3.0 receptacle on the converter and connect the other
end of the cable to a USB2.0/3.0 port on your system.
15-pin SATA Power &
7-pin Data Connector
USB 3.0 Receptacle
15-Pin SATA Power Plug Connected to Power Supply
Drive Activity LED connector
+ -
SATA Hard Drive Power and Data Connector
/